Aprima Medical Software, Inc

Cryo-Condensation May be the Most Cost-Effective Method to Reduce VOCs

Linde Process Give Nitrogen Double Duty for Efficiency and Economics Bridgewater, N.J., U.S. – Cryogenic cooling, or cryo condensation, just may be the most cost-effective method for minimizing volatile organic chemical (VOC) emissions from solvent and hydrocarbon storage tanks and manufacturing processes when certain conditions exist, according to a white paper authored by Robert D’Orazio,...

Larson Electronics' Fluorescent Fixtures to be Featured in War for the Planet of the Apes"

Larson Electronics, an industrial lighting leader, has announced that their four foot, two lamp fluorescent light fixtures will be featured in the new “War for the Planet of the Apes” film set to be released in July 2017. Under the working title “Hidden Fortress”, filming for the third installment of the “Planet of the Apes” commenced in the Lower Mainland of Vancouver in October...

Bearing-less Encoder optimizes vector motor control.

Designed for mounting on NEMA standard 8.5 in. C-Face, MRI 2850 offers motion feedback solution in applications such as large rotating machinery found in construction, pulp and paper, oil and gas, wind, and marine industries. Magnetic code-wheel supports shaft sizes from 1–4 in. without need for stub shaft. One or two independent read-heads can be provided, each with any resolution from...

Constructed- with 4 in. insulated walls, aluminized steel exterior, and stainless steel interior, No. 866 offers 18 in. x 20 ft x 15 in. workspace, 60 KW installed in Nichrome wire heating elements, and 4,200 cfm, 3 hp recirculating blower that provides vertical downward airflow. Oven travel comprises 1 ½ ft long open belt loading zone, 20 ft long insulated heat zone with recirculated...

Bore Finishing Machine laps and air gages bores in one setup.

Designed for 0.26–0.70 in. diameter workpieces, SVL-2115 Multi-Stage Automated Lapping Machine provides single setup processing of hydraulic valves, sleeves, fuel system components, and other parts that are prone to distortion when honed. System accommodates workpiece lengths up to 12 times bore diameter, not to exceed 7.87 in. Spindle speed range is 100–2,000 rpm during lapping, but is...

ATX PC Power Supply features additional 24 V output.

Santa Clara, California, USA-- Tumbler Technologies + TRUMPower introduces the TIPC400-24, which is a 400W ATX PC power supply with 24V output to its product line-up. With its 90-264 VAC universal input and active PFC, the power supply meets EN 61000-3-2 standards. The unit also reaches 80PLUS Bronze efficiency level. The TIPC400-24 is approved to UL/IEC/EN 60950-1 2nd edition standards and...

COAX/RJ45 Switch features RS232 remote control.

Allowing conversion and connection to any 1 of 8 RJ45 Cat 6 interface devices from 1 Common COAX interface device, Model 7383 eliminates need to plug/unplug cables. Two pins of RJ45 interface are switched via break-before-make electromechanical relays and switch ports are transparent to all data. Remote control is performed via DB9 female connector on rear panel, accepting ASCII RS232 Serial Data...

Automatic Washability Tester performs tests on coated panels.

Driven by micro-step controlled electronic motor, Automatic Washability Tester can perform abrasion and washability tests on coated panels to define resistance of paint, varnish, or related products to scratching, wearing, and color loss due to wet or dry abrasion. Test is either used as pass/fail by testing to specified number of strokes, or defining minimum number of strokes at which coating...

Capped Elbows are designed for use in hazardous locations.

Producto Electric Corporation, Orangeburg, NY announces Malleable Iron Capped Elbows for rigid wiring systems in Hazardous Locations have been added to their expanding line of Explosion Proof products. Explosion Proof Capped Elbows, available in 1/2 , 3/4", 1" and 1-1/4" trade sizes are UL Listed for: Class I, Group C, D Class II, Group E, F, G Class III Featuring a heavy malleable iron...

Bearing-less Encoder optimizes vector motor control.

Designed for mounting on NEMA standard 8.5 in. C-Face, MRI 2850 offers motion feedback solution in applications such as large rotating machinery found in construction, pulp and paper, oil and gas, wind, and marine industries. Magnetic code-wheel supports shaft sizes from 1–4 in. without need for stub shaft. One or two independent read-heads can be provided, each with any resolution from...