Aprima Medical Software, Inc

Qosina Expands Its ENFitT Product Line
Construction Equipment and Supplies

Qosina Expands Its ENFitT Product Line

Qosina has added a number of components to its extensive ENFitT product line, including male and female connectors and caps, low dose syringes, spikes, adapters and Y connectors. ENFitT is a brand of enteral feeding connectors that meet the ISO 80369-3 standard, which was developed to improve patient safety and reduce the risk of small-bore misconnections used in liquid and gas healthcare...

Read More »
Qosina Expands Its ENFitT Product Line
Construction Equipment and Supplies

Qosina Expands Its ENFitT Product Line

Qosina has added a number of components to its extensive ENFitT product line, including male and female connectors and caps, low dose syringes, spikes, adapters and Y connectors. ENFitT is a brand of enteral feeding connectors that meet the ISO 80369-3 standard, which was developed to improve patient safety and reduce the risk of small-bore misconnections used in liquid and gas healthcare...

Read More »
Lindberg/MPH Air Atmosphere Box Furnace Available for Immediate Shipment
Thermal & Heating Equipment

Lindberg/MPH Air Atmosphere Box Furnace Available for Immediate Shipment

May 1, 2017 – Lindberg/MPH has an air atmosphere box furnace in stock that is available for immediate shipment. The atmosphere box furnace provides flexible, efficient performance in a variety of heat treating applications along with simple economical operation. This furnace features a fast heating rate and heavy load capacity for increased productivity. Model Number: 11-ROMT-243624-20 Job...

Read More »
Lindberg/MPH Air Atmosphere Box Furnace Available for Immediate Shipment
Thermal & Heating Equipment

Lindberg/MPH Air Atmosphere Box Furnace Available for Immediate Shipment

May 1, 2017 – Lindberg/MPH has an air atmosphere box furnace in stock that is available for immediate shipment. The atmosphere box furnace provides flexible, efficient performance in a variety of heat treating applications along with simple economical operation. This furnace features a fast heating rate and heavy load capacity for increased productivity. Model Number: 11-ROMT-243624-20 Job...

Read More »
Baseband Video and Stereo Audio Baluns
Electronic Components & Devices

Baseband Video and Stereo Audio Baluns

Baluns that save time and money! The ETS Baseband Video/Stereo Audio Baluns are used for point-to-point replacement of coaxial (video) and shielded (high impedance audio) cables with Category5 or better UTP wiring. The AV900 Balun Series is designed for installations that have a need for separate audio channels. As an example, the AV905 and AV906 allow you to send two channels each of baseband...

Read More »
Baseband Video and Stereo Audio Baluns
Electronic Components & Devices

Baseband Video and Stereo Audio Baluns

Baluns that save time and money! The ETS Baseband Video/Stereo Audio Baluns are used for point-to-point replacement of coaxial (video) and shielded (high impedance audio) cables with Category5 or better UTP wiring. The AV900 Balun Series is designed for installations that have a need for separate audio channels. As an example, the AV905 and AV906 allow you to send two channels each of baseband...

Read More »
Indium Corporation to Feature MEMS Microphone Lid-Attach Indium8.9HF Solder Paste at MEMS and Sensors Technology Symposium 2017
Materials

Indium Corporation to Feature MEMS Microphone Lid-Attach Indium8.9HF Solder Paste at MEMS and Sensors Technology Symposium 2017

Indium Corporation will feature its MEMS microphone lid-attach Indium8.9HF Solder Paste at MEPTEC’s 15th Annual MEMS and Sensors Technology Symposium on June 6, in San Jose, Calif. Indium8.9HF is a no-clean, halogen-free (no intentionally added, halogen-free flux) solder paste that enables dispensing of fine lines and shapes down to a width of less than 150 microns. Indium8.9HF provides...

Read More »
Indium Corporation to Feature MEMS Microphone Lid-Attach Indium8.9HF Solder Paste at MEMS and Sensors Technology Symposium 2017
Materials

Indium Corporation to Feature MEMS Microphone Lid-Attach Indium8.9HF Solder Paste at MEMS and Sensors Technology Symposium 2017

Indium Corporation will feature its MEMS microphone lid-attach Indium8.9HF Solder Paste at MEPTEC’s 15th Annual MEMS and Sensors Technology Symposium on June 6, in San Jose, Calif. Indium8.9HF is a no-clean, halogen-free (no intentionally added, halogen-free flux) solder paste that enables dispensing of fine lines and shapes down to a width of less than 150 microns. Indium8.9HF provides...

Read More »
Colorite Features New Thermoplastic Elastomer Compound Line for Medical Devices at MD&M East
Adhesives & Sealants

Colorite Features New Thermoplastic Elastomer Compound Line for Medical Devices at MD&M East

Wayne, Pa. (May 2, 2017) - A line of thermoplastic elastomer (TPE) compounds for medical device applications in North America will be featured by Colorite, a Tekni-Plex company, at MD&M East, June 13-15, Jacob Javits Convention Center, New York City, in Booth 1445. Cellene™ TPE compounds are suitable for a wide variety of uses in medical devices, packaging and other regulated markets....

Read More »
Colorite Features New Thermoplastic Elastomer Compound Line for Medical Devices at MD&M East
Adhesives & Sealants

Colorite Features New Thermoplastic Elastomer Compound Line for Medical Devices at MD&M East

Wayne, Pa. (May 2, 2017) - A line of thermoplastic elastomer (TPE) compounds for medical device applications in North America will be featured by Colorite, a Tekni-Plex company, at MD&M East, June 13-15, Jacob Javits Convention Center, New York City, in Booth 1445. Cellene™ TPE compounds are suitable for a wide variety of uses in medical devices, packaging and other regulated markets....

Read More »

All Topics