Aprima Medical Software, Inc

C3M0075120K SiC Power MOSFET provides 58 pF output capacitance.
Electronic Components & Devices

C3M0075120K SiC Power MOSFET provides 58 pF output capacitance.

Housed in four-lead TO-247-4 package with separate driver source pin, C3M0075120K C3M™ SiC Power MOSFET features 8 mm creepage distance between drain and source. Offering continuous drain current of 30.8 A and 1200 V drain source voltage, unit comes with 220 nC reverse-recovery charge and 18 ns reverse-recovery time. MOSFET provides 75 mΩ and 51 nC of Rds (on) total gate charge (Qg)...

Read More »
C3M0075120K SiC Power MOSFET provides 58 pF output capacitance.
Electronic Components & Devices

C3M0075120K SiC Power MOSFET provides 58 pF output capacitance.

Housed in four-lead TO-247-4 package with separate driver source pin, C3M0075120K C3M™ SiC Power MOSFET features 8 mm creepage distance between drain and source. Offering continuous drain current of 30.8 A and 1200 V drain source voltage, unit comes with 220 nC reverse-recovery charge and 18 ns reverse-recovery time. MOSFET provides 75 mΩ and 51 nC of Rds (on) total gate charge (Qg)...

Read More »
E-Weld Plasma™ Solution inhibits the adherence of slag.
Paints & Coatings

E-Weld Plasma™ Solution inhibits the adherence of slag.

Used as protection for laser and plasma cutting tools, E-Weld Plasma™ Solution is a label free product which can be applied in minutes and dries quickly. Using ergonomic arm-mounted applicator, users can coat 500 sq-ft areas quickly. Product is water-based, ceramic and anti-splatter solution and can be applied to surrounding equipment which are exposed to weld spatter of slag.

Read More »
E-Weld Plasma™ Solution inhibits the adherence of slag.
Paints & Coatings

E-Weld Plasma™ Solution inhibits the adherence of slag.

Used as protection for laser and plasma cutting tools, E-Weld Plasma™ Solution is a label free product which can be applied in minutes and dries quickly. Using ergonomic arm-mounted applicator, users can coat 500 sq-ft areas quickly. Product is water-based, ceramic and anti-splatter solution and can be applied to surrounding equipment which are exposed to weld spatter of slag.

Read More »
Angle Head Systems feature onboard braking system.
Architectural & Civil Engineering Products

Angle Head Systems feature onboard braking system.

Available in Flex 5 and Flex 5 Plus models, Angle Head Systems come with saw blade flange with flush-mount ER25 nut and collet system. Providing 0 to 90 degrees sawing swivel range and 0 to 100 degrees routing swivel range, units use movement of C-axis for changing output angle. Offering rotation speed of 15,000 RPM and 1 to 1 gear ratio, angle heads offer 15 sec tool change output connections...

Read More »
Angle Head Systems feature onboard braking system.
Architectural & Civil Engineering Products

Angle Head Systems feature onboard braking system.

Available in Flex 5 and Flex 5 Plus models, Angle Head Systems come with saw blade flange with flush-mount ER25 nut and collet system. Providing 0 to 90 degrees sawing swivel range and 0 to 100 degrees routing swivel range, units use movement of C-axis for changing output angle. Offering rotation speed of 15,000 RPM and 1 to 1 gear ratio, angle heads offer 15 sec tool change output connections...

Read More »
EV6500 UV Inspection Lamps eliminate need of separate overhead lamps.
Architectural & Civil Engineering Products

EV6500 UV Inspection Lamps eliminate need of separate overhead lamps.

Providing 450 cm^2 of intense UV illumination area, EV6500 UV Inspection Lamps feature reinforced construction, sealed housing, fan-less cooling system and non-clouding lens. Used for NDT environments, units deliver 100 ft-candles of light out to 16-in. diameter. Enabling clear visibility even at the edge of 25 cm beam, lamps deliver 7,000 μW/cm^2 high intensity UV-A illumination.

Read More »
EV6500 UV Inspection Lamps eliminate need of separate overhead lamps.
Architectural & Civil Engineering Products

EV6500 UV Inspection Lamps eliminate need of separate overhead lamps.

Providing 450 cm^2 of intense UV illumination area, EV6500 UV Inspection Lamps feature reinforced construction, sealed housing, fan-less cooling system and non-clouding lens. Used for NDT environments, units deliver 100 ft-candles of light out to 16-in. diameter. Enabling clear visibility even at the edge of 25 cm beam, lamps deliver 7,000 μW/cm^2 high intensity UV-A illumination.

Read More »

All Topics