Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
3U VPX Ethernet Switch consumes less than 40 W power.
Available in five air-cooled and rugged conduction-cooled versions, NETernity™ SWE440 3U VPX 10/40 Gigabit Ethernet Switch enables single board computers, graphics cards, sensor I/O cards to pass data at multi-Gigabit speeds. Supporting up to eight 40 Gigabit Ethernet ports or up to 32 10 Gigabit Ethernet ports, unit provides range of network protocol support for Layer 2 and Layer 3...
Read More »
VG380 Vertical Gyro Modules offers two interface options.
Available in VG380SA and VG380ZA packages, VG380 Vertical Gyro Modules offer static and dynamic accuracy of ±0.2 and ±1.0 degrees respectively. Compatible with power supplies from 9 to 32V, VG380SA module measures 41 x 48 x 22 mm size whereas VG380ZA module 24 x 37 x 9.5 mm dimensions. VG380ZA feature SPI/UART interface. Suitable for unmanned aerial vehicle and construction equipment...
Read More »
VG380 Vertical Gyro Modules offers two interface options.
Available in VG380SA and VG380ZA packages, VG380 Vertical Gyro Modules offer static and dynamic accuracy of ±0.2 and ±1.0 degrees respectively. Compatible with power supplies from 9 to 32V, VG380SA module measures 41 x 48 x 22 mm size whereas VG380ZA module 24 x 37 x 9.5 mm dimensions. VG380ZA feature SPI/UART interface. Suitable for unmanned aerial vehicle and construction equipment...
Read More »
KU-3 Viscometer comes with KU-1030 Krebs spindle.
Suitable for measurement of paints, coatings, inks, adhesives and pastes, KU-3 Viscometer’s LED display shows choice of Krebs units (40 to 141 KU), grams of weight (32 to 1099 g) and centipoise (27 to 5274cP). Enabling rapid spindle attachment and release before and after the test, product comes with Krebs-type-Spindle and adapters for pint and half pint cans.
Read More »
KU-3 Viscometer comes with KU-1030 Krebs spindle.
Suitable for measurement of paints, coatings, inks, adhesives and pastes, KU-3 Viscometer’s LED display shows choice of Krebs units (40 to 141 KU), grams of weight (32 to 1099 g) and centipoise (27 to 5274cP). Enabling rapid spindle attachment and release before and after the test, product comes with Krebs-type-Spindle and adapters for pint and half pint cans.
Read More »
Xtrakt™ Extraction System improves operator safety.
Providing complete extraction of low- and high- viscosity liquids such as lotions, creams and gels, Xtrakt™ Extraction System reduces residual product remain of less than 2 kg in 1,200 L liner. Operates using normal plant air, Grayling Xtrakt liners and Xtrakt drive system are designed to work together. Capable of extracting liquids up to 400,000 cP, product is suitable for personal care,...
Read More »
Xtrakt⢠Extraction System improves operator safety.
Providing complete extraction of low- and high- viscosity liquids such as lotions, creams and gels, Xtrakt™ Extraction System reduces residual product remain of less than 2 kg in 1,200 L liner. Operates using normal plant air, Grayling Xtrakt liners and Xtrakt drive system are designed to work together. Capable of extracting liquids up to 400,000 cP, product is suitable for personal care,...
Read More »
Battery Holders feature nickel plated spring contacts.
Featuring PCB connector plug pre-installed to 6 in. wire terminations, Battery Holders are molded form Polypropylene or ABS with polarity tabs and markings. Designed with UL 94V-0 flammability rated Nylon 6/6 PC connector plug, units can accommodate cylindrical batteries such as AA, AAA, CR2, 12v and N cells. Product is available for 1 or 4 cell configurations.
Read More »
Battery Holders feature nickel plated spring contacts.
Featuring PCB connector plug pre-installed to 6 in. wire terminations, Battery Holders are molded form Polypropylene or ABS with polarity tabs and markings. Designed with UL 94V-0 flammability rated Nylon 6/6 PC connector plug, units can accommodate cylindrical batteries such as AA, AAA, CR2, 12v and N cells. Product is available for 1 or 4 cell configurations.
Read More »
TRIBOS Precision Tool Holders are available for HSK-E 20 interface.
TRIBOS Precision Tool Holders are available in Mini and RM series models. Designed for high-speed spindle interface and micro applications, TRIBOS-Mini models are standardized with 1 mm, 1.5 mm, 2 mm, 3 mm, 4 mm, 6 mm, and 1/8 in. diameters. Available with 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, and 1/8 in. diameters, TRIBOS-RM models can be combined with TRIBOS-SVL Mini tool extension and comes...
Read More »