Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Laser System reveals invisible surface finish.
Class II, CE-certified OPTI-Scan can be configured to check any machined part surface and render go/no-go signal. It utilizes lasers arranged around part fixture, each aimed at machined surface of workpiece. System is first shown pre-finished master part and then properly finished master part. Quality of reflected light indicates whether surface has been correctly finished, and results are...
Read More »SL Photopolymer can be used on all solid-state platforms.
RenShapeÃ-® SL 7585 photopolymer, formulated to release bubbles before processing to increase throughput, is suited for building master models and prototypes. Thermoplastic-like stereolithography (SL) material is clear amber in vat and turns white as it is exposed to laser light used in curing process. After full cure, parts built with material exhibit Shore hardness of 84D, tensile strength...
Read More »
Absolute Multi-Turn Encoder offers 33-bit resolution.
Weighing 1.0 oz, Series TRD-M35A features 1.5 in. OD modular kit design and 0.02 in. wide air gap. It provides 17-bit resolution for single turn and 16-bit for multi-turns. Equipped with serial communication interface, user can configure up to 8 axes through Bus connection with LSI signal receiver chip. Response turn speed is 6,000 rpm under normal operating conditions and 10,000 rpm during...
Read More »
Acoustic Sensor features European ATEX II 3D approval.
Used for continuous solids flow detection, SITRANS AS 100 is certified for use in hazardous areas and conditions where explosive dust may be present. It detects changes in high-frequency, structure borne sound waves from equipment and materials in motion, reacting instantly to changes in solids flow to warn of blockages, product absence, or equipment failure. Unit features 0-10 Vdc analog output,...
Read More »
Modular Hoist can be configured to customer requirements.
Offering fully modular vertical transport solution, Scando 650 is available in single- or twin-car configurations, with 2-motor DOL, 2-motor FC, or 3-motor FC. Units offer payloads of 1,500-3,200 kg/car, speeds up to 65 m/min, and maximum lifting height of 400 m. Various types of doors and gates are available.
Read More »
Software delivers CNC machine simulation and optimization.
VERICUT v6.0 simulates CNC control G-code programs to provide virtual machining environment, and simulates CNC machining to detect errors, collisions, or areas of inefficiency. With project tree, users can view and configure multiple setups. Once user selects CNC machine configuration, stock, fixture, and design component information is attached to machine, ready to simulate machining operations....
Read More »
LED Modules link together for signs and displays.
Super White STP30XC Hi-Flux StripLEDÃ-® Modules may be used alone or connected to one another, enabling configuration of channel and reverse-channel letters, signs, and displays. Available in lengths of 6, 12, and 24 in., strips feature 6, 12, and 24 Cool White 7,500 K SpiderLEDs, respectively. Each module includes double-ended connector harness for daisy-chain assembly, and pre-applied strip...
Read More »
Spray Nozzle fits in tight spaces.
Air atomizing Model 29JAUCO offers cycling speeds from continuous to 1,000 cycles/min. To minimize profile, all mounting and inlet connections are located at back of nozzle body. Built-in, clean-out needle automatically activates during spray cycle to protect against clogging, while Drip-freeÃ-® seal stops liquid flow quickly and completely. Nozzle is suited for high-speed, short duration...
Read More »
Enamel Coating dries to touch in 15 minutes.
Suited for interior or exterior use, KEM 4000 High Solids Acrylic Alkyd Enamel provides high gloss and is VOC-compliant. For light service environments, product may be applied directly to steel without primer. Coating is ready to use with no mixing of additional components, and can be tinted to broad range of colors. KEM 4000 is suited for general metal applications including steel decking,...
Read More »
Software helps improve surface finish and cycle times.
With Servo and Spindle High-Response Vector Software v4.0, high-speed and high-precision machining is achieved via use of servo processor at nanometer level of interpolation. It utilizes 16 mm count pulse coders, resonance filters, DSP technology, and FANUC FSSB communication system. Software can close current loop in 31.25 Ã-µs, velocity loop at 62.5 Ã-µs, and position loop at 250...
Read More »