Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Penetrant frees rusted components.
VpCI(TM) Super Penetrant breaks through Ã-½ in. rust in 30 min, displacing moisture and water, and lubricating metal so frozen parts can move freely. Product forms ultra thin film on metal that offers up to 3 months of protection against re-rusting and further corrosive attack. Suited for indoor and outdoor uses, penetrant can be applied by brush, squirt, hand pump spray, aerosol, and spray...
Read More »
POL Converters feature footprints down to 0.9 x 0.33 in.
Designed for applications with limited board space, PTV series is comprised of 8 vertical-mount, non-isolated point-of-load (POL) dc/dc converters with efficiencies up to 94%. Units feature power conversion and control technology with Auto-Track(TM) power sequencing and pre-bias start-up capability. Taking up as little as 0.3 in.Ã-² PCB real estate, series offers current outputs of 8, 16, and...
Read More »
AC Servo Systems provide 0.08-26.4 lb-ft of peak torque.
SureServo(TM) digital brushless servo systems include 8 servo motors, in brake and non-brake models, that can be operated with 1 of 3 servo drives. Systems range from 100 W to 3 kW continuous power, and can be controlled in position, velocity, or torque mode. Utilizing 8 programmable inputs and 5 programmable outputs, real-time connectivity with any control system is assured. Configuration and...
Read More »
Lubricant is packaged with permanently attached straw.
WD-40Ã-® Smart Straw sprays as stream through permanently attached straw for hard-to-reach jobs, or when straw is folded down, via wide-area sprayer to cover large surface area. Product comes in 12-pack cases, 40-count floor stands, and 150-count half-stacks.
Read More »
Laser Meter includes PC host interface.
Featuring analog output, FieldMaxII(TM) is available in power-only, energy-only, or power and energy configurations. Thermopile, pyroelectric, and semiconductor sensors enable unit to measure UV, visible, and IR laser output from nW to kW range, and to work with CW and pulsed lasers with repetition rates up to 300 Hz. LabVIEW Instrument driver and ActiveX DLL Server component facilitate...
Read More »
MIG Gun Liners facilitate changeover.
Jump Liners connect with standard liners at base of Q(TM)-gun's rotatable neck and run through most common wear point up to contact tip. Q-Gun neck separates from handle without tools for liner changeover. When Jump Liner becomes worn or contaminated, operator detaches Q-Gun's neck from handle, replaces only Jump Liner, and reattaches neck, eliminating need to replace entire 15 ft of standard...
Read More »
Panel PCs feature integrated display.
Offered with full bandwidth of processors from 400 MHz Celeron to 1.6 GHz Pentium M, fanless Panel PCs are available as touch devices with 10.4 in. VGA, 12.1 in. SVGA, or 15 in. XGA TFT display. Units range from flat devices without PCI slot to expandable devices with 2 PCI slots. Integrated Compact Flash slot can be expanded with second Compact Flash slot or hard disk, and PCs with 2 PCI slots...
Read More »Software lets engineers visualize and test product designs.
Interactive CAE modeler, MSC.Patran 2005 r2 allows users to interface with CAD environments and CAE tools including MSC.Nastran, MSC.Marc, MSC.Dytran, and 3rd party tools. Engineers can mesh and re-mesh surfaces containing gaps, overlaps, sliver surfaces, and non-congruencies without manual editing and preparation. Software supports MSC.Nastran SOL 600 and SOL 700 nonlinear analysis capabilities,...
Read More »
Rigid Couplings suit motion control applications.
Offered in aluminum, black oxide carbon steel, and stainless steel, 1- and 2-piece Rigid Couplings come in straight and step bore combinations to fit shaft sizes from 1/8-2 in. and 3-50 mm. Featuring precision-honed bores, couplings are torsionally rigid with virtually zero windup under torque loads, but are also rigid under loads caused by misalignment. Screws have Nypatch treatment to prevent...
Read More »
Carbide Material helps improve wear part performance.
Suited for use in manufacture of low-impact wear parts, Cerbide(TM) polycrystalline tungsten carbide combines properties of ceramics and cemented tungsten carbide. Product exhibits abrasion and erosion resistance in wet and dry applications and demonstrates corrosion resistance in acids and caustic solutions.
Read More »