Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
New FWA8800 Network Appliance by IBASE Technology Features 16 Gigabit Ethernet Ports
The new FWA8800 by IBASE Technology is the first network appliance with an AMD EPYC embedded 3000 series processor. The network appliance also features an IBASE MBN806 motherboard, an option for four instead of two NIC modules for 32 MbE ports, an optional IPMI 2.0 module, a PCIe slot, an M.2 slot, SATA III ports, and USB ports. The FWA8800’s applications include network security, data...
Read More »
Sterlitech Presents HFFO06 Osmosis Module With an Active Area of 0.6 Square Meters
The HFFO06 Hollow Fiber Forward Osmosis Module is used as an intermediate step between bench-scale flat sheet membranes and larger hollow fiber modules. The unit uses osmotic pressure that eliminates need for pre-treatment and high hydraulic pressures in pressure-driven treatment processes. It is suitable for use in food and beverage, and treating hard and high salinity water. The fiber module...
Read More »
Sterlitech Presents HFFO06 Osmosis Module With an Active Area of 0.6 Square Meters
The HFFO06 Hollow Fiber Forward Osmosis Module is used as an intermediate step between bench-scale flat sheet membranes and larger hollow fiber modules. The unit uses osmotic pressure that eliminates need for pre-treatment and high hydraulic pressures in pressure-driven treatment processes. It is suitable for use in food and beverage, and treating hard and high salinity water. The fiber module...
Read More »
New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...
Read More »
New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...
Read More »
New NVP2000x XMC Graphics/GPGPU Cards Come with H.265/H.264 Hardware Encode/Decode Capability
The NVP2000x XMC Graphics/GPGPU Cards are based on NVIDIA® Quadro® P2000 graphics and are designed for use in harsh environments. The units feature rear XMC I/O connector Pn6 that offer customizable DisplayPort++ video outputs. They can be customized to support DVI, SDI, Composite, STANAG 3350, RS-170, RS-343, and VGA outputs. The cards can be configured to power ratings in 25 to 50 W range and...
Read More »
New NVP2000x XMC Graphics/GPGPU Cards Come with H.265/H.264 Hardware Encode/Decode Capability
The NVP2000x XMC Graphics/GPGPU Cards are based on NVIDIA® Quadro® P2000 graphics and are designed for use in harsh environments. The units feature rear XMC I/O connector Pn6 that offer customizable DisplayPort++ video outputs. They can be customized to support DVI, SDI, Composite, STANAG 3350, RS-170, RS-343, and VGA outputs. The cards can be configured to power ratings in 25 to 50 W range and...
Read More »
New CRE-605 Workstation Can Be Configured as Stand-Up or Sit-Down Station
The CRE-605 Workstation is designed for automotive part suppliers and built with 28 mm pipes and joints. The unit features flow lanes for first-in, first out parts handling in an assembly operation. It is offered in 60 x 80 x 64 in. (W x D x H) dimensions and has a load capacity of 600 lbs. The workstation features a plastic work surface that covers entire front of the station and the above work...
Read More »
New CRE-605 Workstation Can Be Configured as Stand-Up or Sit-Down Station
The CRE-605 Workstation is designed for automotive part suppliers and built with 28 mm pipes and joints. The unit features flow lanes for first-in, first out parts handling in an assembly operation. It is offered in 60 x 80 x 64 in. (W x D x H) dimensions and has a load capacity of 600 lbs. The workstation features a plastic work surface that covers entire front of the station and the above work...
Read More »
Latest EtherCAT Absolute Encoders Deliver Resolutions Up to 43 Bits
The EtherCAT Absolute Encoders are available in Model A58HE and Model A58SE models and are designed for use in harsh factory and plant environments. The units are offered in 58 mm diameter housing and offer bore sizes up to 15 mm and shaft diameters up to 10 mm. The encoders can be operated in -40°C to 85°C temperature range and are rated to IP65 sealing. They provide CoE, FoE, EoE Ethercat...
Read More »