Aprima Medical Software, Inc

Materials

Steel Turning Grades increase tool life.

KC9110 and KC9125 have coating bonding technology that can apply 3 main layers and several sub-layers of coating with total thickness of 18 microns. Grade KC9110 is ISO class P10 grade for finishing operations while Grade KC9125 is P25 class grade for universal machining on all types of steel. Both have coatings 25 to 75% thicker than company's conventional coated carbides and increase...

Read More »
Tool speeds stripping of cable jackets.
Agricultural & Farming Products

Tool speeds stripping of cable jackets.

Roto-Spin strips round communication cables including fiber-optic, Category 5 and datacomm. It features swiveling blade to ring and straight-cut cable jackets from 0.16 to 0.60 in. dia. Rotating cam has 16 settings from 0.010 to 0.120 in. to set blade penetration. Adjustable stop with scales in inches and millimeters allows cables to be stripped to same length every time. Clamping vee with 2...

Read More »
CAD/CAM Software offers unified filleting with 1 command.

CAD/CAM Software offers unified filleting with 1 command.

VX Overdrive(TM) Version 5.5 provides intelligent hints about designing models. Its VX Hints mode offers situation-specific, or environment-sensitive, questions and advice as models are created. Icons and toolbars on the interface stay hidden until they are needed to reduce screen clutter. Features include manual and automatic healing of imported solid models and interoperability through direct...

Read More »
Blowers, Fans and Thermostat come in different models.
HVAC

Blowers, Fans and Thermostat come in different models.

3-phase 200 to 230 Vac blower models MB810-T and MB1225-T have impeller diameters of 3.15 and 4.72 in., respectively. MB810-T produces maximum airflow of 56.5 cfm at 2800 rpm to 63.6 cfm at 3350 rpm, while MB1225-T produces 155 cfm at 2850 rpm to 184 cfm at 3300 rpm. MBD Series DC centrifugal blowers include blowers with both 3.15 and 3.94 in. impeller diameters. Airflows range from 51.2 cfm at...

Read More »
Extruder reprocesses low bulk density foam.
Machinery & Machining Tools

Extruder reprocesses low bulk density foam.

Scrapper(TM) dual-diameter extruder features large diameter screw section equipped with deep flights to mix and break down materials, while small diameter section is dedicated to melting, pumping and removing excess gases and volatiles. Feed section is cored for water-cooling and contains knives to assist in feeding of roll stock. Steel, fixed weldment base allows for mounting of smaller diameter...

Read More »
Fluoroelastomers feature reduced post-cure time.
Materials

Fluoroelastomers feature reduced post-cure time.

Tecnoflon HS Family Fluoroelastomer products allow fabricators to reduce in-plant energy consumption, speed throughput of end products, and reduce need for inventory of their products. When injection- or compression-molded into O-rings, seals and other precision components, HS fluoroelastomers exhibit reduced mold fouling. They meet industry specifications, including MIL-R-83248C.

Read More »
Blue Laser has power control option.
Electronic Components & Devices

Blue Laser has power control option.

APC automatic power control lets company's diode-pumped solid-state (DPSS) laser systems be switched between ACC(automatic current control) and APC via RS232. In APC mode, system will maintain precise level of output over long periods of time. This is suitable for measurement and scanning applications where long-term stability and repeatability is critical. It also increases system life by...

Read More »
UV Optics and Coatings are for use in 120 to 370 Nm range.
Optics & Photonics

UV Optics and Coatings are for use in 120 to 370 Nm range.

Lenses, mirrors, prisms and beam splitters are made from UV-grade synthetic fused silica with ultrafine laser polish and 10-5 scratch dig specification. Thin-film optical coating is designed for performance in ultraviolet at 193 Nm, 248 Nm or 355 Nm. Applications include materials processing such as production of integrated circuits; hole drilling, microstructuring and marking; surface treatment...

Read More »
Profiler utilizes Windows-based operating software.
Controls & Controllers

Profiler utilizes Windows-based operating software.

WinCamD 3-dimensional beam intensity profiler features 4.65 Â-µm square pixel size and 14-bit analog-to-digital converter that gives it greater than 16,000 levels of intensity resolution. WinCamD includes pass/fail settings for beam width, relative power, Gaussian and top hat fit, and data logging. It can be used for pulsed (as low as 1 Hz) or continuous-wave beams. Use of variable electronic...

Read More »

All Topics