Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Gas Detection System deploys as component or as network.
MeshGuard system, suitable for gas detection in stationary applications, is designed for use in hazardous industrial locations. Wireless system is available as system component or as preconfigured Rapid Deployment Kit. Kit includes FMC 2000 wireless controller, which supports up to 24 sensors and includes wireless modem that communicates with each. It also integrates routers, battery-powered...
Read More »Screw Driving Robot delivers and installs range of fasteners.
Incorporating Selectively Compliant Assembly Robot Arm (SCARA), Viper MBC delivers and installs fasteners such as screws, nuts, bolts, pins, clips, brass rings, and barbed darts. System includes Visumatic Model 94 feeder, which automatically delivers each screw directly to tooling tip. Tooling is physically located at end of second SCARA joint, so joints 3 and 4 are spared tightening forces and...
Read More »
Triplex Plunger Pumps offer corrosion resistance.
Featuring 316 SS liquid-end for corrosion resistance, Models 7CP6111 and 7CP6171 are suited for pumping liquids such as sea water in small SWRO installations, DI water for misting, or hot water for sterile cleaning systems. Available in either belt-drive or direct-drive models, pumps deliver 10.5 gpm up to 2,000 psi. Units include dipstick for oil level check and STG V-packings to maximize seal...
Read More »Load Switches provide protection and power conditioning.
Supplied in 1 x 1-4 mm WL-CSP, IntelliMAX(TM) FPF110x series integrates analog switch control functionality and offers 35 mW RON typ. It allows direct load switch interconnection into most MPUs for software-transparent operations. Based on power CMOS silicon, series eliminates need for additional input capacitors and offers protection through integrated slew rate control. Slew rate options of 65...
Read More »
Belt Tension Meter helps optimize transmission performance.
With Trummeter Pro, users can measure belt tension of pulley-driven transmissions and adjust it accordingly. Device displays tension reading and also indicates if tension is too high or too low. When user induces slight vibration on drive belt, meter will detect vibration and estimate natural frequency of belt assembly. Together with belt mass and length of free belt strand, true force is...
Read More »Rechargeable Lanterns use C4® LED technology.
To produce uniform flood pattern, E-Flood-® LiteBox® and E-Flood® FireBox® each use 6 LEDs and wide pattern parabolic reflectors. On high setting, units provide 4,000 candela peak beam intensity and 615 lumens measured system output over distance of more than 400 ft, and on low setting, they provide 2,150 candela peak beam intensity and 330 lumens output. Both types come in standard and...
Read More »
Pliers and Cutters feature task-specific designs.
Available in 34 models, Accu-Cut Cutters are offered with blades with alloy steel, stainless steel, or alloy steel with tungsten alloy edges, in semi-flush, flush, or razor flush blade edge varieties. Produced in 5 styles, Accu-Cut Pliers include chain nose with long or short jaw, needle nose, round nose, and flat nose models. All tools have dual leaf springs for smooth, consistent operation and...
Read More »
High-Temperature Proximity Sensors detect metal targets.
Sensor Detects Presence of Metal Objects in Process and OEM Applications Southington, Conn. -- For sensing applications exposed to temperatures from -25 degrees C to +180 degrees C, Baumer has introduced the new IFRH Series of Inductive High Temperature Sensors, a family of two-part proximity switches available in M8, M12 and M18 designs with chromium nickel steel housings. Intended for...
Read More »Rechargeable Lanterns use C4-® LED technology.
To produce uniform flood pattern, E-FloodÃ-® LiteBoxî and E-Floodî FireBoxî each use 6 LEDs and wide pattern parabolic reflectors. On high setting, units provide 4,000 candela peak beam intensity and 615 lumens measured system output over distance of more than 400 ft, and on low setting, they provide 2,150 candela peak beam intensity and 330 lumens output. Both types come...
Read More »
Pliers and Cutters feature task-specific designs.
Available in 34 models, Accu-Cut Cutters are offered with blades with alloy steel, stainless steel, or alloy steel with tungsten alloy edges, in semi-flush, flush, or razor flush blade edge varieties. Produced in 5 styles, Accu-Cut Pliers include chain nose with long or short jaw, needle nose, round nose, and flat nose models. All tools have dual leaf springs for smooth, consistent operation and...
Read More »