Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Vertical Machining Center offers high intensity lighting.
Arrow Series 2 VMC-1250C features Ultimate Performance(TM) and Profibus I/O interface technology. Its digital vector spindle drive provides 30 Hp Max, 25 Hp MTDR. Spindle acceleration allows 40 series spindle to reach 8,000 rpm in 1.8 seconds, and drive system provides constant torque regardless of load. Process matching feedrates of 590 ipm are combined with rapid traverse rates up to 1,416 ipm....
Read More »
Lubrication System minimizes oil use and maintenance.
Model 780S-SS stainless steel spray system lubricates cutoff blades. It utilizes Low Volume Low Pressure air to apply food-grade lubricants on cutting edges without waste, mess, or overspray. Lubricant can be applied either continuously or at user-defined intervals. Spray valve can be mounted in stationary or movable fixtures.
Read More »
Serial Card puts three RS232 ports in single slot.
CYB 3232 cards put three RS232 ports on one PCI or ISA card. Each has three 9-pin male DB connectors, 16-byte FIFO buffers on each port, maximum data rates of 115,200 baud, and operating temperatures from 32 to 158 Ã-ºF. PCI card is fully Plug-and-Play, while ISA slots require card configuration. Both cards come with applications programs and drivers on CD. Supported operating systems include...
Read More »
Reversed PC Chassis makes cabling easier.
Backwards RBC PC chassis puts expansion-card connectors, switch, drive bays and USB port in front for easy access. All-steel heavy duty rack-mount chassis is 19 in. wide at flanges, 4 rack units (7 in.) high, and 17.9 in. deep. It is available in 14-slot passive backplane or ATX motherboard versions. Applications include test lab and industrial control tasks that require convenient front access...
Read More »
Labeling Tool offers 5 font sizes and 3 label widths.
Hand-held ID PAL(TM) thermal transfer labeling tool comes with electrical and datacomm symbols, and prints upper and lower case characters. Built-in intelligence automatically senses tape width and formats label. Unit includes multiple line printing, automatic centering, top-loaded cartridge, built-in cutter, and automatic power off. ID PAL can be used for marking smooth/flat, curved, textured,...
Read More »
RS-422/485 Card operates at speeds to 18 Megabaud.
CYB 218MP dual-port PCI RS- 422/485 card can be set for communication rates from 115,000 to 18,000,000 baud. Two ports on each card can be set independently for either full or half-duplex RS-485 operation. Card does not rely on host PC to track transmissions; on-board circuits track beginning and end of all incoming and outgoing messages. Handshaking circuit synchronizes card with each...
Read More »
Data Acquisiton Board provides 32 channels of 16-bit data.
PCIDAQ 3220 data-acquisition board provides 32 single-ended or 16 differential analog input channels, resolution better than 1 part in 65,000, and data rates up to 110,000 samples per sec. It has 32 digital I/0 lines that are protected by 5,000 Vrms of isolation and noise-rejection ratio of 115 dB. Inputs accept voltages up to 24 Vdc, and output lines can sink up to 500 mA per channel. Board has...
Read More »Test Solutions accelerate wireless IC development.
VG3000E/VG6000 Synthesized Vector Signal Generator and VN6000 Wide-band IQ Demodulator form complete IEEE 802.11a test solution for wireless LAN development. Units feature RF bandwidth up to 120MHz (-3dB). Frequency ranges are 4.96GHz to 6.2GHz/250kHz to 3.2GHz for VG6000, 250kHz to 3.2GHz for VG3000E, and 4.96GHz to 6.2GHz/220MHz to 3.2GHz for Demodulator.
Read More »
Strain Gauge Module makes multiple measurements.
Model FP-SG-140 interfaces to transducers such as load cells and pressure sensors, as well as standard full, half, and quarter bridge strain gauges. It has 16-bit resolution, software configuration utility with pull-down menus, and 8 analog input channels with software-enabled comb filter. Users can set comb filter to reject frequencies above 15, 60, or 240 Hz. Applications include machine and...
Read More »
LED Darkfield Ringlights suit industrial OEM applications.
Intelligent LED Darkfield Ringlights detect intensity and temperature fluctuations for continuous feedback and failsafe system operation. Features include matrix plate heat sink and matrix circuit design for isolating failures to individual LEDs. Line includes 3-ring LED ringlight, darkfield ringlight, and diffuse dome ringlight. Ringlights are driven by controllers that offer dimming, remote...
Read More »