Aprima Medical Software, Inc

Modular Test System includes library of test standards.
Test & Measurement

Modular Test System includes library of test standards.

NSG 5200 test system meets electromagnetic compliance (EMC) immunity test standards for supply voltage variations (SW), conducted sine waves (CSW), and power magnetics (PM). These tests are applied to radios, antenna drives, and other electronic systems including those with 42 V supplies. Modular in design, NSG 5200 can function as stand-alone unit, or it can be combined with NSG 5000...

Read More »
Panel-Mount Isolation Valves measure 42.7 x 25 mm.
Fluid & Gas Flow Equipment

Panel-Mount Isolation Valves measure 42.7 x 25 mm.

Two or three-way STV-K-1 Molded PEEK Solenoid Operated Isolation Valves feature abrasion-resistant valve seats, 20 mm diameter solenoid coils, and PTFE isolation diaphragms. Perfluor elastomer valve seats provide chemical resistance. STV-K-1 valves are tolerant to particulate in flow streams. Rated for continuous duty, valves operate on 12 or 24 Vdc power, and are available with 1.8 mm orifice...

Read More »
Wall-Mount Cabinets have universal hinging design.
Laboratory and Research Supplies and Equipment

Wall-Mount Cabinets have universal hinging design.

Space Saver 19 in. rack-mount Wall-Mount Cabinets are designed for organizing system and network components. Offered in 14 gauge steel, cabinets are available in 3 heights and 2 depths with vented or solid side styles, plexiglass or solid doors, 3 in. dia top and bottom cable access ports, and front and rear key locks. Two 19 in. mounting rails are furnished with EIA-310 hole pattern: 10 to 32...

Read More »
Packaging Products & Equipment

Stapler operates at 12.7 staples per second.

Pneumatically operated N5008AC Standard Crown Stapler features cylinder valve firing mechanism and aluminum magazine. Nail-driving depth can be adjusted for counter-sinking or flush-driving. Handle is equipped with durable rubber grip for comfortable use. N5008AC uses 16 gauge, 7/16 in. crown staples that are 1 to 2 in. in length, and features maximum staple capacity of 160. Operating pressure is...

Read More »
Construction Equipment and Supplies

Framing Nailer handles lengths from 2-3/8 to 3-1/2 in.

Model NR90AC2 Full Head Framing Nailer has 1-piece solid extruded aluminum magazine, die-cast aluminum body, and air inlet dust filter. It operates at pressures of 70 to 100 psi, and is capable of driving up to 3 round head nails per second. Features include aggressive nail push lever, idling protector, depth-of-drive adjustment dial, and 360° exhaust. It can handle 50 to 60 nails (2...

Read More »
3-Port Ethernet Module drives network applications.
Controls & Controllers

3-Port Ethernet Module drives network applications.

Triple-port Ethernet module model Em104P-LAN100NT incorporates 3 Intel 82559 Ethernet controllers for flexible Ethernet networking capabilities at 10- or 100-Mbps data rates. It includes built-in 10-pin box header and RJ-45 connectors. Three definable diagnostic LEDs indicate operating status of network and module. Both 32-bit PCI-based PC/104-Plus and 16/8-bit ISA-based PC/104 interfaces are...

Read More »
Embedded Miniboard is based on Intel 82443 BX chipset.
Computer Hardware & Peripherals

Embedded Miniboard is based on Intel 82443 BX chipset.

EmCORE-i6352 embedded low power Pentium® III EBX Miniboard features PC-100 core logic and onboard 128MB SDRAM. Its onboard Intel 82443 BX chipset with PIIX4E can support CPU speeds up to 500 MHz, while C&T 69000 controller facilitates Flat Panel displays with 2MB on-die SDRAM. Watchdog Timer function prevents system applications from losing control, while 16-bit GPIO interface accelerates...

Read More »
Coordinate Measuring Machine is available with probing options.
Test & Measurement

Coordinate Measuring Machine is available with probing options.

Strato CMM features digital servo technology that delivers 16.93 in./sec traverse speed and 0.17G acceleration. Four models are available with measuring ranges from 28x28x24 in. to 36x64x24 in. Quick Vision Probe provides non-contact measurement and offers magnifications of 1X, 3X, 5X and 10X. Repeatability is ±.00004 in. Both touch and vision modes may be integrated into single CNC...

Read More »
Chucks have through-coolant capability.
Machinery & Machining Tools

Chucks have through-coolant capability.

Featuring thick wall design, Power Milling Chucks resist deflection even under heavy side loading. Concentricity is within .0002 in. T.I.R. at the nose. Seals are used to resist contamination of internal components. Chucks are available in BT 40 and CAT 40 and 50 shank sizes in 3/4 in. and 1 1/4 in. chuck capacities. Accessories include 2 straight slotted bushing/collet designs to handle shank...

Read More »
Refrigerated Air Dryer has small footprint.
Fluid & Gas Flow Equipment

Refrigerated Air Dryer has small footprint.

RHT Series dedicated high inlet temperature (up to 180°F) refrigerated air dryer features integrated separator/filter. Its design provides filtration of solid particulates to 3 microns, oil aerosols to 5 ppm, and gives 50°F pressure dew point for dry air. Using up to 30 HP reciprocating compressors, dryer is suitable for confined installations and light industrial facilities.

Read More »

All Topics