Aprima Medical Software, Inc
Carrollton, TX 75006
Soil Sampler grabs samples and catches cores.
Piston Sampler collects discrete interval samples in difficult conditions, such as flowing/heaving sands and swelling clays using any direct push system. System also works in soils below groundwater, and prevents liner failure during sample collection. Using either or both of 2 core catcher options can minimize chance of losing soil sample.Read More »
Parts Cleaning System takes parts through on conveyor belt.
PWD Series parts washer/dryer system has single conveyor belt that links washing and drying components with optional rinsing, rust-inhibiting, moisture blow-off and liquid filtration equipment. Standard unit is 12.5 ft long and 45 in. wide, with 180 gal cleaning solution tank and V-jet spray nozzles on top, bottom and sides of wash chamber. Modular systems can be built with varying belt widths,...Read More »
PCB Connectors suit GPS applications.
RTI-8300-04 right angle, MCX, female, surface mount PCB connector is suitable for 50 ohm applications with frequencies up to 6 Ghz. Snap-on mating provides rapid connects and disconnects. RMX-8300-04 offers gold plated machined brass body, gold plated contact, and Teflon-® insulation. Suitable for space and weight-limited design criteria, MCX connectors are 30% smaller than SMB connectors, and...Read More »
Wire Wound Chip Inductors have dim. tolerance of
LQ-LBH Series chip inductors reduce EMI, and enable mounting density with pitch of 0.3mm, Q-Values of 12-46, and non-directional surface-mountability. LQ-LBH devices provide 100% silver wire wound (Ag) internal conductors and advanced ceramics. Inductance range is from 2.7 to 100 nH, maximum current is rated from 200mA to 1A, and DC resistance values range from 0.03 to 1.0 Ohms.Read More »
Solids Reduction Unit retrofits to twin shaft grinders.
Annihilator twin shaft solids reduction unit is supplied with seals and bearings housed in replaceable stainless steel cartridge, which allows on-site replacement. Counter-rotating, hexagonal shaft design coupled with hardened steel cutters provide maximum shredding strength necessary to process 300 to 4,250 GPM of influent. Annihilator is fitted with toothed cutting spacers, electronic control...Read More »
Dust Collector occupies 10 sq ft of shop space.
Model 2.3x3S/D multi-function smoke and dust collector collects smoke from welding operation, converts to downdraft bench for finishing operations, and can be fitted with duct wye and blast gate to collect dust from metalworking operations. Its 3 hp blower moves 1,500 CFM of air. Collector also offers high-efficiency permanent fabric filter and removable dust pan. Options include activated carbon...Read More »
Flooded Battery provides backup power.
LCT II-1700 standby battery has floating epoxy post seal and solid copper posts to improve short duration rates of less than 5 hr. Applications include central office, Internet backup, data centers, outside plant, and wireless.Read More »
Failsafe Brake fits stepper and servo motors.
Model RFEB power-off brake mounts on front end of standard NEMA 23 and NEMA 34 stepper or servo motors to prevent machine from operating or for holding load in place when power fails. It has spring-set design, ball bearing supported output shaft, and operates at speeds to 8,000 rpm. Brake is available in 24 and 90 Vdc versions. Applications include factory automation, material handling, robotics,...Read More »
Hose Storage Stations eliminate clutter, promote safety.
Sanitary HSU Series stainless steel hose racks are passivated and electropolished, conform to FDA and 3A regulations, permit full drainage, and enhance safety by keeping all hoses, clamps, gaskets, and adapters neatly stored in 1 location. Wall mounted stations are available in 2 styles: HSU-100 is 18 x 6 in. semi-circle for draping several long hoses and HSU-11 through HSU-32 hold sanitary clamp...Read More »
Y-Strainer includes quick clean cap.
Polypropylene 3 in. Y-strainer has 4 in. cap that incorporates cam-arm safety latches. Strainer has extra large stainless steel screen, EPDM gaskets and Viton O-rings. Pressure rating is 75 psi max at 70-Read More »