Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
CompactPCI Slot Controller provides multiple interfaces.
Model PP 100/01x CompactPCI system slot controller offers 1.2GHz Pentium III Processor-M CPU, support for Packet Switching Backplane, hot swap capability, and system monitoring. It operates in Slot Controller and Satellite Mode. Processor operates at 1.2GHz, and supports 133MHz bus and 512 Kbytes of high-speed secondary cache. Heat sinks are used for CPU cooling. 2 Gigabit Ethernet channels...
Read More »
Gaging Probe gets out of the way when necessary.
Shaft of GHX Series LVDT probe retracts during loading/unloading operations in gaging fixture or inspection jig, but extends immediately when pressurized by air. Probe contact force remains constant, independent of position, and can be set by adjusting air pressure. Air outflow through bearing stops grit, dirt, dust, oil, solvents or other contaminants from entering unit. Applications include...
Read More »
CompactPCI Platform has packet switch fabric backplane.
FABRICPAC Series configurable Fabric-ready platform contains 2.16 packet switch compliant backplane with cPCI, H.110, and IPMB buses. It has 1 GHz Intel Pentium III CompactPCI single board computer, layer 2 or 3 switch card, floppy disk drive, CD drive, 10 or 30 GB EIDE hard drive, and choice of memory ranging from 128 to 768 MB SDRAM. System supports Linux, Solaris, Windows 2000, Windows NT WS,...
Read More »
CompactPCI Chassis offers portability.
Fabric 585 Series, with 2.16 packet switch Fabric-compliant backplane, is suitable for development of datacom/telecom, industrial automation, and mobile test environments. It has 8 vertical slots in 9U aluminum enclosure with flush card cage. Double-wide Slot 8 is reserved as CPU slot, while Slot 7 is reserved as Fabric slot. Chassis accepts Pentium(R), Celeron(TM), and Pentium II/III...
Read More »
Size Reduction System does not generate fines.
Nibbler uses cutting or grating action to produce consistent particle size with virtually no heat or dust. It has low speed (
Read More »
Short Wavelength Laser manages micromachining applications.
Q-switched AVIA 266-1500 diode-pumped, all-solid-state, 266 nm UV laser has average power of 1.5W at 20 kHz, making it suitable for micromachining sensitive materials such as glass, silicon and microelectronic materials, and thin-film removal. It can produce spot sizes as small as 5 microns and perform micromachining without producing collateral thermal damage. Device is pumped by 2...
Read More »
Hose Clamps are offered in various styles.
Standard hose clamps have stainless steel band and are suited to multi-purpose applications. Stainless steel clamps are suitable for corrosive environments. Shielded clamps are designed for soft hose materials. Inner stainless steel band prevents material from protruding through slots of outer band. Fuel Injection clamps have non-perforated band and zinc-plated carbon screw and nut. Locking hose...
Read More »
Inkjet Printer codes directly on corrugated surfaces.
Redesigned Little David(R) MicroJet has narrower nose for easier access in tight mounting conditions. It prints to within 1/2 in. of case bottom, prints 1 to 3 lines 3/8 in. to 2-7/32 in. high, and has automatic speed and direction sensing. Self-contained unit has rugged steel housing, non-pressurized ink container, and 2 year warranty on valves.
Read More »
Cooling System suits dry grinding applications.
Kool-Grind System includes chiller with 4x4 in. plate and 6x12 in. electromagnetic chuck. Chiller runs coolant through plate and chuck to cool work-piece during grinding, prevent heat build-up and warping, reduce grinding wheel breakdown, and allow closer tolerances. It avoids use of flood coolants or mist sprays. Applications include thin parts, mold inserts and die sections.
Read More »
Portable Plotter prints on electrical components.
VS200 allows end user to identify virtually all electrical/electronic components, including terminal blocks, wires and cables, bundles of cables, PLCs, contacts, pushbuttons, and flat surfaces. End user can input information manually into plotter or download it from computer. It plugs into electrical outlets and can be used with portable battery pack.
Read More »