Aprima Medical Software, Inc

Tiny Relay switches up to 20 A.
Electrical Equipment & Systems

Tiny Relay switches up to 20 A.

Subminiature AZ9471 PCB power relay has footprint of only 0.295 sq in., yet it can switch 20 A motor, carry up to 35 A for 2 min, and withstand inrush of 40 A. With silver tin oxide contacts, it can withstand inrush of 60 A. Coil voltages range from 6 to 24 V, and power consumption is 0.6 W. Relay is epoxy sealed for automatic wave soldering.

Read More »
Cable Stripper handles heavy Romex wiring.

Cable Stripper handles heavy Romex wiring.

Dual NM cuts and strips non-metallic 12/2 and 14/2 Romex with ground. Large stripping jaws remove outer sheathing without damaging inner wires, while single conductor stripping station removes insulation from inner wires without damaging conductors. Tool allows removal of wire-insulating jacket with just one cut. Curved cutting blade and pliers nose helps cut, grip, pull or twist wires. Cushion...

Read More »
HVAC

Cartridge Heater warms up small parts.

Small and Mighty 1/8 in. dia cartridge heater can be used to heat small parts, torpedo systems and manifolds. High watt density heater uses 24 to 240 Vac supply voltage, avoiding use of transformers. It has MgO core in 321 stainless steel sheath with hermetically sealed welded end. Options include swaged-in or crimped lead wires in Teflon® or fiberglass insulation.

Read More »
Electrical Equipment & Systems

Pressure Transmitter features 3-valve manifold.

Series 645 Wet/Wet Differential Pressure Transmitter is designed for use with compatible gases and liquids. Three-valve manifold assembly elminates fluctuations in readings by allowing user to purge system. Unit features NEMA 4X housing and 2 bleed ports to permit total removal of air in line and pressure cavities. It offers accuracy of ±0.25% of full scale, response time of 30 to 50 msec,...

Read More »
Agricultural & Farming Products

Hammer Drill has drill chuck capacity of 1/2 in.

Model FDV16VB Hammer Drill's low noise cooling air-flow design ensures protection against overheating. It contains ball and needle bearings, and is double insulated. FDV16VB's 5 AMP power-plus motor delivers no-load speeds of 0-2900 RPM with 550 W input. Other features include pistol type handle, keyless chuck, pressure sensitive trigger, and variable speed preset dial. Impact drill or drill only...

Read More »

System provides repeatable thread detection.

KD-2440 Thread Detection System detects UNC, UNF, ISO coarse and ISO fine threads via inductive technology that measures without touching object. System features adjustable gain analog output, adjustable switched output, 10 KHz frequency response, and 12-24 vdc input. KD-2440 is available with choice of 4 sensors in sizes from 0.08 in. to 0.45 in. dia. All sensors are unaffected by environmental...

Read More »
Paints & Coatings

Rust Inhibiting System protects metal on vehicles.

RustBustR(tm) Rust Inhibiting System utilizes cathodic protection to protect metals from premature oxidation. Its 2 x 3 in. brick combines zinc alloy with strong magnet, and is attached inside frames/panels of vehicles by electrically conductive adhesive. No outside electrical source or training is needed for installation. RustBustR stores electrons, and supplies them to other metals in vehicles.

Read More »
Solenoid Valve is suitable for hazardous locations.
Fluid & Gas Flow Equipment

Solenoid Valve is suitable for hazardous locations.

Normally closed, 3-way solenoid valve is explosion-proof and UL listed. Body is made from brass, and seals and seat are Buna N. Soft-seated poppet design provides bubble-tight sealing in air applications. Valve can operate safely in temperatures from 0 to 104° F ambient, with maximum TC3 valve temperature rating of 160°C. Maximum operating pressure is 150 psi. Valve is available in...

Read More »
Self-Propelled Boom Lift is trailer mounted.
Material Handling & Storage

Self-Propelled Boom Lift is trailer mounted.

DINO 125T boom lift, with 24V battery-powered system, operates any place where overhead access is needed. It features 41 ft working height, 24 ft 7 in. outreach, and 474 lb platform capacity. Included hydraulic drive system enables lift to traverse job sites at up to 25% gradeability. Additional features include on-board charger, 2-speed boom motion control, and 360° continuous boom...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers