Aprima Medical Software, Inc
Carrollton, TX 75006
Connector eliminates bent pins.
Power-Edge(TM) PEC Series has edge card interface with 3, 7 or 10 contacts. One-piece interface is rated up to 5 A and has contacts on .100 in. pitch. Built-in card latches increase withdrawal force required for removing power board. Optional alignment pins and locking clips can be provided.Read More »
Welding Generator is driven by diesel engine.
Trailblazer(R) 301 D boasts 300 A output and 10,000 W peak auxiliary power rating at 104 deg F. Multi-process, CC/CV machine provides 20 to 300 A dc output for Stick, TIG, MIG and Flux Cored welding. It also provides 35 to 225 A of ac current at 60% duty cycle for TIG welding. Generator is powered by 18.8 hp Kubota diesel engine that idles immediately when started. Welding arc is not affected...Read More »
Screw Feeders have USDA approved seal.
Model DB1 Volumetric Screw Feeders feature rear seal made of Teflon(R) braids and bronze pusher, allowing use in sanitary applications. They utilize only 5 moving parts to produce metering accuracy of +/- 1 to 1 1/2%. Units are constructed entirely of steel and offer compound screw arrangement that ensures all flights of metering screw are filled to maximum capacity with uniformly dense material.Read More »
Separation System suits septage, food, and pulp products.
SPIRALIFT(TM) SR receives, screens, and separates solids from liquids. It incorporates fine screening shaftless screw system, spray wash, optional press zone, and integrated controls. System is housed in stainless steel tank enclosure with quick disconnect inlet flange for connection to septage trucks. Automatic inlet valve regulates internal fluid level. SPIRALIFT SR is available with one, 2,...Read More »
Control Valves suit corrosive environments.
Hi-Cyclic(R) directional control valves are constructed of corrosion resistant solid brass with stainless steel spool. They are available in direct ported or manifold mount body styles with 8 spool configurations in sizes from 1/8 through 1/2 in. NPT or SAE ports. With operating pressure of 3000 psi, valves have max length of 2 1/4 in. and max body height of 2 5/8 in. Unit provides a low...Read More »
DC/DC Converters provide efficiencies above 90%.
V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...Read More »
Battery Maintenance System helps prevent dead batteries.
PowerPulse(R) electronic device uses battery's own energy to help prevent sulfation buildup and related problems, extending battery life and maintaining peak efficiency. Using ReNew-IT Pulse Technology, it collects small amount of energy from battery, reconditions it and returns it to battery as pulsating dc current. This current re-energizes and removes lead sulfate deposits from plates and then...Read More »
Cutters speed slotting, edging and shoulder milling.
CoroMill(R) 390 long edge, indexable milling cutters are available with 11 and 18 mm inserts for light to heavy machining of materials ranging from aluminum to hardened steels. Cutter bodies are machined from pre-hardened steels with high precision insert pockets for 90 deg edge positioning. The 11 mm insert cutter has 1.25 to 2 in. dia, with 1.42 to 3.9 in. length of cut. The 18 mm version has...Read More »
Scissor Lifts handle wide, bulky loads.
Double wide scissor lifts, available in 18 models, feature 2 sets of scissor legs under one platform for added strength. Platform sizes range from 14 in. wide x 36 in. long up to 96 in. wide x 96 in. long, with capacities from 4000 to 9600 lbs. Vertical travels are 24, 36, and 48 in. Lifts are equipped with built-in 2 HP motor, magnetic motor starter, 24 V control transformer, and safety fused...Read More »
Grab Hooks work with CM Herc-Alloy(R) 800 chains.
Cradleless Clevlok(R) Grab Hooks, forged in grade 80 alloy, are available in 9/32 to 5/8 in. sizes, and offer Clevlok style clevis. Hooks have working load limit of 3,500 to 18,000 lbs. CM grade 80 Herc-Alloy(R) 800 chain sling is black finish and/or color coded orange. Tag attached to sling permanently identifies grade, type, working load limit (at specific angle of lift), and registration...Read More »