Aprima Medical Software, Inc
Carrollton, TX 75006
Signal Conditioner converts sensor signals to 4 to 20mA.
DIN-rail mountable, Model 682A03 ICP(R) sensor signal conditioner converts analog voltage measurement signals of industrial vibration sensors. It provides choice of rms or peak acceleration, velocity, or displacement output signals as well as filtering ranges. Unit includes analog output BNC, LED indicators, and 500 Vdc isolation. Model 682A03 allows machine vibration to be continuously monitored...Read More »
Blowers provide continuous, quiet operation.
Omega Blowers are available in gear diameters from 2 1/2 to 8 in. with flows from 30 to 4,400 icfm at pressures to 15 psig and vacuums to 15 in. Hg. Omega-paK bare blowers feature automatic tensioning device and manifolded oil drains. Omega Plus tri-lobe models offer reduced pulsations. Applications include pneumatic conveying, aeration in waste water treatment, and environmental soil remediation.Read More »
Connector System separates liquids from electronics.
Sealed Mini Universal MATE-N-LOK(TM) wire-to-wire and wire-to-board connector system is splash-proof, and available as dual-row product in 2 to 10 positions. Connectors employ positive, polarized keys with latching orientations. Cycle durability is rated at 20 with contact retention of at least 8 lbs per contact. Housings are molded UL94V-0 nylon. Contacts are brass with pre-plated tin or duplex...Read More »
Heat Exchanger heats or cools corrosive fluids.
SSCF(R) shell-and-tube exchanger is available in 1-, 2-, or 4-pass models, with heat-transfer surfaces from 1.2 to 576 sq ft. It can be assembled from components and is available with ASME code construction. All fluid contact parts are stainless steel. For cooling chemical samples, carbon-steel or 316 stainless-steel EF(R), with all welded construction, has shell side pressures of 800 or 1000...Read More »
Ultrasonic Level Sensors include transmitter and software.
Non-contact BulkSonics sensors and stand-alone Smart Transmitters measure level of bulk solids and liquids. Windows(R) 98 PC-based EView software in each transmitter provides programmable parameters that allow user to program and monitor transmitters from PC in office or plant. Transmitters come with joystick aiming device and are available with optional split-flange for easy assembly and...Read More »
Fiber-Optic Multiplexer transmits 16 real-time video channels.
Digital, 8-bit VT/VR71630 transmits video signals that exceed RS-250C medium-haul performance specifications. It offers loss budget of 23 dB, 60 dB signal-to-noise ratio, and operating temperature range of -40 to 74 deg C. Unit can transmit distances up to 50 miles, making it suitable for use in CCTV surveillance applications as well as Video Detection Systems.Read More »
Rubber Treading suits commercial applications.
One-piece, nosing-tread-riser norament(R) is available with odorless, solvent-free, and fiber-reinforced stair tread adhesive system: nora(R) Stepfix, which allows stair tread to be walked on immediately after installation. Stair tread is available in raised round pastille and hammered surfaces in 25 solid, warm to cool colors, as well as earth tones.Read More »
Gas Springs offer corrosion resistance.
Supplied with black composite end fittings with nitride-coated retaining clips, NITRIDER(TM) gas springs have black nitride-coated shaft and black tube. Completely sealed springs have surpassed 200-hour salt spray test. They are available with 6, 8, and 10 mm rod diameters and 15, 18, and 22 mm tube diameters. Lengths vary from 5.5 in. compressed (7.5 in. extended) to 16.5 in. compressed (28.0...Read More »
Electric Chain Hoist moves 600 lb loads.
SLA Air Powered Hoists are available with lifting speeds up to 31 fpm. Variable flow pendant station allows for precise load spotting or continuous duty with less operator fatigue. Hoist has compact, aluminum frame with powder-coat finish. Double-reduction gear train is lifetime lubricated with non-oxidizing grease. All models have capacity limiter to protect hoist and operator from lifting...Read More »
Shaft Seals are available split or unsplit.
AH Series employs elastomeric drive design to protect shaft from abrasion damage and to accommodate 1/4 in. radial shaft runout. Seals are fitted with flush water inlet and drain ports for in-place cleanouts. They incorporate adjustment mechanism and monitoring provisions, allowing operator to perform preventive maintenance before leakage occurs. Seals are used on ribbon blenders, paddle mixers,...Read More »