Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Oxygen Probe offers universal compatibility.
Direct Replacement Oxymitter(TM) flue gas oxygen probe operates on most existing electronics and cable. It features explosion-proof housing, vibration resistance, field repairability, and 95% less power consumption than traditional electronics. When existing electronics require replacement, integral Oxymitter electronics that offer HART(R) or FOUNDATION(TM) fieldbus communications can be added.
Read More »Boards turn PC into measurement system.
PCI-DAS6025 and PCI-DAS6023 plug into PCI slot. Both offer 16 channels of 12-bit A/D measurements that may be taken at rates to 200,000 samples/second. Eight discrete digital bi-directional I/O lines control relays and solenoids, and monitor switch and contact closures. Each board supports 2 counters. PCI-DAS6025 has two 12-bit analog outputs and additional 24 digital I/O lines. Applications...
Read More »
Embedded Board has biscuit (EBX) form factor.
EBC-7850 3.5 in. disk-size embedded board supports Socket 370-based Pentium(R) III processor or Celeron(TM) 400 processor. Intel(R) 815E chipset provides up to 133/100 MHz front side bus speeds and 133 MHz for system memory. A 144-pin SO-DIMM socket allows up to 256 MB of SDRAM support. EBC-7850 has on-chip VGA controller with up to 1600 x 1200 resolution at 256 colors, 10/100 Mbps Ethernet, and...
Read More »PCI Mezzanine Card relieves bandwidth bottlenecks.
Single-wide PMC-Gigabit-ST2, with Intel 82544 PCI controller, has single Gigabit Ethernet interface controller port and allows CompactPCI systems to use PMC form factor for I/O expansion. Ethernet network interface complies with IEEE 802.3 specification for l0BaseT, l00BaseTX and 1000BaseT over category 5 twister-pair cable. Integrated MAC/PHY interface supports several features, including...
Read More »Gateway links multiple operating systems.
OSE Gateway integrates Windows, Solaris, Linux, and VxWorks operating systems into heterogeneous distributed communications system. It has library through which client application running on non-OSE operating system communicates with company's software. Library code interfaces with daemon running on external operating system. Daemon enables client process to behave as OSE process to OSE...
Read More »
Linear Motor offers high force-density operation.
Direct-drive, brushless, DC Model 4020-6 incorporates single integral moving shaft and measures 6.2 in. OD by 6.9 in. long. Alternating polarity neodymium-iron-boron magnets deliver force of 1125 lbf at peak, DC current of 30 A, and peak power of 5.2 kW. Built-in bearing system incorporates self-contained structure in stroke lengths of 2, 4, 6, 8, 10 and 12 in. Linear resolver, encoder, and...
Read More »
Optical Encoder provides 3 channel signal output.
Self-contained RS15 incremental encoder has 1.62 in diameter housing with body axial length of 1.25 in. Resolutions range from 16 lines up to 1250 lines per revolution, and maximum achievable slew speed is 6000 rpm. Unit supplied with 8-lead cable and integral strain relief for mounting. Face mount with 1.00 in. bolt circle and four 4-40 holes or C-Flange mounting adapter is available with...
Read More »
Touchscreen HMIs have NEMA 4/12 enclosures.
HMI900 Series of operator interfaces consist of: Model HMI985, with 12.1 in. TFT display with 1900 touchpoints and 800 x 600 pixel resolution; Model HMI975, with 10.4 in. TFT display, and analog micromatrix touchscreen with 1200 touchpoints and 640 x 480 pixels; and Model HMI960, with 8.9 in. EL display and analog micromatrix touchscreen with 1000 touchpoints and 640 x 400 pixels. Units come with...
Read More »
Reed Sensors mount on any fixed surface.
MK20 Series Cylindrical Reed Sensors are magnetically operated reed proximity switches available in 3 versions with 10-15, 15-20, and 20-25 AT magnetic sensitivity. Potted inside plastic case, sensors measure 0.118 in. OD by 0.335 in. long. They have 5W contact rating, 175 Vdc or Vac peak switching voltage, 0.25 A switching current, 0.5 A carry current, and 300 mohm static contact resistance....
Read More »
Horizontal Machining Center suits high volume production.
F3-660L offers spindle speeds from 0 to 20,000 rpm in 1.55 sec, 3.2G acceleration/deceleration rates, 90 deg table indexing at 0.8 sec, and chip-to-chip time of 2.4 sec. Rapid traverse rate for X, Y, and Z axis is 4720 ipm. Strokes for X and Y axes are 26 in.; Z axis stroke is 20 in. Tool magazine stores 40 tools with No. 40 taper. Tool life management software, 2-pallet changer, flood and base...
Read More »
