Aprima Medical Software, Inc

Turning Center features dual spindles.
Machinery & Machining Tools

Turning Center features dual spindles.

TL-25 lathe allows turning of double-ended parts in single setup on one machine. It has 30 hp vector-drive main spindle with 10 in. chuck, and 8 hp sub-spindle with 5 in. chuck. Main spindle provides speeds to 3,400 rpm, and sub-spindle provides speeds to 4,000 rpm. Standard 12-station tool turret holds 6 VDI 40 tools and 6 bolt-on tools. Live tooling and full C-axis are optional.

Read More »
Gantry Router doubles as milling machine.
Computer Hardware & Peripherals

Gantry Router doubles as milling machine.

GR-510 offers travels of 120 x 60 x 10 in. (X,Y,Z) and 40-taper milling head. It includes 10,000 rpm spindle with 15 hp vector drive system. Automatic 10-pocket tool changer is standard. Machine's 5 x 10 ft fixed table provides support for large or heavy workpieces. CNC accepts ISO standard G-code and is compatible with major CAM systems. Built-in graphic dry-run mode allows operator to check...

Read More »
Machining Center provides drilling, tapping, and milling.
Communication Systems & Equipment

Machining Center provides drilling, tapping, and milling.

Mill Drill Center offers 12 x 10 x 12 in. work cube and 15,000 rpm 40-taper spindle, powered by 15 hp vector drive system. Ballscrews and high-torque servo motors on all axes provide rapids to 2,400 ipm and accelerations to 0.8 G. Automatic tool changer stores up to 20 tools and changes them in 1.5 seconds. Dual fixture stations allow operators to load and unload parts on one fixture while...

Read More »
Laser Systems cut accurately.
Agricultural & Farming Products

Laser Systems cut accurately.

Z-1 and Z-2 Laser Cutting Systems combine rigidity and accuracy of VMC with Coherent Diamond-Series CO2 pulsed lasers. Z-1 has 100 W laser and 16 x 12 x 10 in. (XYZ) travel, making it suitable for etching, engraving and cutting small metallic and non-metallic parts. Z-2 has 500 W laser and travels of 40 x 20 x 25 in. Both are available with 4th and 5th axis, providing ability to tackle...

Read More »
Machining Centers work in five axes.
Communication Systems & Equipment

Machining Centers work in five axes.

VR Series 5-axis profiling vertical machining centers make complex shapes, undercuts, and difficult angles. Travels are 64 x 40 x 30 in. for VR-8, 64 x 40 x 30 in. for VR-9, and 120 x 40 x 30 in. for VR-11. Each has dual-axis spindle with fully enclosed gimbal to protect gears from chips and coolant. VR head provides +/-32 deg of travel on A and B axes for complex geometries and undercuts. All...

Read More »
Pressure Gauge includes integral transmitter.
Test & Measurement

Pressure Gauge includes integral transmitter.

Series 700 Plus Pressure Transmitter Gauge has 4 in. dial for local indication of pressure, plus process, current, or voltage signal for remote indication, control or data acquisition. It comes with 1/4 or 1/2 in. NPT connections and electrical cable. Wetted parts are 316 stainless steel and integral transmitter is ceramic. It is available in 22 pressure ranges from 30 in. Hg to 10,000 psi with...

Read More »
Stick/TIG Inverter provides simple operation.
Agricultural & Farming Products

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »
Power Cord is NEMA rated.
Electrical Equipment & Systems

Power Cord is NEMA rated.

UL-listed, CSA-certified Interpower(TM) NEMA 5-20P power cord is designed for equipment rated to 20A with service at 125 Vac. It utilizes 3 x 12 AWG, SJT cable and is stocked in 2.5 m length. Applications include power servers, disc drive systems, and industrial equipment. Custom lengths, terminations, and colors are available.

Read More »
Electrical Equipment & Systems

Fiber Pigtails cut manufacturing costs.

Fiber pigtails allow solder to be reflowed multiple times for optimal fiber alignment, without solder pull strength or metallization degradation. Assemblies improve performance of edge emitting devices by increasing light coupling efficiency with wedge fiber lens and AR coatings. By using components on single-mode and polarization maintaining fibers, users can improve performance of pump laser...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers