Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Centrifugal Blower provides quiet operation.
Combining non-overloading TEK backward-curved airfoil wheel with NEMA frame motors, precision-balanced TCD Blower meets AMCA B spark-resistant requirements. Noise levels range from 58-82 dBA. Enclosed in epoxy-coated, steel scroll housing, unit incorporates BCA impeller, manufactured of glass-reinforced polyamide. Additional features include flanged and drilled outlet, ABS inlet cone, CW rotation...
Read More »Microcontroller provides high-speed 8051 processing.
Offered with on-chip debug circuitry, C8051F120 microcontroller family features 100 MIPS (peak) 8051 CPU; 2-cycle, 16 x 16 Multiply-Accumulate unit; and 12-bit ADC and DACs. Suited for mixed-signal embedded control applications that require signal processing, series includes 128 Kbyte Flash memory, 8448 bytes RAM, and is packaged in 100- and 64-pin TQFP. On-chip peripherals include 2% internal...
Read More »
Safety Switch utilizes multi-magnet technology.
ISIS Safety Switch achieves 6 mm switching in tamper-resistant, resin-filled ABS or stainless steel body with IP67 protection rating. Available in range of voltages, ISIS control units monitor open and short circuit faults while providing 2 NO safety contacts and one NC auxiliary contact. Control units can monitor up to 2 or 4 safety switches, depending on model, and can monitor E-Stop buttons,...
Read More »
Electrical Connector links solar modules to DC/AC converters.
SOLARLOK interconnection system allows for assembly using hand tools or high speed, semi-automatic applicators. Flexible, UL and TUV approved system accommodates serial and parallel solar module connections. Silver-plated, copper alloy contacts, rated at 25 A, offer contact resistance of 1 milliohm or less. Connector housings are offered with positive and negative polarity keying. Weatherproof...
Read More »
Power Supply meets external power needs.
Model PW132 101 W switch mode power supply, featuring 100-240 Vac input power, provides regulated output with low ripple, and complies with EMI/RFI regulations. Typical electrical efficiencies are 85% and mean time before failure exceeds 100,000 hours. Applications include medical monitors/displays and respirators, point-of-sale terminals, wireless local area networks, and satellite receivers.
Read More »Gate Array suits high volume applications.
Field Programmable Gate Array, Cyclone(TM) Model EP1C4, offers up to 301 I/O pins and 4,000 logic elements. Built on 0.13 micron, all-layer copper process, unit includes embedded RAM blocks and is intended to facilitate use of FPGA technology by designers developing volume-driven applications in communications, industrial, consumer, computing, and automotive markets. It is specified for -40 to...
Read More »
Oil Skimmer offers variable collection rate.
Corrosion-proof MAXI-Skimmer(TM) Model SSV/5 is made of stainless steel, nylon, and UHMW bearing-grade polymer. With frame that measures 6 x 8 x 12 in., machine uses 1-4 in. wide polyurethane or stainless steel belt that can reach from 1-50 ft. down. Oil collection rate, from near 0 to 20 gph, is adjusted by rotating knob on control panel. Incoming 115 V power is converted to drive unit's 90 Vdc...
Read More »
I/O Servers offer scalable expansion.
Relio(TM) Series Solid State Embedded I/O Servers are available with 650 or 400 MHz ULV Mobile Celeron-® processors and offer standard I/O including dual 10/100Base-T Ethernet, four RS-232/422/485 multi-interface ports, and four USB ports. Units operate over wide temperature range with no moving parts. Interface to real world devices is available using PC/104 I/O family. Servers are 2U rackmount...
Read More »
Thermal Printer Mechanisms offer high-speed printing.
Series FTP-607MCL103/383 includes 2 and 3 in. die-cast metal printer mechanisms and optional automatic cutters. Both offer maximum variable print speed of 100 mm/sec and resolution of 8 dots/mm, and accommodate paper stock from 60-100 -µm thick. Easy-Load platen removal system expedites paper loading and printer maintenance. With head life of 500 million pulses or 50 km of paper, and operating...
Read More »Software allows users to track and manage documents.
Autodesk-® Vault provides workgroup management capabilities for Autodesk Inventor-® Series and Autodesk Inventor Professional software users. Management tool also allows teams of 1-10 users to immediately and securely track documents and changes, locate documents, manage libraries, and support concurrent engineering.
Read More »