Aprima Medical Software, Inc
Carrollton, TX 75006
Share:

IO-Warrior56 USB I/O Controller supports alphanumeric and graphic LCD modules.
Offering 8-channel 14-bit A/D converter and 16-bit PWM generator, IO-Warrior56 USB I/O Controller is available as 56-pin IC, PCB module or as starter kit. Delivering sample rate of 7800Hz when running in single channel mode, unit’s PWM generator uses an internal 1kHz, 250kHz, 2MHz, or 48MHz clock and generates output signal up to 12MHz. Designed with USB, I2C master, 50/100/400kH and SPI master...
Read More »
Heavy-Duty Wire Stripper comes with hot-riveted joint.
Used for stripping, cutting, and twisting 10-18 AWG solid and 12-20 AWG stranded wire, Heavy-Duty Wire Stripper features precision-grounded stripping holes and induction-hardened cutting knives. Having 6-32 and 8-32 bolt shearing holes, unit comes with Klein-Kurve™ comfort grip handles. Stripper can twist up to three wires at a time using knurled jaw.
Read More »
LIP 6000 Miniature Linear Encoder System weighs 5 grams.
Equipped with HEIDENHAIN signal processor 1.0 ASIC, LIP 6000 Miniature Linear Encoder System consist of scanning unit and glass scale which measure to 2 nm resolution with high speed of 4m/sec. Suitable for machine feedback, semiconductor manufacturing, metrology, and micromachining applications, unit comes with mounting tolerances, small interpolation error and low noise levels. Product measures...
Read More »
FoamRail Span⢠Mini Tapeless Seal can be used with positive or negative air.
Designed to construct dust barrier, FoamRail Span™ Mini Tapeless Seal is adjustable and can extend from 2 ft-3 in. to 4 ft to fit size of the job. Forming dust-tight seal in seconds, seal requires no ladder or tape. Suitable for small spaces in both residential and commercial job sites, product snaps on to ZipWall spring-loaded pole and is reusable.
Read More »ChromaLuxe Flooring Panels meet Carb 2 standards.
Available in 16.125 x 24.125 in. and 24.125 x 24.125 in. sizes, ChromaLuxe Flooring Panels consist of coated sheets of moisture-resistant high-density fiberboard. Suitable for hospitality areas, business offices, accents or insets as company logos, artwork, photography and graphics, ChromaLuxe Flooring Panels are rated for use in commercial applications.
Read More »
Michelman Fiber Sizing Used in Manufacturing of World's First Composite Overwrapped Pressure Vessel (COPV) made with Recycled Carbon Fiber
CINCINNATI, OH (June 27, 2017) - For the first time anywhere in the world, continuous recycled carbon fiber tow was used to manufacture a composite overwrapped pressure vessel (COPV). Steelhead Composites, Vartega and Michelman, all members of the Institute for Advanced Composites Manufacturing Innovation (IACMI), collaborated on the project. The achievement marks the first time that waste...
Read More »
Rapid Curing Two Component Epoxy Offers Impressive Chemical Resistance and High Bond Strength
Master Bond EP41S-F is a two part epoxy for bonding, sealing, coating and encapsulation applications. It combines fast ambient temperature cure speed with chemical resistance and superior electrical insulation properties. This versatile system is easy to handle and has a forgiving 100 to 25 mix ratio by weight. After mixing, EP41S-F polymerizes quickly and can usually be removed from a fixture...
Read More »
Clippard Miniature Pneumatic Pinch Valves
Cincinnati, Ohio – Clippard’s NPP Series 2-Way pneumatic pinch valves are air-piloted devices designed to open or close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas of dead volume where fluid can become trapped. Only the inside of the tubing has contact with...
Read More »
Visit EMAG at Westec 2017 Booth 2025!
At Westec 2017, September 12-14 at the Los Angeles Convention Center, EMAG will feature manufacturing systems for precision metal components with the modular VL 2 vertical-pick up turning machine for the efficient machining of components up to 100 mm in diameter. The VL series will be on display for visitors to experience the successful EMAG modular inverted vertical lathe design. With the aim to...
Read More »
EMAG at CMTS 2017, Booth 2418!
At CMTS 2017, September 25-28 at the International Centre in Mississauga, ON - EMAG L.L.C. will feature a variety of our manufacturing systems for precision metal components. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted vertical lathe design. With the goal to develop a system of modular...
Read More »