Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Hinge Clamps provide maximum operating pressure of 3,600 psi.
Hinge Clamps are designed for 500,000 cycles, and have swivel contact bolt and reinforced hinge mechanism. Suited for clamping in narrow recesses, unit has linkage to move clamping arm forward as it pivots into clamping position, allowing clamp to exert nearly perfectly vertical clamping force. Designed for manifold mounting, product is available with clamping forces from 500-3,200 lb, with...
Read More »Booster Propeller suits wide range of mixing applications.
Used with submersible mixers in large-flow applications, Phlo Booster(TM) propeller moves powerful axial jet stream of water with minimum power consumption, improving agitation and overall mixing system efficiency. It features thin-sectioned, double-curved, self-cleaning blades made of reinforced synthetic resins covered with special protective coatings. Powered directly through primary mixer,...
Read More »USB Sensor Interface suits embedded DAQ applications.
USB2250 PCI Sensor Interface enables real-world data acquisition on PC via USB port. Interface features 16-bit resolution, 100 kHz conversion rate, 16 input channels, sensor excitation, auto-zero capability, and accepts any combination of single-ended or differential input types. Unit allows user to set sensor type, gain range, channel, and all other input parameters, which can be saved to...
Read More »
Valves are available in sizes ranging from ½-4 in.
Clampseal-® Stop, Check, and Stop Check Valves are offered with ASME pressure classes up to 4500 and butt weld or socket weld connections. Standard materials include A105, F22, F91, F316, F347, Inconel and Monel, with custom materials and special service variations, such as fire-safe and cryogenic, available. Other features include cartridge-replaceable packing chamber, graphite packing system...
Read More »
Servo Motor Controller is designed for ADAM-5550 series PACs.
ADAM-5240 4-axis servo motor control module simplifies stepping and pulse-type servo motor control. Embedded with intelligent novaR MCX314-motion ASIC card that includes various motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, programmable T/S-curve acceleration/deceleration rate, and position management functions, device performs motion control...
Read More »
Air Blow Gun removes heavy or stubborn debris.
Designed for use with tow-behind or large capacity compressors, Coilhose Cannon-® features power-assisted Extreme Ease Trigger(TM) and is available with 2, 24, or 48 in. extensions with standard safety nozzle tip. Made from die cast aluminum, machined brass, aluminum, and stainless steel, unit requires inlet pressure of at least 90 psi and a hose ID of at least -½ inch. Standard model consumes...
Read More »
Ground Fault Relay offers adjustable time delay of 0-1.5 sec.
Connected to WKE Series current transformer, RCD300M2 senses fault current, and if fault current exceeds relay trip setting, it activates and sends signal to disconnect high potential from equipment. Features include adjustable trip setting of 10 mA to 3 A, relay supply voltage of 24V AC/DC, or 120 Vac, 50-60 Hz, breaking capacity of 3 A at 240 Vac and 0.3 A at 110 Vdc, and fault indicator LEDs....
Read More »
Pipe and Sewer Cleaning System works automatically.
With ability to feed hose at up to 40 fpm and rotate hose reel at 30 rpm, Roto-Reel-® units are available in 2 models that feed high-pressure water jet hose for industrial pipe and sewer cleaning. Roto-Reel 200 has hose capacity of 200 ft and is intended for applications requiring water pressure of up to 20,000 psi, while Roto-Reel 500 has hose capacity of 500 ft and is used for applications up...
Read More »
Vacuum Suction Cups are non-marking and wear-resistant.
Suited for packaging and product handling equipment, Anver Clean Vacuum Cups are molded from polyurethane offered in 60 Durometer clear and 50 Durometer orange versions. Available in 3-6 in. O.D. sizes, cups come in flat style with cleats on bottom for sure grip and in single bellows style for products requiring forgiving attachment. Applications include handling painted products and glass,...
Read More »Alignment Kit facilitates creation of reference square plane.
Configured for creating precise reference planes with laser reference beam from Microgage Alignment System, precision 90-Line Square Plane suits squaring machinery, adjusting machine tools, positioning slides, and checking gantries. Kit comes with precision 2-axis positioning mount to center incoming laser reference beam as well as digital receiver for centering to 90-Line on laser beam. Machined...
Read More »