Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Transmitter helps locate underground utility lines.
Dynatel Locators 2200M Series 12 W transmitter provides four active frequencies (577 Hz and 8, 33, and 200 kHz), which can be used individually or simultaneously to compensate varying field conditions and 3 induction frequencies (8, 33, and 200 kHz). It uses either internal 6 x C-size alkaline batteries or rechargeable sealed gel-cell battery that plugs into external power plug. Unit features...
Read More »Handheld Communications Test Instrument is battery powered.
With built-in lithium cell supporting at least 6 hr of operation, GAO701C helps in installation, testing and maintenance of ADSL equipment. It conducts tests while browsing previous records, and can be connected to computer via serial port to enable storage, analysis and printing of test data. Tester can store as many as 7 test settings and 100 groups of test results. Unit is also used as digital...
Read More »Microcontroller serves as replacement for obsolete models.
TK80C51FA microcontroller combines 256 bytes of RAM with 3 timers, serial channel, PCA array, 7 source/4 level interrupt capability, and hardware watchdog. It is designed as pin-for-pin, code and timing compatible drop in replacement for 80C51FA microcontroller previously offered by Intel. Packages are available in 44-pin QFP, 44-pin PLCC, and 40-pin PDIP.
Read More »
Articulated Jib Lifter suits low head room applications.
Conco AJL offers lifting capability from 165-665 lb along with a lift range of up to 120 in. and reach from 8-16 feet. Features include threaded interface at end of cable and safety latch hook at end of chain. Secondary arm can be mounted above primary arm in low headroom clearance applications, and primary and secondary joints come with 360-
Read More »
Automotive Power Inductor is rated for 180
Featuring powdered iron alloy core material, HA55 Series is designed for automotive underhood environments. Products have current inductance values from 7-20 -µH, and recommended frequency is up to 400 kHz, depending on device. Rated current range is from 40-60 A, with saturation current from 43-50 A, and DC resistance is from 1.7-3.35 mW. Operating temperature range starts from -40-
Read More »
RFID Asset Tracking Solution works automatically.
Designed to track and manage mobile and fixed assets, DL810, 13.56 MHz RFID asset tracking solution has readability up to 90 cm and uses anti-collision algorithm to enable stack of tagged assets to be scanned simultaneously. Installed throughout entrance, multi-tag reader can help to find assets even if they are placed in wrong location.
Read More »
CPU Board features 45 nm Intel Core 2 Duo processor.
Equipped with Intel GS45 Graphics and Memory Controller Hub and Intel I/O Controller Hub ICH9M, 3U Model CP308 is available in 2.26, 1.86, and 1.2 GHz versions with 1,066, 1,066, or 800 MHz FSB, respectively. CompactPCI CPU board features up to 8 GB DDR3-SODIMM RAM, up to 7 USB 2.0 ports, 2 COM ports, 2 Gigabit Ethernet ports, and 4 SATA interfaces. On system side, Model CP308 provides PCI...
Read More »Hybrid Drive is suited for stop-and-start Class 8 vehicles.
Hydro-mechanical series reduces fuel consumption, emissions, and brake wear while increasing productivity in vehicles used in high start-and-stop applications, such as refuse trucks. It replaces conventional transmission with one that marries variable features of hydrostatic drive, suited for urban routes, with performance of mechanical drive, suited for highway speeds. Also, accumulated energy...
Read More »
Gas-Fired Walk-in Oven provides temperatures up to 500
With 48 x 48 x 72 in. workspace, No. 1003 includes modulating natural gas burner with 800,000 BTU/hr and 3 hp recirculating blower providing vertical upward airflow. It features 4 in. thick insulated walls; aluminized steel exterior; Type 304, 2B finish SS interior; and insulated floor with truck wheel guide tracks. Onboard safety equipment processes flammable solvents and unit also includes...
Read More »
Cases accept 3U subracks and chassis.
INSTRUMET cases are available in 3U x 10.5 x 13.8, 3U x 19 x 13.8, and 3U x 19 x 17.7 in. sizes. Enclosures are manufactured in aluminum, with fixing screws hidden on underside, and feature base and removable rear panels with ventilation slots, 2 die-cast front bezels with caged nut mounting points, and top panel. All models feature 2 internal support rails which simplify installation of heavy...
Read More »