Aprima Medical Software, Inc

Adhesives & Sealants

CINTEC Announces Anchoring System to Be Used for Structural Stabilization of Historic Church

CINTEC America Inc. of Baltimore, Maryland, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, announces that its anchoring solution for masonry structures has been selected to repair the two towers of the historic First Lutheran Church of the Reformation of New Britain, Connecticut. The award-winning patented CINTEC Anchor System process begins...

Read More »
Bilsing Carbon Fiber Master Boom Meets GM World Tool Standards Lighter than Aluminum, Stronger than Steel
Machinery & Machining Tools

Bilsing Carbon Fiber Master Boom Meets GM World Tool Standards Lighter than Aluminum, Stronger than Steel

Roseville, MI- – Bilsing Automation has announced that it offers Carbon Fiber (CF) Master Booms that meet dimensional specification and standards as set by General Motors for its World Tool Boom. In independent laboratory tests comparing steel, aluminum, and carbon fiber booms tested to 1,000,000 cycles with approximately 350 lb. force of tension and compression loaded, Bilsing Carbon Fiber...

Read More »
Electronic Components & Devices

ProPhotonix Adds New Laser Diodes from Oclaro to Product Offerings

ProPhotonix Limited, (London Stock Exchange - AIM: PPIX and PPIR; OTC: STKR), a designer and manufacturer of LED illumination systems, laser diode modules and a distributor of premium vendor's laser diodes, today announces the addition of four new visible laser diodes from Oclaro that we will distribute, including the HL63193MG, HL63153AT, HL63163DG, and the HL40041MG. The new HL63193MG offers...

Read More »
Cleaning Products & Equipment

MecWash Celebrates Its 20th Anniversary by Revisiting First Ever Installation

Aqueous component cleaning specialist, MecWash Systems Limited, is celebrating its 20th anniversary by revisiting its first ever installation project at The Pegler Yorkshire Group. Founded in the 1890's, The Pegler Yorkshire Group is now a leading manufacturer of advanced plumbing, heating and engineering products, distributing to over 110 countries worldwide. In November 1994, Pegler Yorkshire...

Read More »
Concrete Plastic Wall Forms feature stay-in-place design.
Architectural & Civil Engineering Products

Concrete Plastic Wall Forms feature stay-in-place design.

Measuring 24 in. wide x 6 in. thick, Extrutech FORM System snaps together with double-spline, E-Locking System. Forms can be insulated with 2 in. of foam board for R-14, and brick or stone masonry may be added to exterior to optimize building appearance. Featuring high gloss, non-porous surface that resists damage,- waterproof concrete forms will never rust, rot, corrode, or discolor and are...

Read More »
Metal Finishing-Plating targets flexographic industry.

Metal Finishing-Plating targets flexographic industry.

Offered- in medium and high phos, corrosion-resistant Electroless Nickel coating- (MIL-C-26074, AMS-C-26074, ASTM B733, AMS 2404) is available for use on doctor blades, cylinders, rollers,- large plates, rotors, and web guiding systems. Process results in smooth finish and is able to plate parts up to 1,500 lb and 10 ft long. Painting and powder coating are also available, along with hard...

Read More »
PoL DC/DC Converters come in high-efficiency 12 and 20 A models.
Electrical Equipment & Systems

PoL DC/DC Converters come in high-efficiency 12 and 20 A models.

Respectively delivering up to 12 and 20 A, 20.32 x 11.43 x 8.55 mm OKL2-T/12 and 33.02 x 13.46 x 8.75 mm OKL2-T/20 offer 93%–95% typ conversion efficiency and come in inspectable Land Grid Array (iLGA) package- that facilitates probing of all signal pads and visual inspection. Both non-isolated models have- 2 variants that accommodate nominal 5 Vdc (2.4–5.5 Vdc) or 12 Vdc (4.5–14 Vdc)...

Read More »
Sensors, Monitors & Transducers

Pressure Transducer delivers 0.25% FS accuracy.

Available in 7 pressure ranges from 0–14.5 psi to 0–232 psi, 3500 series- operates over -40 to +257°F range, and offers absolute, compound, and gauge reference capability for applications across medical and general industrial markets. Products are designed for >100 million FS cycles, with- long term drift of 0.2% FS/year. These 1.77 in. long, 1.23 oz transducers, with 316L stainless steel...

Read More »
High-Speed Cameras suit QA and event analysis applications.
Optics & Photonics

High-Speed Cameras suit QA and event analysis applications.

Housed in 80 x 80 x 53 mm C-mount package, EoSens CXP Cameras feature integrated CoaXPress real-time data interface, which provides data rate up to 6.25 Gbps over single coaxial cable and 25 Gbps over 4 coaxial cables. Model 3CXP features 1,690 x 1,710-pixel format, max resolution of 3 MP, and data transfer up to 560 fps, while 4 MP Model 4CXP has 2,336 x 1,728-pixel format and 560 fps transfer...

Read More »
Compression Springs support high loads with minimal bulk.
Mechanical Components and Assemblies

Compression Springs support high loads with minimal bulk.

Intended for those requiring firm but not rigid springs designed with slender profiles, High Pressure Series Compression Springs comprise 144 slender parts packed with pressure ratings of 300, 400, and 500 psi. Products are manufactured in 17-7PH stainless steel and are passivated, shot peened, and preset for corrosion resistance, strength, and toughness. Springs suit small spaces and such...

Read More »

All Topics