Aprima Medical Software, Inc

Machinery & Machining Tools

CNC Lathe provides 17,600 lb part capacity.

Intended for oil and gas industry work, Big Bore VDF 800 DUS features 14 in. spindle diameter, 32 in. swing over bed, and 4,500 lb Z-axis cutting force. Main drive is rated at 50 hp continuous, 74 hp max with 7,200 Nm max torque. Top speed of 900 rpm enables machine to handle range of small diameter parts as well. Built on box-type Meehanite cast iron bed measuring 22 in. wide, lathe offers...

Read More »
6-Axis CNC Tool/Insert Grinder produces high-quality tools.
Machinery & Machining Tools

6-Axis CNC Tool/Insert Grinder produces high-quality tools.

Model 628XS, GrindSmart series 6-axis grinder for manufacturing rotary cutting tools and inserts features rotary glass scale on tool rotation axis. Machine's software features interpolation capability and unit also optimizes surface finish on flute and ball relief. It is designed for producing endmills, drills, step drills, form tools, reamers, taps, and any derived variations, as well as...

Read More »
Pinch/Peel Grinder optimizes concentricity on long/thin parts.
Machinery & Machining Tools

Pinch/Peel Grinder optimizes concentricity on long/thin parts.

Incorporating fifth axis, ShapeSmart NP5 can grind flats and unround surfaces on cylindrical parts. Machine utilizes 2 different grinding wheels running on separate spindles and positioned on independently controlled CNC linear slides. Roughing and finishing are performed in one pass, eliminating separate process. Applications include form grinding of cutting tools blanks as well as production...

Read More »
Grinding Tool Design Software features 3D simulator.
Software

Grinding Tool Design Software features 3D simulator.

VGPro is designed to help operators and programmers facilitate environment of efficiency and collaboration within organization. It includes Simulator engine v6.0 for high-speed simulation of any tool design. Program aids in design of endmills, including ballnose, corners, and tapers, as well as helically, sheared, and straight form tools and profile inserts.

Read More »
Electronic Components & Devices

30 V Power MOSFET offers 180 A current capacity.

OptiMOS(TM)-T2 30 V MOSFET model IPB180N03S4L-H0 is N-channel device with drain current of 180 A and RDS(on) of 0.9 mW at 10 V gate-to-source voltage. Unit operates in applications over 500 A where operation of many MOSFETs in parallel is required, and can provide battery protection through reverse connection. Available in D2PAK-7 package, it meets AEC-Q101 specifications and also utilizes...

Read More »
5-Axis Touch-Trigger Probe Head has infinite-positioning axes.
Fluid & Gas Flow Equipment

5-Axis Touch-Trigger Probe Head has infinite-positioning axes.

Model PH20 utilizes infinite rotary positioning and unique head touch capability for high-speed point capture with minimal CMM movement. Additional time savings are achieved by synchronizing motion of head and CMM between measurements, and inferred calibration technique determines head orientation and probe position in single operation, allowing subsequent measurements at any head angle. Designed...

Read More »
Sensors, Monitors & Transducers

Crash Sensing System prevents destruction of machine components.

Suited for machine tool applications, Crashsensor ACS-3 combines 3-axis acceleration sensor, evaluation electronics, and microcontroller in one housing that can be mounted directly on machine or headstock. Once activated, system monitors acceleration to various limits. If limit is exceeded, datalogger writes information to alarm recorder with date and time, which can be read out via serial...

Read More »
Health, Medical, & Dental Supplies and Equipment

Alltech's Bioplex Zinc Now OMRI Listed

[Lexington, KENTUCKY] - Alltech's Bioplex Zn 15% OA is OMRI listed. This comes shortly after Alltech's Sel-Plex 2000 was OMRI listed as well. OMRI, which is specific to the USA, is a national nonprofit organization that determines which input products are allowed for use in organic production and processing. "With the OMRI certification, organic farms can now incorporate both of these products...

Read More »
CJWinter is Now a World-Wide Licensed Supplier of MAThread & MATpoint
Fasteners & Hardware

CJWinter is Now a World-Wide Licensed Supplier of MAThread & MATpoint

Rochester, NY - MAThread® and MATpoint® are patented threaded fasteners used mainly for the auto industry for improving product assembly. As we all know assembly failures due to cross threading and galling are both time consuming and expensive. The cutting-edge technology of MAThread® completely eliminates this problem by its unmatched anti-cross-thread performance. MAThread® &...

Read More »

All Topics