Aprima Medical Software, Inc
Carrollton, TX 75006
Share:

Join THG Automation at PRI 2023 in Indianapolis, IN!
Come say hello at BOOTH 5761 THG Automation is excited to be returning to PRI 2023 this December right here in our hometown of Indianapolis. The PRI Show is the ultimate destination for racing professionals and enthusiasts, featuring cutting-edge products, the latest innovations, and a unique opportunity to network with industry leaders. As a valued member of our community, we wanted to extend a...
Read More »Figaro USA Product Announcement: Next Generation Hydrogen Sensor TGS2616
Figaro USA Inc. is pleased to announce its latest offering—Our next generation hydrogen sensor, TGS2616. Developed with a brand-new proprietary sensing element, our new hydrogen sensor boasts a highly selective response to hydrogen with minimal influence from alcohol-based interference gases. Thanks to our long history with MOS type sensors, we are able to fit this performance in a small form...
Read More »
When Varying Sanitation Levels Make Sense While Improving Your Bottom Line
Multi-Conveyor (Winneconne, WI) - Multi-Conveyor recently built a food-grade transport conveyor system consisting of two levels of sanitary compliance. The initial conveyors are stainless steel constructed for maximum 3A Dairy compliance as required to move processed cheese in a food-grade, wash-down atmosphere through the bagging process. The filled bags then travel through a sectional wall,...
Read More »
Pneumatic Vacuum Conveyor Offers Both Lean and Dense Phase in Same System
Volkmann VS Conveying System Can Switch to Suit Different Materials Bristol, PA: The Volkmann VS pneumatic vacuum conveying system from process equipment manufacturer Volkmann USA, Bristol, PA (https://www.volkmannusa.com/), automatically transfers bulk materials in a choice of lean phase or dense phase using the same conveying system. Featuring a designed-in ball valve in the feeding elbow, the...
Read More »
Flexible, Thixotropic, One Component Dual Cure Epoxy
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It cures readily within 20-30 seconds when exposed to a UV light source emitting a wavelength of 320-365 nm. The adhesive can also undergo a secondary heat curing for shadowed areas, typically curing in 60-90 minutes at 80-85°C. The system's adaptability to varying depths...
Read More »
SCHURTER Classic Power Entry Module With Circuit Breaker Gets Even Better
Santa Rosa, California, November 28th, 2023 – SCHURTER series DG11 and DG12 with and without mains filter features a first-of-its-kind ingress protection solution for IEC inlets, consisting of a seal gasket between the connector and mating V-Lock power cord. The blue colored latch of the V-Lock power cord and blue inlay of the appliance inlet indicate that the two have been equipped to provide...
Read More »
Power Supplies 30-75 W Quarter Brick DC-DC Converters Feature Very Wide Input Ranges for Rail and Industrial Applications
TDK Corporation (TSE:6762) announces the introduction of the 30 to 75W rated TDK-Lambda PYQ series of quarter brick footprint DC-DC converters. Capable of operating from an ultra-wide 12:1 input of 14 to 160Vdc (PYQ50) or 8:1 input of 9 to 75Vdc (PYQ750, the converters are compatible with 12V, 24V, 48V, 72V, and 110Vdc nominal system voltages. Applications include railroad rolling stock and...
Read More »
Type E Bearings Will Protect Your Application Against Costly Downtimes
NTN’s Bower Type E mounted bearing units are designed to better support your demanding applications that experience misalignment, heavy loads, contamination or excess vibration. These demanding applications require rugged seal protection to keep your equipment up and running. The Bower Type E is protected by a double lip contact seal that keeps contamination out and allows for grease purge...
Read More »
Widest Ever Choice of Metcase Combimet 19 Rack Cases
COMBIMET is now METCASE’s largest and most popular range of 19 rack cases with original, open-top, smooth/solid-top and super-deep versions. COMBIMET is METCASE’s most advanced and most cost-effective 19 enclosure. Applications include networking, communications, sound/studio systems, laboratory instruments and industrial computers/control technology. These smart aluminum enclosures have a...
Read More »
Metallic Ladder Introduces Specialized Aero Ladder for Aircraft Maintenance
Metallic Ladder introduces specialized Aero Ladder for aircraft maintenance Randolph, N.Y. – October 16, 2023 – Metallic Ladder has introduced the Aero Ladder, a high-quality, American-made aluminum specialty aircraft maintenance ladder for mechanics to reach electrical equipment bays, pylon panels, wheel wells, and other hard-to-reach areas on aircraft like the Boeing 777 and McDonell...
Read More »Hänel Storage Systems Supports CASA of Allegheny County
Warrendale, PA - December 6, 2023 – Hänel Storage Systems, a leader in the manufacture and integration of automated vertical storage solutions throughout North America, has pledged a donation to CASA of Allegheny County that will help support abused and neglected children. CASA of Allegheny County advocates for the rights and well-being of victimized children within the child welfare system,...
Read More »Timken Recognized by Newsweek as One of America's Most Responsible Companies for Fourth Year in A Row
North Canton, Ohio, Dec. 6, 2023/PRNewswire/ - The Timken Company (NYSE: TKR; www.timken.com), a global leader in engineered bearings and industrial motion products, has been recognized by Newsweek and Statista Inc. as one of America's Most Responsible Companies 2024. Timken has made the prestigious list for four straight years, reflecting the company's continued commitment to corporate...
Read More »Regal Rexnord Corporation Announces Publication Of Annual Sustainability Report
Milwaukee, Dec. 5, 2023/PRNewswire/ - Regal Rexnord Corporation (NYSE: RRX) today published its annual Sustainability Report. The report reaffirms critical elements of the Company's growth strategy, and provides an update on how it is executing them: Developing products and solutions that customers value, have leading energy efficiency, and are manufactured with sustainability in mind; Creating...
Read More »Guill Rheology Lab Now Available as A Commercial Service
Guill Tool, a global leader in extrusion tooling, recently announced that its state-of-the-art rheology lab is offering its services for a fee to all those interested. Measuring the flow characteristics of plastics and rubber helps predict how a customer’s material will flow through the company’s extrusion dies before production. In addition, tooling geometry is virtually optimized, and the...
Read More »Key Roles Filled: Manufacturersâ™ Association Introduces Training and Business Development Manager and Automation and Maintenance Coordinator
(York, PA) – The Manufacturers’ Association, a regional trade agency, created two new positions and appointed Becky Becker, SPHR to Training & Business Development Manager and Joe Amato to Automation & Maintenance Coordinator. The Association, founded in 1906, is the voice of manufacturing for hundreds of member & non-member organizations in southcentral PA & and northern MD. The Association...
Read More »Matter USA Formed to Service North American Metals Market
Major Italian supplier of intralogistic metal handling systems emerges here Matter SRL Managing Director Giuseppe Rotondi today announces the recent formation of Matter USA Corporation, the company’s new subsidiary for application engineering, sales, and service for this major Italian builder of custom and modular Automated Storage & Retrieval Systems (ASRS) for the metals industry. Matter...
Read More »Nordfab Has Completed Facility Expansion to Provide Faster Shipping
Thomasville, NC, USA – North America’s largest manufacturer of clamp-together ductwork for dust collection has just grown even larger. Construction is complete on an added 54,000 square feet of production and warehouse space, part of Nordfab Ducting’s $5.5 million expansion project, Nordfab Now®, which will allow Nordfab to very quickly ship their most commonly ordered ducting products....
Read More »Concurrent Technologies Corporation Named to U.S. Veterans Magazineâ™s 2023 Top Veteran-Friendly Companies List
Johnstown, PA, November 29, 2023 - Concurrent Technologies Corporation (CTC) is honored to be included in U.S. Veterans Magazine’s (USVM’s) Top Veteran-Friendly Companies for 2023. This is the third year that CTC has made the list. USVM annually evaluates companies; schools; government and law enforcement agencies; and supplier diversity programs for veterans. The goal is to open...
Read More »Kooltronicâ™s Product Testing Laboratory Gets An Upgrade
November 10, 2023 – Kooltronic, Inc. of Pennington, NJ recently completed an upgrade of its product performance and environmental testing laboratory. Kooltronic's previous data acquisition system has been replaced with new supervisory control and data acquisition (SCADA) hardware and software from National Instruments. The system automatically controls, collects, and analyzes data for two...
Read More »The Original With Cult Status - Visitors to HERMLE Open House Almost Back to Pre-Covid Levels
For four days, Maschinenfabrik Berthold HERMLE AG once again opened the doors to its traditional Open House exhibition. Over 1100 companies and 2500 visitors, including 800 international guests, gained a comprehensive understanding of products, automation solutions, digitalization, Industry 4.0 solutions, and HERMLE services, such as service competence, additive manufacturing, and the...
Read More »