Products in the News

Products in the News

Wausau Helps Cecil College's New Engineering and Mathematics Building Achieve Aesthetic, Environmental, Performance Goals

April 3, 2015

Wausau, Wisconsin – Maryland’s Cecil College opened its new three-story, 28,683 -square-foot, engineering and mathematics (EM) facility with the start of the 2014-15 academic year. Designed by Marshall Craft Associates, the $19.7 million building is pursuing LEED® Silver certification, the first in Cecil County... Read More

Products in the News

PSIGEN Document Capture and Imaging Solutions Certified with Epson WorkForce® Scanners

April 3, 2015

PSIGEN and WorkForce Document Scanners Deliver Increased Efficiency and Flexibility for SMBs and Enterprises LONG BEACH, Calif., – Epson America, Inc., a leading provider of digital imaging solutions, today announced several of its business document scanners have been certified for use with PSIGEN Software, a... Read More

Products in the News

NAB 2015: Digital Nirvana and Nexidia Provide Integrated Caption Quality Reporting Solution

April 3, 2015

Newark, CA – Digital Nirvana, developers of a media management platform for content creation, capture and delivery, have announced an integration with Nexidia Illuminate, a media analysis platform, enabling caption compliance quality reporting and realignment software. The FCC mandates that captions for the hearing... Read More

Products in the News

SEPCO, Solar Electric Power Company, Illuminates Area and Walkway Lighting for Famed U.S. Marine Corps Air Station Miramar, San Diego

April 3, 2015

• Solar-powered LED outdoor area and walkway lighting at military installation uniquely meets energy-reduction standards for federal facility; provides high visual-acuity white-light, 100% off-grid at a fraction of previous on-grid HPS light, with double the lamplife. San Diego, CA – 143-units of outdoor area and... Read More

Products in the News

Makino at NPE 2015 Plastics Show

April 3, 2015

Orlando, FL – Makino showed their latest solutions for the plastics industry at the NPE 2015 International Plastics Show in Orlando, Florida. The Makino D300 5-axis Vertical Machining Center displayed is designed to deliver superior sustained dynamic accuracy in full five-face machining applications. Equipped with... Read More

Products in the News

Cambridge Pixel Radar Modules Supplied to SOFRESUD for Oil Rig Security in Gulf of Guinea

April 3, 2015

• Cambridge Pixel software integrated with SOFRESUD’s VMAS system to enhance effectiveness of hostile target detection in region where piracy and maritime threats can drastically jeopardise production CAMBRIDGE, United Kingdom – Cambridge Pixel (www.cambridgepixel.com) a leading provider of primary radar display... Read More

Products in the News

Inovar Increases Throughput and Flexibility with Selective Solder from Ersa

April 3, 2015

Plymouth, WI – Kurtz Ersa North America, a leading supplier of electronics production equipment, announces that Inovar has purchased a VERSAFLOW 3/45 selective soldering system with dual solder pots. Inovar is a leading contract manufacturer in the Intermountain West located in Logan, Utah. The VERSAFLOW 3/45 will... Read More

Products in the News

Spotlight on 4K - Rohde & Schwarz Devoting its Product Portfolio at NAB 2015 to the High-Resolution Standard

April 3, 2015

Rohde and Schwarz has long been supporting the 4K digital video format with its range of products. At NAB 2015 in Las Vegas, the company will showcase yet another application for this format with its RS VENICE ingest and production server. In live demonstrations, Rohde & Schwarz will also show how its current... Read More

Products in the News

Shotoku Announces Landmark Sale To Argentinian Broadcaster America TV

April 3, 2015

Buenos Aires, Argentina – Shotoku Broadcast Systems, a leading international manufacturer of advanced camera support products, has announced the sale and installation of 15 Shotoku TP-200 lightweight pedestal and state-of-the-art SX300 EFP pan tilt head systems to America TV, a channel owned by Multimedios America... Read More

Products in the News

Scienscope International to Exhibit at NEPCON China

April 3, 2015

Chino, CA – Scienscope International, a complete inspection solutions provider, will exhibit in Booth # B-1E46 at NEPCON China 2015, scheduled to take place April 21-23, 2015 at the Shanghai World EXPO Exhibition Convention Center. Company representatives will demonstrate Scienscope’s line of state-of-the-art X-ray... Read More

Products in the News

Comtech Xicom Technology Receives First Annual Impact Award for New SuperPower(TM) SATCOM Uplink Amplifiers from SatNews Publishers

April 3, 2015

SANTA CLARA, CALIF.  – Comtech Xicom Technology, Inc., the leader in high power amplifier products for satellite communications (SATCOM), received the first Annual Impact Award from SatNews Publishers during Satellite2015, for their introduction of a new line of SuperPower™  traveling wave tube amplifiers (TWTAs... Read More

Products in the News

Curtiss-Wright Awarded Contract by Boeing

April 3, 2015

For Rugged Data Acquisition technology used in NASA’s Commercial Crew Program ASHBURN, Va. – Curtiss-Wright Corporation (NYSE: CW) today announced that its Defense Solutions division was awarded a contract by The Boeing Company to supply rugged data handling avionics for use in the Crew Space Transportation... Read More

Products in the News

Rugged KPS Thermostat Available from Peerless and Danfoss!

April 3, 2015

Peerless Electronics is stocking the 060L312166 from Danfoss. The 060L312166 is part of the rugged Danfoss KPS thermostat and temperature switch series. Special attention has been given to meeting important demands for a high level of enclosure, a robust, compact construction and resistance to shock and vibration... Read More

Products in the News

PipeManProducts.com Becomes Distributor for PACE 1039 Mini-MiteTM Roll-Groover

April 3, 2015

Concord, CA – PipeManProducts.com has been approved as an authorized distributor of the industry leading PACE 1039 Mini-Mite™ Roll-groover. "PipeManProducts.com has done an excellent job in educating the waterworks industry of our many innovative plumbing products and tools. We areproud that that they have decided... Read More

Products in the News

Future Electronics Promotes NXP's LPC82x Series of ARM Cortex-M0+ based MCUs

April 3, 2015

Pointe Claire, Quebec - Future Electronics, a global leading distributor of electronic components, recently announced immediate availability of the LCP82x Series of ARM Cortex-M0 based MCUs from NXP. NXP's LPC82x Series is an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30... Read More

Products in the News

CGTech to Show VERICUT 7.3 at EASTEC

April 3, 2015

Irvine, California - At EASTEC 2015 the latest version of VERICUT, V7.3, will be featured in CGTech’s booth: 5344. VERICUT CNC machine simulation, verification and optimization software simulates all types of CNC machining. It operates independently, but can also be integrated with leading CAM systems. A common... Read More

Products in the News

E|Tab Certifies Epson Printers for Its Restaurant and Hospitality Mobile Ordering Solution

April 3, 2015

Integrated Solution Allows Customers to Control Dining or Entertainment Experience From Personal Smart Phones SAN FRANCISCO, – TRANSACT15 - Epson America, Inc., a leading supplier of value-added Point of Sale (POS) solutions, today announced that e|tab, a provider of affordable hospitality and restaurant... Read More

Products in the News

Millstar Introduces New Aluminum Cutting Insert Line

April 3, 2015

April, Mich.– Millstar continues to bring the latest in precise cutting tool solutions for every market with their new Aluminum Milling Cutters line. This versatile aluminum cutting insert line features modular screw-on heads, shell milling and end mill cutters. All of the featured products come in side clearance... Read More

Products in the News

Hanwha Machinery America Exhibits at PMTS 2015

April 3, 2015

Franklin, Wisconsin - Hanwha Machinery will be exhibiting their CNC Swiss Style Turning Centers at PMTS 2015 in Columbus, Ohio. The event is scheduled April 21-23, 2015. PMTS Booth #548. Hanwha models shown will be XE20H, XD20V with B-Axis option and XD38IIH(Y2).  High-performance and entry level Swiss Style lathes... Read More

Products in the News

Ventless Fire Hoods Offer New Freedom to Commercial Kitchens

April 3, 2015

With a powerful explosion in the East Village in New York City on Thursday, which caused two buildings to collapse and ignited a large fire that quickly spread to neighboring buildings, there is no better time to heed the importance of safe, quality and reliable appliances installed by a reputable contractor, such... Read More