Products in the News

Products in the News

Wire Decking Increases Fire Prevention and Can Lower Insurance Rates

February 9, 2016

With an increased emphasis on cleanliness and fire resistance, wire decking has emerged as the ultimate choice in all of your storing needs. In recent years, many municipalities are adopting and enforcing strict fire prevention codes in warehouses. Meaning, if you are caught off guard without suitable wire decking... Read More

Products in the News

Innovate for the Future

February 9, 2016

Powder Systems Limited (PSL) at Interphex New York PSL have been exhibiting at the New York trade show for more than 10 years, and this year the business will have two new innovative products to launch at the Javits Conventions Center, from 26-28 April 2016 on booth 2232. PSL has chosen Interphex, a premier... Read More

Products in the News

Poron Foams for Compression Set Resistance

February 9, 2016

Poron foams are a family of cellular urethanes that have excellent compression set resistance. Made by Rogers Corporation, these urethane foams die cut cleanly and are a good choice for shock isolation pads,cushions, and enclosure gaskets. Poron foam materials are available in different grades and thicknesses... Read More

Products in the News

Davis-Standard and Conair Collaborate for Medical Tubing Innovation

February 9, 2016

Pawcatuck, Conn. – Continued growth in the healthcare segment has meant steady collaboration between two industry leaders, Davis-Standard and Conair. The two companies are busy supporting customers across the globe with medical tubing systems equipped with Davis-Standard extruders and controls and Conair downstream... Read More

Products in the News

Leesburg Concrete Company Delivers Relocatable Precast Loading Dock Ramp

February 9, 2016

Leesburg Concrete Company, Incorporated (LCCI) recently installed a relocatable precast concrete loading dock ramp. In late 2015 LCCI received a call from IMS Technology Services which was opening a new location in Orlando, FL. They needed a ramp that would allow the interior floor of a cargo/utility van to be... Read More

Products in the News

Methods for Cutting Large Gaskets Save Money and Increase Material Yield

February 9, 2016

Large gaskets are used in a wide variety of applications such as outdoor lighting and electronic equipment enclosures. Because these large custom gaskets can use significant amounts of material, technical buyers need to find ways to control costs. For product designers, cost savings are important, too. Precision die... Read More

Products in the News

The Baby of the Family but Tough as They Come

February 9, 2016

Kaivac's model 1215 is the smallest member of the No-Touch Cleaning® family but delivers industrial strength cleaning to tackle smaller cleaning tasks that do not require the full 500 psi of its bigger brothers. At 150 psi, the 1215 is compact, lightweight, easy to maneuver, and can even fit in many janitorial... Read More

Products in the News

TE Connectivity's Macro Sensors SSIR LVDT Position Transmitters Withstand High Pressure Washdowns and Contaminants of Sawmills

February 9, 2016

TE Connectivity's Macro Sensors SSIR 937 Series Submersible LVDT Position Transmitters are becoming a popular choice for (blade) position measurement applications within sawmills and wood products processing plants due to their high tolerance to water, debris and harsh operating conditions. In addition to... Read More

Products in the News

CAS DataLoggers Offers T&D Discount!

February 9, 2016

Wireless and Wired Temperature Loggers and More CHESTERLAND, OH — CAS DataLoggers is pleased to announce that we’re discounting prices on our TD Data Loggers! These products are popular with users working in industry, healthcare, labs and more. TD offers compact, water-proof Temperature loggers for harsh... Read More

Products in the News

New ZOOM Fiber Laser Highlights MC Machinery Systems' FABTECH Canada Booth

February 9, 2016

Wood Dale, IL – Don't miss the variety of products built and designed for fabricators in the MC Machinery Systems, Inc. booth, #713, at this year's FABTECH Canada, March 22-24 in Toronto. Meet with product experts and learn about our newest fiber laser technology as well as the tried-and-tested machinery fabricators... Read More

Products in the News

Indium Corporation to Feature Low-Voiding Solder Paste at IPC APEX 2016

February 9, 2016

Indium Corporation will feature its void-reducing no-clean solder pastes to help customers Avoid the Void™ at IPC APEX Expo, which will be held on March 15-17 in Las Vegas, Nev. Indium Corporation, the industry-leading source of void-reducing materials and results, has specifically formulated Indium10.1 solder... Read More

Products in the News

Vishay Intertechnology at APEC 2016 March 20-24 Long Beach, California Booth 2017

February 9, 2016

At APEC 2016, Vishay Intertechnology will be highlighting its latest industry-leading power MOSFET, IC, passive component, and diode technologies for a wide range of applications. New Products on Display at APEC 2016 600 V E Series Power MOSFET Saves Space and Increases Efficiency Offered in the compact, fully... Read More

Products in the News

AVX Reduces the ESR of its F38 Series Miniature Polymer Tantalum Capacitors

February 9, 2016

Now offering the smallest, highest CV, lowest ESR polymer capacitors in the industry, the F38 Series is ideal for demanding microminiature hybrid circuits a variety of commercial handheld wearable electronics FOUNTAIN INN, S.C. – AVX Corporation, a leading manufacturer of passive components and interconnect... Read More

Products in the News

V-Cone Tumble Blenders

February 9, 2016

Hauppauge, NY – Charles Ross and Son Company has added 5-, 10- and 25-cu.ft. V-Cone Tumble Blenders to its inventory of stock mixing equipment ready for immediate purchase or short-term trial/rental. Ideal for intimate dry blending of free flowing solids, Ross V-Cone Tumble Blenders or simply V-Blenders, are rated... Read More

Products in the News

Foreverbolt® Sets New Standard for Stainless Steel Fasteners

February 8, 2016

Company to display innovative NL-19® treated products at Grainger Show Feb 08 - 12th. SIGNAL HILL, Calif. - Over 15 years in the making, NL-19 is Foreverbolt's proprietary lab-tested treatment that modifies the surface of stainless steel products, producing a brighter finish, increased strength, and superior... Read More

Products in the News

3D Systems to Demonstrate Full Range of Advanced Manufacturing Solutions at Pacific Design & Manufacturing 2016

February 8, 2016

Showcasing comprehensive portfolio of 3D printing materials, on-demand parts services and healthcare solutions Expert additive manufacturing facilities certified for healthcare, automotive and aerospace applications ROCK HILL, S.C. - 3D Systems (NYSE:DDD) announced today that it will bring its full range of... Read More

Products in the News

New Video: Movie Theater Snack Cleaning Challenge

February 8, 2016

Ever wonder how movie theaters manage to pick up all the snacks, candy and popcorn left on the floor? This new video shows how the Nilfisk S3 vacuum collects every piece of various dry, sticky movie theater favorites through a 100 foot long hose. The S3 single-phase vacuum offers 50 or 100 liter capacities and... Read More

Products in the News

Block Scientific Offering Competitively Priced New and Recertified Electrolyte Analyzers from Medica

February 8, 2016

A leading supplier of laboratory equipment based in New York, Block Scientific offers a wide range of high quality analyzers from top manufacturers. The line includes new and recertified electrolyte analyzers from industry leader Medica, all of which are competitively priced. Medica electrolyte analyzers provide... Read More

Products in the News

DESTACO to Display Latest in Lightweight Workholding Solutions at AeroDef

February 8, 2016

Designed specifically for aerospace applications, DESTACO offers a variety of customizable tools to help boost operational productivity. Auburn Hills, Mich. – DESTACO, the industry’s leading, global provider of high-performance automation and workholding solutions, today announced its customized aerospace solutions... Read More

Products in the News

Mazak Northeast Event to Highlight Innovations for Enhancing Productivity

February 8, 2016

FLORENCE, Ky., – Mazak will host its seventh annual Discover More With Mazak™ event at its Northeast Technology Center in Windsor Locks, Connecticut, May 3 – 4 from 9 a.m. to 6 p.m. (EST). This technology and education event will feature the largest presentation of Mazak CNC machine tools in the region, as well as... Read More