Products in the News
Industry-Leading Thomson PC Series Electromechanical Linear Actuators Now Available with Factory Integrated Servo MotorsMarch 24, 2017
03.14.2017, WOOD DALE, IL – Thomson Industries, Inc., a leading manufacturer of electromechanical motion control solutions, is now offering users of its industry leading PC Series precision linear actuators an optional, pre-mounted and pre-tested servo motor. Bundling linear actuators with servo motors simplifies ordering, reduces the need for additional validation after installation,... Read More
DANBURY, Conn. (March 21, 2017) - A new generation of linear low-density polyethylene (LLDPE) packaging based on Addivant’s nonylphenol-free stabilizer WESTON® 705 has successfully hit consumer shelves, bringing a new level of safety, performance, and efficiency in food packaging across the U.S., Europe, and Asia.
With the arrival of these new commercial packaging applications, the... Read More
(Pawcatuck, Conn.) – The installation of a new 6-inch (150mm) Davis-Standard extruder and strategic line upgrades have enabled Mid South Extrusion of Monroe, Louisiana, to improve throughputs while delivering a broader slate of HDPE procession options. The modernizations were made to an existing Davis-Standard blown film line that has been in continuous operation for nearly 30 years. Mid... Read More
A portable pipe beveling tool for preparing torched-off or rough cut pipe ends and making them perfectly square in order to help create high-integrity welded pipe joints is available from Esco Tool of Holliston, Massachusetts.
The Terminator MILLHOG® Pipe Beveling Tool attaches to the I.D. and features a tracker which compensates for variations in the pipe’s wall thickness to... Read More
http://www.sti-usa.comMarch 21, 2017 – Do the students and general public in your area have March Madness fever? If so, make sure the clocks, bells, exit signs, and more in your gymnasium are protected from flying basketballs.
Constructed of 9-gauge tough steel wire with white or red corrosion resistant polyester coating, these guards offer great... Read More
If you need custom manufactured military cable assemblies and wire harnesses, check with Aved Electronics, Inc. of North Billerica, MA.
They are an ITAR registered SBVO (Small Business Veteran Owned) company.
Aved Military Cable Assemblies are custom manufactured using MIL-Spec wire, cable, boots, transitions, tubing, contacts, terminals, connectors back-shells, and adapters.... Read More
Minnesota Twins Install Eaton’s Advanced LED Lighting and Controls System at Target Field for the 2017 SeasonMarch 24, 2017
SYRACUSE, N.Y. - Power management company Eaton today announced that its advanced Ephesus sports lighting light-emitting diode (LED) and controls system is being installed at Target Field, home of the Minnesota Twins, for the 2017 season. Featuring industry-leading control functions, the LED system enhances the viewing experience for spectators while reducing energy use by as much as 75... Read More
Flanged shaft mounting collars that combine secure clamping with specially machined features such as attachment points, cam surfaces, O-ring grooves, slots, and more are available from Stafford Manufacturing Corp. of Wilmington, Massachusetts.
Stafford Flanged Shaft Collars are one-piece shaft mount solutions that can be manufactured from a variety of materials with custom configured... Read More
"Certified under the UL 410 Standard for Slip Resistance of Floor Surface Materials, verifying that the products help prevent slip and fall accidents
Laval, QC, Canada - March 21, 2017 - Five of Avmor's most popular floorcare products now have something else to tout.
They have just been certified under the UL 410 Standard for Slip Resistance of Floor Surface Materials,... Read More
Savannah, GA, March 20, 2017 – Ross Engineering’s ASME tanks are custom built to serve a wide range of applications and processing requirements in virtually any industry. The pictured 5,000-gal stainless steel tank is designed for full vacuum up to 10 psig internal pressure at 200oF in accordance with ASME Code Section VIII, Division 1 latest edition. It includes various size flange... Read More
Sennheiser to Exhibit “Sennheiser for Business” Portfolio of Headsets and Audio Conferencing Solutions at Enterprise ConnectMarch 24, 2017
Sennheiser will showcase its high-performance audio solutions at booth #832 March 27-30, including a unique new conferencing solution
Old Lyme, CT, March 20, 2017 – Sennheiser, a leading provider of premium audio solutions for businesses, announces it will demonstrate its portfolio of premium quality headsets and audio conferencing solutions at the Enterprise Connect conference, March... Read More
Bridgeport Solution Enables Midwest Contractor to Meet Demanding Chedule in Completion of Large-Scale Building RenovationMarch 24, 2017
Electrical contractor takes advantage of Bridgeport’s new Mighty-Merge® multi-port transition couplings for major project
STRATFORD, Conn. (March 20, 2017) – If timing is everything, then for a Midwest electrical contractor the timing could not have been better. The contractor was awarded a fast-paced rewiring job of a major automotive design facility and office building just after... Read More
BELLEFONTE, PA - February 24, 2017 The revolutionary new deactivation technology used for every Topaz GC inlet liner delivers unbelievably low breakdown for accurate and precise low-level GC analyses. Unbeatable manufacturing controls and a battery of industry-specific QC testing ensure that every lot exhibits superior reliability and reproducibility across a broad range of compound classes.... Read More
Secure corrugated displays on square-edge fixtures with the new Power Wing ClipT for Square Edge from FFR Merchandising.
Increase cross-merchandising selling opportunities-use the Power Wing ClipT to hold temporary displays on wood fixtures, shelving, and most square-edged fixtures up to 0.94" thick. The clip holds up to 5/16" corrugated, and measures 1" L x 2-4/5" H.
Constructed... Read More
WINONA, MN, USA - (March 21, 2107) - RTP Company, a leading global compounder of custom engineered thermoplastics, has developed Laser-Markable Compounds, a series of thermoplastic compounds formulated specifically for allowing high contrast marks and images to be added to an application via laser processing. A variety of polymers, including clear substrates, can be compounded to optimize... Read More
WIN Series Thin Film Chip Resistors Provide Reliability and Stability for Precision and Signal Conditioning ApplicationsMarch 24, 2017
The WIN series thin film chip resistors use an advanced metal film technology to provide extremely high levels of reliability and stability for precision and signal conditioning applications.
The WIN series resistor features a Water Insoluble Nitride film to resist the moisture vulnerability problems of nichrome and passivated nichrome resistor film technologies. Before WIN, this has... Read More
Compact and Rugged, Phantom VEO Offers the Ultimate in Size, Speed and Resolution for a Wide Range of Scientific and Industrial Applications
WAYNE, NJ, July 12, 2016 - Vision Research, a leading manufacturer of digital high‑speed imaging systems, today added further depth to its high-speed camera lineup with the debut of its new Phantom VEO® product family. Designed for a wide-range... Read More
Pearl Technologies to Showcase New Enhanced Safety Products at Converters Expo
Innovative design improvements create safer working environment in high volume production lines
Savannah, New York - March 20, 2017 - Pearl Technologies today announced that it is showcasing several new packaging products at this year's Converters Expo aimed at increasing converter line safety. The... Read More
Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) - Multi-Conveyor - Winneconne, WI - Multi-Conveyor recently built a mild steel constructed belt product turner conveyor system to transport shrink wrapped flats of jars. This unique, cost-effective dual lane conveyor belt turns products by simply adjusting the speeds of the side-by-side... Read More
The electronic content of devices for medical applications continues to rise steadily as medical science develops new techniques and electronic engineering supplies new solutions. At the same time, these devices are leaving the confines of hospitals and serving the growing community-based and home-based healthcare markets.
Much of the development is based on the increasing computing... Read More