Epoxy Adhesive offers temperature resistance up to 350°F.
November 14, 2012 -
Offering tensile shear strength of 4,560 psi, Aremco-Bond™ 2300 consists of 100% solids epoxy mixed in ratio of 10 parts resin to 1 part hardener by weight. Mixed viscosity is 5,000 cP and pot life for 100 g mass is approximately 45 min. Milky-clear product provides resistance to acids, alkalis, organic fluids, and salts. Supplied in pint, quart, and gallon kits, adhesive is suited for bonding engineered thermoplastics, ceramic wear tiles, and sheet molding compounds.
Original Press release
Aremco Products, Inc.
707 Executive Blvd., Unit
Valley Cottage, NY, 10989
Aremco-Bond 2300 Ultra High Strength Adhesive Now Available
Valley Cottage, NY
Aremco-Bond™ 2300, a new ultra high strength, low viscosity, high temperature epoxy adhesive produced by Aremco Products, Inc., is now available for demanding applications that require a tensile shear strength to 4,560 psi and/or operating temperature to 350°F (175°C).
Aremco-Bond 2300 is a two-part, milky-clear, ultra high strength, low viscosity, epoxy adhesive used in demanding applications requiring ultra high bond strengths up to 4,560 psi and temperature resistance to 350°F (175°C). This adhesive provides an exceptional combination of high shear and peel strengths and excellent impact and vibration resistance.
Additional properties include a high flexural strength of 13,500 psi, volume resistivity of 1.0 x 1015, dielectric strength of 380 volts/mil, and dielectric constant of 3.5 at 1 kHz. Exceptional chemical resistance to acids, alkalis, organic fluids, and salts, is also provided.
Aremco-Bond 2300 is a 100% solids epoxy that is mixed in a ratio of 10 parts resin to 1 part hardener by weight. Mixed viscosity is 5,000 centipoise (cP) and the pot life for a 100 gram mass is approximately 45 minutes. Recommended cure is 2 hours at 150°F or 48 hours at room temperature. Cured product exhibits a linear shrinkage of .003 in/in and Shore-D hardness of 85.
Some of the many applications for Aremco-Bond 2300 include the bonding of engineered thermoplastics, ceramic wear tiles and sheet molding compounds used in aerospace and automotive applications. Aremco-Bond 2300 is supplied from stock in easy to mix pint, quart and gallon kits.
Please contact Aremco's Technical Sales Department for more information about this advanced product.
AREMCO PRODUCTS, INC.
P.O. Box 517, 707-B Executive Blvd.
Valley Cottage, NY 10989
Contact: Peter Schwartz
TEL: (845) 268-0039
FAX: (845) 268-0041