ThomasNet News Logo

Inboard Diesel Engines target marine commercial applications.

August 27, 2010 - Suitable for patrol boats in high-speed operations, 700 hp Model D13-700 MC provides max torque of 1,896 lbf-ft at 1,200 rpm, while 800 hp Model D13-800 MC delivers max torque of 2,166 lbf-ft at 800 rpm. Both 4-stroke, direct-injected turbocharged diesel engines feature charge air cooler, 6 in-line cylinders, and 779.7 in.³ displacement. EMS 2 engine control system regulates fuel injection and monitors engine conditions, while quick-shift reverse gear provides fast but soft shifting.
Original Press release

Volvo Penta Of The Americas, Inc.
1300 Volvo Penta Dr.
Chesapeake, VA, 23320
USA


New Volvo Penta D13 Marine Commercial: More Power with Lower Emissions and Less Fuel


Volvo Penta is introducing the D13, a new inboard marine diesel for marine commercial applications. The D13 is available in 700 hp and 800 hp versions and delivers impressive performance with low fuel consumption and minimal exhaust emissions. It is suitable for fast patrol boats in high speed operations as well as for high-performance work boats requiring low life-cycle costs.

Massive low-end torque

One feature of Volvo Penta's inboard diesels is their high torque from low rpm, a prerequisite for rapid and safe acceleration. The new D13 is equipped with Volvo Penta's highly efficient twin-entry turbo with pulse charging - the power in each exhaust pulse provides the pulse pressure. The D13-800 features dual-stage turbo technology which helps produce a torque of over 2900 Nm even at 800 rpm. This gives superb acceleration with virtually no sign of smoke.

Another important feature is that the D13 retains a very high torque throughout its speed range. This makes it possible to maintain good operating speed even with a heavily loaded boat or in rough seas.

Low fuel consumption, minimum emissions

EMS 2, the engine control system developed by Volvo, regulates fuel injection and monitors engine conditions. The system controls the unit injectors, one per cylinder, which operate at a pressure of as much as 2000 bar and atomize the fuel for optimum combustion. The result of this efficient combustion is lower fuel consumption for the D13 than the previous model, at the same power output.

The D13 is also very low on noxious emissions and particulates. All versions are certified to the IMO NOx Tier 2, EU IWW, and US EPA Tier 2 requirements. They also meet the upcoming US EPA Tier 3 emission regulations - the world's most stringent.

Quick shift and low speed

The D13 is available with quick-shift reverse gear that provides very fast but soft shifting with a minimum delay. The reverse gear also comes with a low-speed function as standard, which means that the speed when idling drops by 50%. Low-speed mode is available as an option for all reverse gears.

High quality

The D13-800 and D13-700 have the same robust basic architecture as the Volvo D9, D11, and D16 inline-6 diesel engine platform. The platform features a robust block design, wet liners, rear-end transmission, ladder frame and a single cylinder head with overhead camshaft operating 4 valves per cylinder and the injectors. This contributes to smooth running, high reliability and long-term durability.

New generation onboard electronics

EVC-D, a new generation of the proven Electronic Vessel Control, offers new and useful features. The new series of controls are ergonomically designed and allow for maneuvering with fingertip precision in any situation. Integrated pushbuttons give easy access to functions such as low-speed mode, cruise control and single-lever mode, which allows safe and easy handling. Engine synchronization is standard in twin installations. The helm station can be completed with Volvo Penta gauges and displays, including the new 7" color display. Trip computer function for accurate fuel management and minimized environmental impact is also available.

Ease of service and maintenance

The EVC system features a self-diagnostic function, which indicates at the helm if a failure should occur. The engine has a compact and clean design, with all fluid filters plus seawater pump positioned at the port rear end, which makes it easy to service and maintain.

Type-approved

The engines and the control system are type-approved by DNV (Det Norske Veritas) for High Speed and Light Craft.


Technical Data D13-700 MC
Engine designation............................. D13-700

No. of cylinders and configuration...............in-line 6

Method of operation...........................4-stroke, direct-injected, turbocharged diesel engine with charge air cooler

Bore/stroke, mm (in.)............................131/158 (5.16/6.22)

Displacement, l (in3)............................12.78 (779.7)

Compression ratio................................16.5:1

Dry weight bobtail, kg (lb)......................1450 (3197)

Crankshaft power, kW (hp) @ 2300 rpm ............ 515 (700)

Max. torque, Nm (lbf.ft) @ 1200 rpm...............2570 (1896)

Rating.............................................3


Technical Data D13-800 MC

Engine designation................................D13-800

No. of cylinders and configuration............ in-line 6

Method of operation...............................4-stroke, direct-injected, turbocharged diesel engine with charge air cooler

Bore/stroke, mm (in.).............................131/158 (5.16/6.22)

Displacement, l (in3).............................12.78 (779.7)

Compression ratio.................................16.5:1

Dry weight bobtail, kg (lb).......................1560 (3439)

Crankshaft power, kW (hp) @ 2300 rpm .............588 (800)

Max. torque, Nm (lbf.ft) @ 800 rpm................2936 (2166)

Rating.............................................4

For further information, please contact Åke Edman, AB Volvo Penta, phone: +46 (0) 31 3225190, E-mail: ake.edman@volvo.com
Brought to you by Thomasnet.com

News provided by ThomasNet News® (TNN). TNN is a comprehensive source of new and timely product information in the industrial marketplace. TNN supplies new product information to the web sites, e-marketplaces and print publications that serve the industrial marketplace.

Copyright © 2014 Thomas Publishing Company