ThomasNet Industrial Newsroom -

Air Powered Vacuum Pumps feature low air consumption.

info@productnews.com (ThomasNet News) — Tue, 24 Nov 2009 08:33:56 -0500

Mitey-AirVac(TM) Miniature Vacuum Stations include venturi, internal check valve which maintains vacuum in case of power loss, switches, and gauge. Featuring symmetrical mounting hole locations, they have an aluminum case, weigh 2 lb, and pull 26 in. Hg vacuum with 1.27 scfm air consumption. MTY-1 measures 3.31 x 3.66 x 4.11 in. and MTY-2 is 3.31 x 6.41 x 4.11 in. with flow rates from 0.74-4.4 scfm. Vacuum Stations use standard ¼ in. push-connect fittings.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Chemical Processing and Waste Management

Search for suppliers of: Air Pumps | Industrial Pumps | Laboratory Pumps | Miniature Vacuum Pumps

Misting Pump suits portable and stationary applications.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 10:28:26 -0500

Available in .13, .25, and .50 gpm configurations with pressures up to 1,000 psi to accommodate variety of nozzles, Model 1CX can be fitted with ¼ or ½ hp single phase motor. Pump features 4-position head mounting, industrial stacked valves, forged brass manifold, and ceramic plungers. Compact brass pressure regulator offers precision pressure setting and over pressure protection. Typical applications include evaporative cooling, insect control, dust suppression, and greenhouse misting.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Pressure Pumps | Mist/Fog Pumps | High Pressure Pumps | Industrial Pumps

Solids Handling Pump has clean-in-place design.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 08:27:10 -0500

Based on NDP Series, pump features flap valve design that allows for passage of up to 2 in. solids. Vented diaphragm chambers alleviate problems associated with trapped air/gas, while top suction/bottom discharge design prevents solids from settling in pump. In addition to non-lubricated air-valve, features include bolted construction, outside-accessible air valve, and modular pilot-valve design. Also, short stroke technology provides extended diaphragm life.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Solids Handling Pumps

Variable Displacement Truck Pump lowers heat, fuel consumption.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 08:27:00 -0500

Rated for continuous operation at pressures to 6,090 psi, 95 cc/rev VP1-095 suits mobile applications where power and precise control of multiple functions is required. IT can be mounted directly to truck PTO and supplies hydraulic system with precise amount of oil required to improve performance and control. Variable flow capability (up to 52 gpm) reduces heat generation, possibly eliminating need for oil cooler, while 11-piston design minimizes noise and pulsation levels.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Variable Displacement Pumps | Oil Pumps

Vacuum Pump targets scientific and industrial communities.

info@productnews.com (ThomasNet News) — Fri, 13 Nov 2009 08:31:36 -0500

Suited for scanning electron microscopes and laboratory equipment requiring clean vacuum system, oil-free Hush Pump(TM) offers vibration dampening while alleviating routine maintenance and contamination. Scroll pump also eliminates potential leakage as well as smells and fumes from typical oil pumps. Providing 60 lpm capacity, Hush Pump is suited for mass spectrometers, vacuum degassing, freeze drying, cryogenics, vacuum distillations, and vacuum ovens.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Chemical Processing and Waste Management

Search for suppliers of: Dry, Oilless & Oil-Free Vacuum Pumps | Laboratory Pumps | Scroll Vacuum Pumps

Pipeline Pump has galvanized fuel tank and protection cage.

info@productnews.com (ThomasNet News) — Tue, 10 Nov 2009 08:33:51 -0500

Fully automatic, 6 in. HD6 pipeline pump can produce flows past 2,700 gpm, heads to 65 ft, and is able to pass 3 in. solids. Galvanized, 70 gal fuel tank never rusts, and needs fueling once per day. Self contained galvanized drag skids hold liquids that may drip from radiator, fuel tank, or engine, keeping surrounding environment clean.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: All-Purpose & General Purpose Pumps | Pipe Line Pumps | Liquid Pumps

Air-Driven Pumps operate at pressures up to 60,000 psi.

info@productnews.com (ThomasNet News) — Mon, 09 Nov 2009 08:39:40 -0500

Air-driven, positive-displacement, high-pressure liquid pumps in ASL Series are available in variety of drive ratios and include both single and double air-drive designs. Manual options are available for ACHL Series pumps, while AHL Series double-acting, double air-drive pumps offer high flow and high pressure. All are pressure maintained without energy consumption and require no lubrication. External spool valve simplifies maintenance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Positive Displacement Pumps | High Pressure Pumps | Air Operated Pumps

Compact ANSI Centrifugal Pump is customizable.

info@productnews.com (ThomasNet News) — Fri, 06 Nov 2009 08:43:12 -0500

Designed for space constrained applications, Model 811CC is customizable with heavy-duty stocked ductile iron, stainless steel, and CD4MCu materials of construction, along with variety of seal options. Close-coupled electric motor eiminates need for coupling alignment and oil-level monitoring. Impeller can handle corrosive and erosive fluids and is keyed with features o-ring seal. Replaceable shaft sleeve and adapters allow for easy replacement of mechanical seal and packing.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Centrifugal ANSI Pumps | Custom Pumps | Electric Pumps

Pneumatic Hand Pumps range up to 600 psi.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:42 -0500

Combining pressure and vacuum generation, PHP Series features spring loaded stroke adjustment, scissor action, and fine adjustment vernier. Handheld units include Model PHP 2 with pressure range up to 30 psi, Models PHP 10/25 with pressure ranges up to 150/350 psi, and Models PHP 35/40 with pressures ranges to 500/600 psi. All include 3/8 in. BSP (F) connection to fit master indicators.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Hand Pumps | Pneumatic Pumps

ANSI Centrifugal Pumps offer range of seal options.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:38 -0500

Intended for fluid handling applications, 811 Series is available with broad selection of seals that can accommodate most any fluid and temperatures up to 500°F. Oversized seal chambers provide optimal seal environment for heat dissipation, solids, entrapped air, and vapor. Radial clearances between mechanical seal and seal chamber wall maximize circulation of liquid to and from seal faces. Standard, large, and tapered bore style chambers are available.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Liquid Pumps | Centrifugal Pumps | Centrifugal ANSI Pumps

Pneumatic Hand Pump combines ergonomics, functionality.

info@productnews.com (ThomasNet News) — Tue, 03 Nov 2009 08:38:35 -0500

Comprised of models specified for pressure ranges to 30, 150, 350, 500, or 600 psi, Pneumatic PHP Hand Pump Series combines pressure and vacuum generation functionality with spring-loaded, grip-able handle and scissor action. Fine adjustment vernier and pressure release are also included, and connections to fit master indicators are 3/8 in. BSP (F). In addition to cases for pumps, adapters, and hose, options include set of BSP/NPT adaptors.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Pneumatic Pumps | Hand Pumps

Console Water Source Heat Pumps exceed efficiency standard.

info@productnews.com (ThomasNet News) — Thu, 22 Oct 2009 08:41:15 -0500

Designed for in-room installation, Enfinity(TM) Pumps exceed ASHRAE 90.1 efficiency standard to minimize energy consumption and are selectable for standard, boiler/tower, or geothermal applications. Pumps use R-410A refrigerant, which has zero ozone-depletion potential and no phase-out date. Offered in low-sill or high-sill design, pumps are equipped with MicroTech® III unit controller and GentleFlo(TM) cross-tangential fan wheel, which delivers max airflow required for proper air circulation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC
Green & Clean

Search for suppliers of: Water Pumps | Heat Pumps

Swing-Piston Pumps are suited for handling air or inert gas.

info@productnews.com (ThomasNet News) — Wed, 21 Oct 2009 08:44:47 -0500

Including compact 3.3 Lpm micro pump and 25 Lpm mid-size version, both with vacuum or pressure capabilities, swing-piston pumps can transfer, evacuate, or compress air or inert gas, while delivering oil-free performance without any potential risk of contamination. Sealing lip between cylinder and wall minimizes frictional loss and ensures minimal vibration. Suited for wide range of OEM applications, pumps can operate in any position and can be customized to meet specific requirements.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Micro Pumps | OEM Pumps | Piston Pumps | Transfer Pumps | Air Pumps | Gas Pumps

Waterjet Intensifier Pump supports orifices up to 0.021 in.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:06 -0500

Capable of producing 2.0 gpm of ultra-high pressure, iP60-100, 100 hp, 60,000 psi pump suits precision waterjet cutting, water blasting, cleaning, and surface preparation applications. It features tie-rod design with no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder. Product features matched-metal components to prevent galling of hydraulic system components, and dual intensifiers for increased operating performance.

This story is related to the following:
Machinery and Machining Tools
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Waterjetting Equipment | Ultra High Pressure Pumps | Waterjet Intensifier Pumps

Three-Screw Crude Oil Pump survives harsh conditions.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:14 -0500

As rotary positive displacement pump with constant and nonpulsating flow, Imo® 8L-912Y helps accommodate movement of heavy crude from onshore and offshore oilfields to downstream operations. It accommodates up to 24 in. dia pipelines and can transport over 85,000 barrels of oil per day at pressures to 2,000 lb/in.². Hydraulic nature provides volumetric and overall operating efficiencies, and performance can be controlled via variable-speed drive to dial in required flow rate.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Rotary Pumps | Positive Displacement Pumps | Pipe Line Pumps | Oil Pumps

Liquid Diaphragm Pump offers bubble-free operation.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:46 -0500

Featuring REFLEX valve technology, 1210 Series is suited for fuel cell, inkjet, and diagnostic applications. Unit features max flow of 180 ml/min, max pressure of 80 m H<sub>2</sub>O, and max vacuum of 6 m H<sub>2</sub>O. Available in 12 and 24 V DC models, compact pump measures just 2.0 x 0.9 x 1.4 in. and is able to handle mixture of air and liquid.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Liquid Pumps | Diaphragm Pumps | Air Pumps

Syringe Pumps come in standard- or high-force versions.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:53 -0500

Offered with variety of syringe racks to meet specific application needs, PHD 22/2000 Advanced Syringe Pumps are available in infusion-only, infusion/withdrawal, or programmable pumping options. Programmable pump can store up to 4 programs of 10 sequences each.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Syringe Pumps | Laboratory Pumps | Precision Pumps

Piston Pumps optimize hydraulic fan drive systems.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:05 -0500

Optimized for open-circuit applications, 18 and 28 cc P1/PD Series piston pumps enhance hydraulic fan drive system performance, which can subsequently help reduce fuel consumption and emissions output for off-highway vehicles. Each variable, axial piston pump is engineered for continuous operation at temperatures and pressures (280 bar max) in emissions-compliant diesels. Suited for medium-duty mobile (P1) and industrial (PD) applications, pumps are available with several control options.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Green & Clean

Search for suppliers of: Piston Pumps | Axial Flow Pumps

Bulk Bag Eductor loosens and discharges bulk solid material.

info@productnews.com (ThomasNet News) — Wed, 07 Oct 2009 08:41:07 -0500

Designed to loosen bulk solid material that has solidified during storage and shipment, Bulk Bag Weigh Batch Eductor System discharges material by weight and blends it into liquid stream. Skid-mounted system incorporates 2 Bulk Bag Unloading Frames, each with integral Bulk Bag Conditioner comprised of hydraulic pump and 2 rams with contoured end plates that press opposing sides of bulk bags. Cantilevered hoists and motorized trolleys allow conditioning of bulk bags at various heights.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Materials and Material Processing
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Bulk Handling Equipment | Mixing Eductors | Solids Conveying Eductors

Vacuum Generators feature multi-stage design.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:27 -0500

Measuring 7/8 x 1 7/8 x 6 ½ in., MFL Series is capable of vacuum flow up to 19.5 scfm and vacuum levels up to 27.2 in. Hg. Compressed air flows through small venturi nozzle and expands into first chamber to generate vacuum. Combination of compressed air and vacuum flow then flows through second and third venturi to also produce vacuum. Pumps are suited for pick and place applications, with vacuum cups for material handling where sealing is difficult and leakage is common due to uneven surfaces.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Vacuum Generators | Vacuum Pumps