ThomasNet Industrial Newsroom -

Natural Gas Booster includes uninterruptible power supply.

info@productnews.com (ThomasNet News) — Tue, 10 Nov 2009 08:33:46 -0500

Suited for facilities that provide critical services, GasCube(TM) boosts pressure for boilers, HVAC, hot water heaters, and manufacturing process equipment. Pre-wired, pre-piped skid package can boost utility street-pressure levels by as much as 83 in. WC with volumes to 240,000 cfh. UPS provides instant protection from momentary power interruption and can be relied on to power equipment during longer term outages until auxiliary power supply can be turned on.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Booster helps fine-tune control valves.

info@productnews.com (ThomasNet News) — Tue, 30 Jun 2009 08:35:01 -0500

Featuring precisely manufactured bypass restriction, booster can be adjusted exactly and lead-sealed in that set-up, eliminating trial and error procedures of fine tuning control valves. It is completely pressure balanced and provides stable output, even under fluctuating pressure conditions. When used in combination with positioner, booster allows control valves with large pneumatic actuators to be controlled precisely in applications with high flow rates or significant pressure drops.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Valve Controls | Boosters

Gas Charging System is designed for portability.

info@productnews.com (ThomasNet News) — Wed, 17 Jun 2009 08:30:05 -0500

Transportable gas bottle mounted charging system hooks on to gas bottle to boost gas (nitrogen, inert gases, oxygen) to 4,350 psig max. One source drives and feeds booster system, which accepts inlet pressures to 3,000 psi. Solution includes adjustable 1,450-4,350 psig automatic shut-off, CGA connection, and hose. It is engineered to provide compact, portable high-pressure gas solutions to industries such as oil and gas or heavy equipment maintenance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Air Flow Amplifiers can clean, cool, or dry parts.

info@productnews.com (ThomasNet News) — Wed, 18 Mar 2009 08:35:21 -0500

Operating on Coanda effect, airflow amplifiers provide up to 40:1 ratio of ambient air to compressed air to generate high vacuum flow and high exhaust flow. In-field adjustability lets operators set airflow, velocity, force, and direction for specific application while minimizing air consumption. Made of anodized aluminum, products have no moving parts and require no electricity. There are 9 standard models, from 1/8-2.0 in. ID, with vacuum flows from 4-330 scfm.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Amplifiers

Hermetically Sealed Gas Booster is UL-listed.

info@productnews.com (ThomasNet News) — Fri, 06 Mar 2009 08:29:37 -0500

Featuring customizable outlet positioning, external motor wiring, and sliding tank housing, ETTER Natural Gas Booster (ENGB) is capable of volumes in excess of 120,000 ICFH, and static gains in excess of 41 in. WC. Cool Flow Technology(TM) maximizes cooling effects of gas stream by providing axial, 360° flow of natural gas focused directly on motor.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Natural Gas Booster Skid offers maximized performance.

info@productnews.com (ThomasNet News) — Wed, 04 Feb 2009 08:33:34 -0500

GasCube(TM) series hermetic natural gas booster skid package boosts utility street-pressure levels by up to 83 in. wc with volumes to 240,000 cfh. Measuring 36 x 50 x 76 in. on 20, 21, and 24 series, UL-listed device includes PLC control panel, with operator interface terminal, contained in NEMA 4 cabinet. Combination starter and main disconnect switch/circuit breaker protect motor and recirculation valve control is included on systems requiring lower operating flows than specified rated flow.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Oxygen Booster recharges rebreather size tanks.

info@productnews.com (ThomasNet News) — Mon, 03 Nov 2008 07:37:00 -0500

Driven by hand or compressed air, Maximator ROB22 features finned gas barrel for efficient gas cooling. Portable unit is available as standalone booster or as complete kit installed in Pelican case for transport. Additional options include air control package consisting of filter, regulator with gauge, shut-off valve, and required fittings, as well as Hand Lever option for manual operation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Compressor Boosters

Adjustable Air Amplifiers cool, dry, vent, and exhaust.

info@productnews.com (ThomasNet News) — Tue, 19 Aug 2008 07:42:55 -0500

Constructed of aluminum or stainless steel, 3 in. Adjustable Air Amplifiers utilize Coanda effect to produce outlet flows up to 24 times compressed air consumed. When set to .002 in. air gap supplied at 80 psig, outlet flow is 2,323 scfm when measured 6 in. from outlet. Vacuum and discharge end can be ducted using standard hose or tube. Applications include cooling hot parts, exhausting smoke and fumes, distributing heat in ovens or molds, and drying components.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Amplifiers

Gas Boosters meet MIL STD 1330D for oxygen cleaning.

info@productnews.com (ThomasNet News) — Thu, 07 Aug 2008 07:46:55 -0500

With -50 ratio, air-driven AG Series satisfies emerging requirements for greater gas flow than -30 ratio units operating at max capacity. Boosters provide outlet pressures up to 15,000 psi with built-in cooling, and require no electricity or air line lubrication. With assured separation between air drive and gas booster sections, units are hydrocarbon free. Standard and custom models are available in single stage-single acting, single stage-double acting, and 2-stage models.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Air Amplifier System suits chemical and manufacturing plants.

info@productnews.com (ThomasNet News) — Mon, 02 Jun 2008 07:43:30 -0500

Measuring 53 x 36 x 24 in., Air Amplifier System consists of two GPLV2 air amplifiers, 30 gal vertical receiver tank, control box with timer device, on/off switch, power cord, and fuse. Timer operates each amplifier for short time, then automatically switches to second amplifier. System is suited for applications in chemical, manufacturing, and injection molding plants.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Amplifiers

Air Amplifier doubles line pressure at point of use.

info@productnews.com (ThomasNet News) — Tue, 18 Jul 2006 08:06:11 -0500

Offering flow rates up to 29 scfm, Air Amp(TM) AA-160 can achieve pneumatic pressures from 100-300 psi with 60-150 psi air drive pressure. Unit features aerospace PTFE-based dynamic seals and aircraft quality aluminum components. It is suited for demanding applications where pneumatic line pressure at point of use is inadequate or where greater force is required in air cylinder or actuator than line pressure can provide.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Compressor Boosters | Air Operated Pumps

High Flow Volume Booster delivers throttling control.

info@productnews.com (ThomasNet News) — Mon, 10 Oct 2005 07:11:49 -0500

Offered in aluminum or 316 SS, Type 6000 provides 1-to-1 signal-to-output relay, that when used with positioner/actuator, increases stroking speed of control valves. Integral bypass valve provides system stability while allowing normal positioner airflow and normal valve actuation with small input changes. Max signal pressure of 150 psig to volume booster provides output pressure up to 150 psig with flow capacity of 115 scfm. Temperature limits are -40 to 160°F.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Hydraulic Boosters

Electric Driven Gas Boosters operate contamination-free.

info@productnews.com (ThomasNet News) — Fri, 16 Sep 2005 05:32:59 -0500

EDA Series eliminates oil migration in applications using all inert gases. Design includes separation and only requires cleaning in order to use it for oxygen service. With inlet pressure from 750-2,600 psi, products provide max outlet pressure of 5,000 psi. Dual-stage configuration permits higher gas flow rates with inlet pressures as low as 450 psi. Able to start under load, products feature 1.5 hp electric motor as standard, pressure gauges, and variable pressure setting controls.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Booster Systems suit aircraft ground support applications

info@productnews.com (ThomasNet News) — Mon, 04 Nov 2002 07:49:17 -0500

Available in 1- and 2-stage models, portable nitrogen booster systems include automatic stop feature (activated when gas supply pressure drops to minimum inlet rating). Turnkey systems can be operated by one person. Designed to operate from one gas source, regulator with gauge operates boosters' drive sections at pressures to 145 psi. Single stage models are for use in nitrogen charging to 3,000 psi; 2-stage models are for use in charging to 6,000 psi.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Gas Boosters

Oxygen Booster suits ground support applications.

info@productnews.com (ThomasNet News) — Wed, 10 Jul 2002 09:05:36 -0500

Lubrication-free Oxygen Booster System has automatic controls for unattended operation and may be set for pre-selected outlet pressure to 5,000 psi. No electrical connection is required. Oxygen chamber is sealed and vented for hydrocarbon-free operation. Booster features high-pressure safety relief, isolation and vent valves, and stainless steel tubing and fittings.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Operated Pumps | Gas Boosters | Boosters

Air Booster doubles pressure for pneumatic applications.

info@productnews.com (ThomasNet News) — Mon, 24 Jun 2002 07:37:41 -0500

DPA air-to-air booster employs dual piston technology and has no oil or liquid to contaminate operating area. It accepts shop air and generates increase at output. Unit comes in 63 and 100 mm bore sizes and can be operated without air lubrication system, however filtered air supply (5 microns) is required. Input pressure is 2 to 8 bar and 2 to 10 bar, respectively. Size 63 mm will produce up to 16 bar output for 10 bar input at 625 Nl/min.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Boosters | Air Compressor Boosters

Air Booster Systems feature automatic controls.

info@productnews.com (ThomasNet News) — Tue, 28 May 2002 07:59:02 -0500

Mini breathing air booster systems produce output pressures to 4,500 psi and are suitable for applications that utilize multi-stage mechanical compressor with purification and storage cylinders. They are oil-free and require no lubrication. Max systems are designed for fire departments that utilize pure air in 2,200 psi cylinders. Select systems allow pump-down of supply cylinder to 150 psi, as output is boosted to 5,000 psi.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Compressor Boosters | Boosters

Booster Cylinder remedies under-powered actuators..

info@productnews.com (ThomasNet News) — Wed, 01 May 2002 11:33:12 -0500

Compact Air-to-Air Booster operates on air pressure alone to amplify input pressure 2:1. Outlet air pressure up to 250 psi is possible. Applications include fixtures and tooling that have already been designed, but it is later determined that actuators are providing insufficient force. Booster can be installed to amplify input pressure and supply required power. Units have hard-coat anodized, PTFE-impregnated components for corrosion and wear resistance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Air Cylinders | Air Compressor Boosters

Adjustable Air Amplifier can pick and place porous parts.

info@productnews.com (ThomasNet News) — Mon, 15 Apr 2002 09:08:44 -0500

CDF Series combination vacuum pump and cup generates high vacuum flow suitable for picking up light, porous objects such as open celled foam, fabric, fibrous paper products, and stenciled or screen printed circuit boards. It operates on Coanda Effect, where small volume of compressed air is converted into large flow of ambient air. Amplifiers are available in 7 standard models with internal bores from 1/8 to 2 in., and vacuum flows from 6 to 350 scfm.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Vacuum Pumps | Air Amplifiers