ThomasNet Industrial Newsroom -

Snap-In Pleated Bag features integral venturi.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Sep 2008 07:37:53 -0500

Utilizing moisture-resistant, spunbond polyester media for 99.9% efficiency, Mikro-Pleat V-Series incorporates full diameter venturi that is pressed into filter element's flexible head and bonded in place. Shape of venturi helps capture pulses from blow pipe nozzles that are worn or not perfectly aligned. During normal filter operation, venturi smoothes air flow, which minimizes pressure drop arcross orifice.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pleated Filters | Baghouse Filters | Bag Filters | Filter Bags | Venturis

Pinless Syphon Elbow suits steam-heated rotating cylinders.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Aug 2008 07:44:50 -0500

Featuring integral locking mechanism that secures elbow into position, 45° Syphon Elbow is intended for installation on blind rolls or rolls with hand hole access. All components of elbow are constructed of stainless steel to provide corrosion-resistance. In addition, 45° angle results in less cantilever weight compared to long bent syphon pipe, causing less stress on horizontal syphon pipe thread connection.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Syphons | Pipe Elbows

Vortex Shedding Flowmeters feature 316 SS construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:42 -0500

Providing ±2% full-scale accuracy and ±.25% repeatability of indicated flow, CoolPoint(TM) flowmeters offer corrosion resistance in processing cooling water, water/glycol coolant, or low-viscosity fluids. Vortex shedding electronic flowmeters are available in ¾, 1, 1½, and 2 in. pipe sizes with maximum 4-20 mA transmitter flow rates of 25, 50, 100, and 200 gpm, respectively. Units feature PVDF sensors, Viton® fluoroelastomer seals, and flow totalizer.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Stainless Steel Flowmeters | Flow Measurement Systems | Vortex Shedding Flowmeters | Water Flowmeters | Flow Monitors

Stainless Steel Press-In Orifice restricts flow of gases.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:42 -0500

Designed for installation into plastics in medical applications, Model 303 IMH press-in stainless steel orifice ensures that every part is within ±5% of its nominal flow rate. Entrance and exit conditions of miniature flow restrictor are closely controlled. Measuring 2.5 mm, orifice features barbed design that provides press-in installation, ensures retention, and prevents any bypass leakage around unit.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Health, Medical and Dental Supplies and Equipment

Search for suppliers of: Gas Orifices | Restriction Orifices | Medical Flow Restrictors

Laboratory Faucet is available for 1-2 in. water loop.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:38 -0500

Designed to dispense clean water at point of use, Type 530 AquaTap(TM) Recirculating Laboratory Faucet features flow through head design that eliminates dead-legs and optimizes flow characteristics. Inline Flow Diverter (IFD) technology provides flow rate of up to 5 gpm with not more than 1.5 psi pressure drop. Faucet is available in SYGEF® PVDF, while accessory products, including IFD, are available in both SYGEF® PVDF and PROGEF® natural polypropylene.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Laboratory Faucets

Sink Strainer has built-in magnets to catch stirring bars.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:32 -0500

Spinbar Magnetic Sink Strainer has 4 magnets in each corner that keep Spinbar Magnetic Stirring Bars from going down drain and long slits in sides and skirt that allow fluids to drain rapidly. Available in blue or green, chemical resistant unit has flat edge on one side that allows it to be placed close to sink wall. Four legs anchor strainer in sink drain and prevent it from being dislodged by flowing liquid.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Laboratory and Research Supplies and Equipment

Search for suppliers of: Sink Strainers | Laboratory Equipment & Supplies

Vent Exhaust Arrestor safely neutralizes chlorine.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:28 -0500

To help keep buildings free from chlorine-related acid corrosion, Capital Controls® Type VEGA(TM) treats occasional chlorine gas vent releases that normally accompany chlorine container changeovers. Disposable chlorinator vacuum regular vent gas arrestor is 5 gal HDPE disposable container of chemically impregnated media, which reacts on contact to convert chlorine to harmless landfill-disposable salt. It eliminates combustion concerns and does not need neutralization prior to disposal.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Materials and Material Processing

Search for suppliers of: Neutralizing Chemicals | Chlorine Gas Control Equipment

Vent Box helps minimize chance of clothes dryer fires.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Apr 2008 07:37:43 -0500

Providing recessed space for dryer vent connection, UL classified DBX1000M Metal Dryer Vent Box minimizes possibility of kinks in hose, which contribute to lint buildup. Unit also protects gas line connection and valve within cavity of wall. Constructed of 22-gauge steel, box meets UL 1-hr fire-rated wall assembly requirements when applied with 3M fire protective wrap. Product is suited for multi- and single-family construction, where laundry room wall has narrow framing requirements.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Dryer Vents

Faucet Spout features internal antimicrobial treatment.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Apr 2008 07:36:14 -0500

Spouts, treated internally with SANIGUARD® antimicrobial technology and listed by National Sanitation Foundation (NSF) International under Standard 61, Section 9 for use with potable water, are available on Encore® faucets. Internal diameter is coated with inorganic, silver ion antimicrobial to reduce bio-fouling by inhibiting growth of bacteria as well as odor-causing molds and fungi. Spouts can also be retrofitted to other existing Encore plumbing fixtures.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Spouts | Faucets

Door Alarm offers 95 or 105 dB sound intensity.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Apr 2008 07:45:08 -0500

Including 6 models, Exit Stopper alerts if any protected door is opened by emitting ear piercing alarm for 30 sec, 3 minutes, or continuously as preset by users. In annunciator mode, it announces door entry with set of 10 beeps. STI-6400 is original multifunction door alarm, STI-6402 is designed for double door installation, STI-6404 suits double door with remote horn, and STI-6406 allows for dual access control. STI-6403 has remote horn, while STI-6405 has always active feature.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Safety and Security Equipment

Search for suppliers of: Stoppers | Door Alarms

Shim Block suits production machinery and related fixtures.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:33:14 -0500

Available in 2 sizes with metric or inch screws and washers, DBM Shim T-Block is used to adjust locating details and other components on fixtures, tooling, and machinery. Unit's slotted hole and oversize mounting holes in movable component allow adjustment in 2 directions when using 2 or more blocks. Compact shim block requires only 1 reamed hole and 1 tapped hole per shim block, and comes complete with socket head cap screw, washer, and 4-piece shim pack.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Shim Blocks

Steam Dispersion Panel helps prevent condensation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Feb 2008 07:41:08 -0500

Designed with series of dispersion tubes spaced to provide short non-wetting distance, ExpressPack accepts atmospheric source steam and discharges it into duct or air handling unit. Shorter non-wetting distance helps prevent condensation on downstream obstructions, optimizing performance of atmospheric source humidifier. Dispersing dry and uniform amount of steam, ExpressPack is suited for HVAC, institutions, and food processing applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Humidifying Equipment | Steam Diffusers

Noise Muffler works with drill rigs.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jan 2008 07:33:35 -0500

Designed for Sandvik DX type drill rigs, NoiseGuard muffler system has suppression capacity of 10 dB (A), reducing noise levels of site and its surroundings. In addition, system lowers cabin noise levels by 8 dB (A). Muffler system consists of plastic hood that weighs 450 kg, and thin perforated aluminum insulation plates that stay in place even in heavy vibration, efficiently block echoes, and do not absorb moisture.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Safety and Security Equipment

Search for suppliers of: Noise Suppressors | Noise Mufflers

Controllers and Transmitters suit oil and gas operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:45 -0500

Featuring green label and green Bourdon tube, Fisher® C1 pneumatic controller can help decrease amount of pressurized air or natural gas lost to atmosphere. Proportional band adjustment assembly replaces 3-way valve, enhancing both control and safety. Materials are available for applications handling sour process fluids. Available models include proportional only, proportional-plus-reset, differential gap, and transmitter.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Transmitters | Gas Controls | Pneumatic Controllers

Vent Filter is 0.2 µm rated.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Dec 2007 07:44:27 -0500

Designed for low volume venting and also usable for gas and solvent filtration, Ultradyne® 50 filter is made of PTFE and is available in 50 mm size with stepped hose barb inlet/outlet. It can be used to filter up to one liter of solvent or solvent-based liquids and can be pre-wet with alcohol to filter aqueous liquids. For sterile applications, filter can be safely autoclaved up to 30 times. Unit is suitable for laboratory and research applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Laboratory and Research Supplies and Equipment

Search for suppliers of: Liquid Filters | Gas Filters | Laboratory Filters | Vents

Filtered Inlets and Outlets are IEC 60320 class I-rated.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:15 -0500

IEC 60320 Filtered inlets and outlets have ratings from 6-20 A and either 120 or 250 Vac. They feature robust screw mount, nickel-plated shielded enclosure, 0.250 in. quick disconnect terminals, and general purpose filter or medical, low leakage current filter. With UL recognition and CSA/VDE approvals, RoHS-compliant devices are intended for computer, medical, general purpose, and/or custom indoor type equipment applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Inlets & Outlets

Air Flow Measuring Instrument if offered as complete kit.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:09 -0500

Available in start kit that enables immediate measuring, VPFlowScope provides users with all-in-one device for measuring compressed air systems. Product measures mass flow, temperature, and pressure simultaneously, displaying all 3 parameters in real-time on bright blue LCD display. Device also has built-in data logger capable of storing 500,000 data points. Kit also includes measurement software, power supply, and English manual.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Compressed Air Monitors | Air Flowmeters

Filter/Silencer fits all stationary engine sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Jun 2007 07:45:02 -0500

Incorporating CARB-verified PERMIT filter, PERMIT Filter/Silencer cuts exhaust emissions from prime power and emergency generators. Unit is installed on exhaust of generator, eliminating visible black smoke, diesel odor, and noise while engine is running. Manufactured using 304 stainless steel, filter/silencer is corrosion-resistant and fully insulated to minimize heat loss and provide sound attenuation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Exhaust Filters | Engine Silencers

Mufflers provide noise reduction up to 35 dBA.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Jun 2007 07:46:17 -0500

Available in 1/8-1 in. NPT sizes, Reclassifying Mufflers help companies meet EU noise directive (86/188/EEC) and OSHA standard 29 CFR-1910.95 for safe noise levels below 90 dBA. They can be installed directly into exhaust port of cylinders, valves, and other air powered equipment to reduce work area noise and harmful oil mist. Wrap design of removable element removes oil mist contamination of worker's breathing air, keeping exposure below 4.32 ppm.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Safety and Security Equipment

Search for suppliers of: Air Exhaust Mufflers & Silencers | Industrial Noise Control Materials | Noise Mufflers

Rupture Panel ensures bucket elevators operate safely.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 May 2007 07:48:25 -0500

Lift-Gard provides venting and rupture notification to guard against damage caused by explosions in bucket elevators transporting powder and bulk solids. Made of stainless steel, flat venting system combines integral frame and Flo-Tel(TM) detection device in one unit. If Flo-Tel(TM) detects initial explosion inside elevator shaft, it automatically switches off elevator motors to reduce risk of further explosion and stop elevator operation with open explosion vents.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Plant Furnishings and Accessories

Search for suppliers of: Explosion Vents | Explosion Relief Doors