ThomasNet Industrial Newsroom -

Spay Nozzles are suited for pulp and paper industry.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 08:02:08 -0500

Designed for high-pressure trimming applications in pulp and paper industry, BEX WT series nozzles feature wear resistant synthetic ruby insert. They produce steady laminar stream of liquid at up to 2,000 psi of pressure. Adjustable Teflon® shield protects orifice from loose strands of fiber (produced by high-pressure trimming action) that could otherwise plug orifice.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Spray Nozzles | High & Low Pressure Nozzles | Paper & Pulp Nozzles

Water Jet Nozzle removes pipe build-up in one pass.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 07:59:27 -0500

Able to clear blocked pipes of up to 12 in. dia in single pass, RPN2420 has 5 high-cohesive, sapphire nozzles positioned for peak efficiency, 1 in front and 4 on sides. Rotation is variable from 50-500 rpm with full speed control, and nozzle operates at pressures up to 20,000 psi with flow up to 20 gpm. Featuring precision machined stainless steel body, 3 lb self-propelling, field-repairable nozzle clears blockages horizontally, vertically, and in tight elbows.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pipe Nozzles | Stainless Steel Nozzles | Waterjet Nozzles

Nozzles dispense liquids in micro to nanoliter volume ranges.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:38:19 -0500

Micro-Dispense Nozzles provide method of controlling dispensed volumes when used in conjunction with Lee VHS (Very High Speed) Micro-Dispense Valves. Designed for applications where volume of liquid to be dispensed is in microliter to nanoliter range, units are available in 062 MINSTAC threaded ends and straight tube mounting configurations for system design flexibility.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Liquid Dispensing Nozzles | Industrial Nozzles

Rotating Nozzle meets FDA requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 May 2008 07:40:07 -0500

Suited for washing and rinsing applications, all-Teflon® rotating nozzle provides 360º spray coverage in compact assembly. A total of 5 spray patterns are available in 4 different pipe sizes for use at operating pressures up to 100 psi. Snap-on cap holds nozzle ball securely in place without threads or fasteners. Effective in containers up to 10 ft in dia, unit features self-cleaning and self-lubricating bearing mechanism.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Tank Washing Nozzles | Rotary Nozzles | Spray Nozzles

Hand Shower is resistant to bacteria growth.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:54:44 -0500

SaniShower(TM) Spray Head and Hose, designed for use in hospitals and other residential care facilities, feature SANIGUARD® antimicrobial technology, which retards growth of bacteria and odor-causing molds and mildews on treated surfaces and meets NSF Protocol P345 for antimicrobial efficacy. Able to retrofit to most existing hand showers, product provides gentle spray pattern suited for use in burn wards and has 2.0 gpm water consumption rate.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Showers

Safety Air Guns are OSHA 1910.242(b) compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:25 -0500

Available in sizes ranging from 6-72 in., Lazer(TM) Series 600 and 650 Safety Air Guns feature aircraft aluminum extension with OSHA compliant venturi nozzle and comfort-grip trigger for smooth actuation. Guns fit in any size hand and are suited for extended reach industrial cleaning applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Guns

Safety Air Gun cleans out blind holes in work pieces.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Mar 2008 07:36:49 -0500

Offered in 6, 12, and 18 in. lengths, OSHA-compliant Model 74BH safely removes chips, liquid, and debris from blind holes in metal, wood, or plastic. Gun sends focused jet of air through brass extension tube, which is tipped with plastic stylus making it safe for threaded holes. Secondary 360° cone of air is simultaneously emitted from special Air Shield nozzle, protecting workers from dangerous chip fly-back.

This story is related to the following:
Portable Tools
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Blow Air Guns | Air Guns

Nozzles and Gasless Parts optimize welding performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Mar 2008 07:35:33 -0500

Designed for heavy equipment manufacturing operations, Heavy-Duty Centerfire(TM) Nozzles feature removable nozzle cone, built-in spatter guard, and heat-resistant insulating material that withstands degradation at 400-600 A. For companies that use same power source for MIG and self-shielded welding, Gasless Centerfire parts allow operators to convert Q-Gun from one process to another. Both nozzles and gasless parts operate with standard Centerfire contact tips and diffusers.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Welding Equipment and Supplies

Search for suppliers of: Welding Nozzles | Welding Accessories & Supplies

Air Nozzle delivers precision blowoff in tight spaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Feb 2008 07:51:10 -0500

Measuring 0.78 in. long x 0.25 in. dia, Nano Super Air Nozzle(TM) Model 1110SS features Type 316 SS construction suitable for blowoff, cooling, and drying applications. Unit provides narrowly focused air pattern that measures 1.5 in. dia when positioned 6 in. away from target surface. Blowing force of 8.1 oz is achieved with air consumption of 8.3 scfm at 80 psig. Since airflow cannot be blocked, nozzle meets OSHA standard for dead-end pressure.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Nozzles

Hot Runner Nozzles come in 28 different sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Feb 2008 07:51:04 -0500

Available in lengths up to 250 mm, Value Shot Z202 Series includes tips made of molybdenum alloy, which offer thermal conductivity as well as abrasion resistance, and enable processing of filled molding compounds and engineering plastics. Nozzle tips made of CuCoBe are suitable for gating onto sub-runners or for direct gating with sprue. Also made of molybdenum alloy, open nozzle tips allow design of needle valve solutions with cylindrical gates.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Plastic Injection Molding Machine Nozzles

Valve Nozzles have interchangeable thermocouple and heater.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Feb 2008 07:25:22 -0500

Designed for medical and packaging market, Valve Shot line of hot runner nozzles feature front sealing diameter of 10 mm, body diameter of 16.5 mm, and length of 80-140 mm to support small cavity centers. They come with gate bubble geometry to meet industry requirement of color change capability. Suited for processing polyolefin and styrene in weight range of 5-25 g, units are supplied as standard in combination with pneumatic needle valves Z10750.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Cavitating Nozzles

Dispensing Tip precisely deposits thick assembly fluids.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:55 -0500

Designed for use with air-powered dispensing equipment, 27 gauge tapered dispensing tip makes it possible to apply accurate amounts of silicones, epoxies, lubricants, and other thick assembly fluids. Silicone-free solution is molded from clear polyethylene, which will not scratch delicate surfaces, and has tapered design that promotes flow. SafetyLok(TM) threads provide safe, secure attachment, while tip produces consistent dots and lines as small 0.008 in. wide.

This story is related to the following:
Mechanical Components and Assemblies
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Tips | Liquid Dispensing Nozzles

Nitrogen Air Gun features one-piece construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jan 2008 07:52:17 -0500

Constructed with wetted parts of PFA, PTFE, and polyethylene, Model No. 421-42-1 Nitrogen Spray Air Nozzle is supplied with .5 micron PTFE membrane filter in cap/nozzle area. Hand-held unit is designed to promote operator comfort during extended use, and nitrogen cap/nozzle prevents pressure build up if outlet is blocked. Along with 75 PSIG max pressure, features include ¼ in. FNPT connection and 3/16 in. orifice.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Guns

Flat Air Nozzle provides adjustable force.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Dec 2007 07:30:11 -0500

Available in zinc aluminum alloy or Type 316 SS, High Power Super Air Nozzle produces flat 2 in. wide airstream with blowing force of 2.2 lb when mounted 12 in. from target. Air is released through .025 in. gap opening that is set with stainless steel shim positioned between body and removable cap. Force and flow may be adjusted by installing different shim thicknesses. Consuming 37 scfm at 80 psig, nozzle produces 83 dBA, which is below OSHA noise limits.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Stainless Steel Nozzles | Air Nozzles | Flat Spray Nozzles

Pipe Cleaning Nozzle enables use of larger jets.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Dec 2007 07:49:13 -0500

Used in combination with 2 trucks at either end of pipes 15 in. and larger, Orca(TM) Dual Operating Sewer Nozzle is specified with 4 jets for one end of hose and 4 for other end. It uses manifold and conduit system so that each jet has individual tube to carry water, resulting in minimized turbulence in sewer nozzle head as well as optimized stream distance. Nozzle features stainless steal construction throughout and allows companies to utilize current trucks.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pipe Nozzles | Cleaning & Lubricating Nozzles | Stainless Steel Nozzles

Safety Air Gun provides force of 13 oz to 3.3 lb.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Nov 2007 07:43:20 -0500

Featuring cast aluminum body and ergonomic composite rubber grip, Heavy Duty Safety Air Gun safely removes chips, dust, and other contaminants from products, machinery, and work surfaces. Unit uses 3/8 NPT compressed air inlet to maximize airflow available to Super Air Nozzle. Airflow cannot be blocked, which complies with OSHA standards. Providing reach for areas not easily accessible, aluminum extension pipes are available in lengths up to 72 in.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Guns

Suction Kit cleans sediment from hot water heaters.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 Nov 2007 07:42:52 -0500

Designed for electric hot water heaters only, Sediment Suction Kit has 2 nozzles with adapter that fits both. Nozzles are inserted into bottom heater element port, while shop vacuum is hooked up to adapter to suck out sediment. Kit cleans up to 24 in. diameter tanks.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Suction Dredge Nozzles | Hose Suction Kits

Clean Air Atomizing Nozzle features 2 gas ports.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Nov 2007 07:41:10 -0500

Available with tips that provide flat V, solid stream, and full cone spray patterns, Air Atomizing Spray Nozzle uses 1 port for gas to atomize sprayed liquid and another for gas that drives cylinder, preventing contamination from cylinder lubricants. Unit can spray from ½-70 gal of fluid per hour. It can spray atomized liquid or liquid itself, continuously or in pulses. Each nozzle can be changed by itself, without interfering with operation of other nozzles.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Spray Atomizing Nozzles | Air Atomizing Nozzles

Air Dryer resists corrosion and high temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Oct 2007 07:50:06 -0500

Featuring split design that can be clamped around continuously moving material such as pipe, hose, cable, wire, and extruded shapes, stainless steel Super Air Wipe(TM) produces 360° airstream that can blow off, dry, clean, or cool material passing through center. Air velocity can be varied with instant on/off control, and additional shims can be installed if more blowoff force is required. Areas of use include food, chemical, and pharmaceutical applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Cleaning Products and Equipment
HVAC
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Air Jets | Air Blast Equipment

Plastic Spray Nozzles provide uniform distribution.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 28 Aug 2007 07:43:17 -0500

Constructed of Kynar® or polypropylene, FullJet® Nozzles offer chemical and corrosion resistance. Internal vane helps produce even, uniform full cone spray pattern and ensures complete and consistent coverage. Suited for cleaning and rinsing, nozzles offer capacities from 2.4-26.0 gpm and spray angles of 70, 90, and 120°. Compact design facilitates mounting and installation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Spray Nozzles | Corrosion Resistant Nozzles