ThomasNet Industrial Newsroom -

Valves are available with single-/multi-station manifolds.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:33 -0500

Electronic Oxygen Clean series is available with single- and multi-station manifolds, which offer single- or double-sided mounting in oxygen-compatible electroless nickel-plated brass material and feature 1/8 in. NPT input ports as well as No. 10-32 outlets. Consuming 0.67 W, pneumatic Oxygen series has response time of 5-10 msec and ratings of 6, 12, or 24 Vdc. Available in 1-12 station versions, manifolds facilitate grouping of valves, fittings, or other pneumatic components.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pneumatic Valves | Electrically Operated Valves | Manifold Valves | Valve Manifolds

Manifolds accommodate both 3- and 4-way valves.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:18 -0500

Available in 2, 4, 6, 8, or 12 station lengths, 410M Series accommodates 310/410 Series inline pneumatic valves. Units contain one common media supply port, one common vent/exhaust port, and isolator plugs that permit isolation of galleys for separation of pressure, media, or exhaust. Other accessories include manifold station block-off plates, separate air supply plate, electrical sockets, valve mounting kit, DIN rail clips, and separate 12-station control board.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Manifolds install for in-line use.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Dec 2007 07:44:19 -0500

Constructed of aluminum, in-line manifolds are designed with bottom T-slot that allows for accelerated and secure installation. Products are available in 4-, 6-, 8- or 10-station versions. Design provides access for grouping valves, fittings, or other pneumatic components.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Motor Mount Manifolds target mobile machinery.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Sep 2007 07:47:23 -0500

Designed to fit LSHT motors, Hydraulic Integrated Circuits provide commonly needed functions, including counterbalance, cross-port relief, bypass solenoid, and dual shock valve with anti-cavitation. Off-the-shelf HICs are appropriate for swing drives, winch drives, and slew drives, as well as vehicle propulsion, auger drives, conveyor drives, and on/off fan applications. All units are endurance tested to NFPA standards.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Hydraulic Manifolds

Double-Block-and-Bleed Manifold operates up to 15,000 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Sep 2007 08:17:12 -0500

Featuring 3/8 in. bore, Hi-Pro integrates 2 ball valves for isolation and 1 needle valve for venting. Unit is supplied with MPI tubing ends that operate using compression sealing technique and are inherently vibration resistant. End connections are secured by means of Tru-Loc mechanism to guard against connector movement when disconnecting connectors or instrument. Valves are integrated within 316 SS one-piece body, minimizing potential leak paths.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Cube Manifold comes with 6 mm wide 3-port valves.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jul 2007 07:43:37 -0500

Combining valve, PCB, base, and fittings, Series VV061- CUBE Manifold can be used to operate small bore cylinders or as pilot valve for air-operated valves. It comes in 4- and 8-station configurations with barb fitting to accept 4 mm OD tubing or with 2 mm one-touch fitting. With voltage options of 24 and 12 Vdc, Series V060 valve offers response time of 10 ms and consumes 0.55 W in standard configuration and 0.23 W with power saving circuit.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Manifolds meet ISO 15848 standard for fugitive emissions.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Jun 2007 07:44:57 -0500

Available in double-block-and-bleed configurations, Instrumentation Manifolds come in either monoflange or low-profile flange-ended forms. Both feature integrated construction that minimizes potential number of leak paths. Ball and needle valve designs used in manifolds meet highest A classification level specified by ISO 15848 over temperature range of -29 to +180°C. With flange sizes from ½-3 in., manifolds are offered in numerous valve/flow path configurations.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Switchover Manifold controls compressed specialty gases.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Apr 2007 07:36:39 -0500

Designed to control gas delivery from 2 independent banks of high-pressure cylinders, Model 8404E ensures continuous, uninterrupted supply of gas without manually resetting levers or valves. Integrated circuit electronically monitors and displays cylinder bank pressure as well as delivery of pressure. Available with brass or stainless steel regulators, programmable unit allows delivery pressure to be set from 10-225 psig, with max flow rate of 1,200 scfh.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Flow Control Manifolds | Gas Cylinder Manifolds

Plug-In Pneumatic Valves have integrated AS-i connection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Mar 2007 07:47:03 -0500

Suited for AS-i serial link applications, 2-station Series CA44 valves are offered with manifold choices with or without digital inputs and with or without auxiliary power. Design simultaneously makes both electrical and pneumatic connections when plugging valve into place. Valve stations can be 4-way, 2-position valves; dual 3-way, 2-position valves; or blanking plate. Service life is over 100 million cycles, and flow is 0.2 Cv, with pressure range of 29-116 psi.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Two-Way, Three-Way & Four-Way Valves | Pneumatic Valves | Valve Manifolds

Accumulator Manifold targets pilot circuit applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Feb 2007 07:02:58 -0500

Integrated Accumulator Manifold (IAM) design integrates piston-type accumulator directly into aluminum manifold, making manifold itself an accumulator. Approach effectively incorporates accumulator, pilot circuit, and switching valve circuit into compact, fully integrated unit. IAM design can accommodate up to 1,000 psi operating pressure and features up to 20 cu in. displacement. It is suited for use on front-end loaders, backhoes, skid steers, aerial and man lifts.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Hydraulic Manifolds | Piston Type Accumulators

Solids-Liquid Injection Manifold is CIP/SIP capable.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Nov 2006 07:59:21 -0500

With SS surface and mirror finish on interior wetted components, SLIM (solids-liquid injection manifold) system uses vacuum force at intake area to suck in powders or liquids for immediate emulsification/dispersion. Mounted on casters, system includes 1¾ gal funnel for powder charging, along with sanitary connections, double mechanical seal, and seal barrier system. Applications include fumed silica, calcium carbonate, titanium dioxide, thickeners, and pigments.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Materials and Material Processing
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Equipment & Supplies | Manifolds | Dispersing Equipment | Emulsifying Equipment | Laboratory Mixers

Valve Manifolds are Ethernet-enabled.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Aug 2006 08:32:46 -0500

Featuring plug and work® design, CPX I/O System consists of modular, IP65 valve manifolds with Ethernet/IP, Modbus TCP, and standard IT protocols. Embedded controller enables decentralized or stand-alone control. Complete diagnostics, via LED, network, or handheld, provide error detection. Featuring up to 32 solenoids, VTSA manifold offers flow rate up to 1,000 l/min per valve, while MPA manifold features up to 128 solenoids and flow rate of 700 l/min per valve.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Filter Manifold suits harsh powder processing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 Jun 2006 08:08:13 -0500

ValvePAC(TM) provides intelligent pulse jet filter cleaning as well as valve diagnostics for reducing pulse jet baghouse and cartridge style dust collector maintenance. Operating as standalone device or networked to B-PAC(TM) control systems for overall performance analysis and optimized control, ValvePACs are available in modular packages to handle small filters with 16 rows or less and large multi-compartment fabric filters with 240 rows or more.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Special Manifolds

Valve Manifold Assembly suits car care applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Apr 2006 08:06:27 -0500

Supplied with ready-to-install fittings, direct-acting manifold contains 2-way, NC valves with common inlet port and individual outlet ports. Metering options permit chemical dispensing or slow closure of valves to remove water hammer effects within water lines. Available in brass and 303 stainless steel, manifold is manufactured with ¼ in. NPT connections and offers 120/60 Class F IP67 AC DIN coil. Assemblies are available with 2, 3, 4, or 6 stations.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Gas Manifold System allows for uninterrupted gas flow.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 24 Mar 2006 07:05:02 -0500

Available for 15, 40, or 125 psi outlet pressures, Gas Manifold and Automatic Changeover Regulator System features chrome-plated 2.5 in. gauges that enable visual inspection of cylinder bank and outlet pressures. Nickel-plated changeover regulator includes 2 inlet, 1 interstage, and 1 outlet pressure gauge. Pigtail assemblies made of SS and Teflon are offered in 24 and 72 in. lengths, and manifold header bars feature brazed joints for leak-proof connections.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Gas Manifolds

Fluoropolymer Manifold is made to application requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 22 Feb 2006 07:07:37 -0500

Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can include SMT valves, pumps, sensors, fittings, and other components.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Custom Manifolds

Modular Valve Terminal mounts up to 16 valves, 32 coils.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Oct 2005 07:05:21 -0500

Offering range of pneumatic connections, VTSA (Type 44) allows plug-in sub-base style valves to be added or removed as required; singlar sub-base for mounting individual valve is also available. Sub-bases are available in G or NPT ports, and terminal box, multipin, and fieldbus electrical interfaces can drive 32 solenoids. Along with 24 Vdc and 100 Vac coil voltage options, system lets user combine larger valves on single manifold without transition plate.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds | Pneumatic Manifold Valves

Modular Manifold offers infinite expanability.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Oct 2005 06:59:52 -0500

Micad Modular Manifold provides universal application for transferring fluids in and out of engines and tanks as well as through pumps. Intended for use by marine mechanics or those needing configurable fluids transfer device, product features infinite expandability. It is equipped with 2.5 x 3.5 in. dia port units and 1 x 3.5 in. dia end units. Connections are ½, ¾, and 1 in. NPT.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Manifolds

Pneumatic Valve Islands are compatible with distributed I/O.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Oct 2005 07:24:05 -0500

Featuring M23 19-pin connector, Series VS18/VS26 addresses CNOMO standard E03.62.530.N within European automotive industry. Metal connector is suitable for 24 Vdc and 115 Vac valve islands and multi-pole valve islands with M23 connector. Compatibility with FD67 fieldbus I/O system enables direct control of islands from FD67 nodes as part of distributed system. Sandwich plates with additional pressure port 1 allow individual pressure supply for one valve.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Manifolds

Acrylic Sub Plates simplify fluid system design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Aug 2005 08:59:08 -0500

KIP series facilitate design and installation of complex media flow requirements. Use of acrylic base permits flow of various media through single base using multiple inlets and outlets. For design flexibility, flow paths can be varied and directed to match specific design requirements.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Flow Control Manifolds