ThomasNet Industrial Newsroom -

Filter Media offers optimal dust holding capacity.

info@productnews.com (ThomasNet News) — Tue, 24 Nov 2009 08:33:51 -0500

Available in weights from 78-95 lb/3,000 ft², Capaceon(TM) Filter Media for automotive applications is treated with solvent-based phenolic resins, which provide smolder and water resistance in panel air filter designs and will not require post-pleating curing process. Treated with modified acrylic resin system that is pre-cured during manufacturing process, Capaceon(TM) Filter Media for heavy duty air use achieves high level of engine protection from contaminants in harsh environments.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC

Search for suppliers of: Filter Media | Automotive Air Filters

HVAC Filtration Media promotes efficient operation.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 08:26:59 -0500

Based on bi-component, nonwoven technology, Kimberly-Clark Filter Media suits HVAC filters delivering MERV 11-15 performance. Design optimizes initial and sustained particle capture efficiencies, which helps increase IAQ and keep HVAC components clean. Able to be used in various filter types, 100% synthetic media is thermally bonded to prevent fiber shedding during manufacture or use. Mix of fiber diameters in gradient density structure promotes particle capture efficiency.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC

Search for suppliers of: Air Filters | Non-Woven Filter Media | Filter Media

Filtration Media removes black powder from natural gas.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:25 -0500

Featuring select serial filtration technology, Gas Sentinel Filter Elements help eliminate troublesome solids and liquid carryover. Units feature proprietary pleat pack and extended surface area, providing optimal dirt-holding capability for capture of black powder, iron oxides, salts, oil, and liquid contaminants found in natural gas. Replacing conventional graded density elements, Gas Sentinel elements optimize solids handling while maintaining low differential pressure.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Media | Filter Elements

Molded Foot Valve Screens are suited for ball check valves.

info@productnews.com (ThomasNet News) — Mon, 14 Sep 2009 08:32:18 -0500

Designed for use when ball check valve is located in tank on suction side of pump, injected molded injection foot valve screens filter out larger debris before it can enter inside valve, pump, or process line. With no cemented joints or parts, units adapt to ball check valve using union nut. Screens are available in PVC, CPVC, PP, and PVDF, and in sizes ½ in. through 4 in. with flanged, socket, or threaded end connections.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Chemical Processing and Waste Management

Search for suppliers of: Filter Screens | Liquid Screens | Debris Filters | Pump Filters | Valve Filters

Dry-Scrubbing Media suits wastewater treatment applications.

info@productnews.com (ThomasNet News) — Wed, 12 Aug 2009 08:29:56 -0500

Designed for odor control, Odorcarb(TM) Ultra activated alumina media removes 0.30 g of hydrogen sulfide/cm³ of media. Product contains Media Life Indicator Pellets, which are blue in color but turn white after chemisorption to distinguish new media from spent media. Odorcarb Ultra is UL classified and landfill disposable.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Waste Handling Equipment

Search for suppliers of: Filter Media | Metallic Filter Media | Wastewater Filtration Media

Filter Cartridges utilize nanofiber technology.

info@productnews.com (ThomasNet News) — Tue, 21 Jul 2009 08:30:45 -0500

With ability to filter both through electro-adhesion and mechanical processes, Nano-Key(TM) filter cartridges feature ceramic nanofibers on micro-glass matrix, providing reduction of virus, bacteria, cysts, endotoxin and other submicron particles. They are available either as standard 2¾ in. dia single layer cartridges or multi-layered GIANT® 4½ in. dia cartidges. Filters come in standard or carbon version; carbon version removes humic compounds and reduces total organic compounds.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Cartridges | Water Filters

Cartridge Filters suit particulate water removal from oil.

info@productnews.com (ThomasNet News) — Thu, 16 Apr 2009 08:38:16 -0500

Available in 7 and 10 MZW spin-on style models, Excellement ZW Particulate Water Removal Media feature water holding capacities suited for mobile filtration systems and bulk transfer systems. Layers of cartridge element include epoxy-coated steel wire fabric, 2 layers of Z media, water removal media, and spun bounded scrim.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Media | Cartridge Filters | Hydraulic Filters | Oil Filters | Filter Elements

Support Grid fits any thin, low-profile air filter assembly.

info@productnews.com (ThomasNet News) — Tue, 17 Mar 2009 08:30:34 -0500

Featuring smooth surface for sliding in and out of equipment, Uni-Grid Support prevents filter media from sagging beyond frame, keeping media within overall filter assembly thickness profile, making it beneficial for applications where filter is installed near fan intake area. RoHS compliant unit meets standards and classifications including UL 94 HF-1, ATCA, UL 900 Class 2, CE, Telcordia, NEBS GR-78-CORE and GR-63-CORE, micro TCA, and ETSI.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Air Filter Media | Metal Supports | Filter Holders

Air Filter Media is biodegradable and compostable.

info@productnews.com (ThomasNet News) — Fri, 13 Mar 2009 08:30:21 -0500

Manufactured from polylactide (PLA), DelPore® meltblown media is engineered for short-term disposable air filtration applications such as medical facemasks, respirators, vacuum bags, and furnace filters. Biodegradable and compostable material exhibits enhanced efficiency when subject to electrostatic charging, making it suited for manufacturers concerned with sustainability, zero-toxicity, and low-energy initiatives. Charged and uncharged versions are available in various weights.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Green & Clean

Search for suppliers of: Air Filter Media

Mist Collectors clear air of oils and coolants.

info@productnews.com (ThomasNet News) — Fri, 13 Feb 2009 08:30:05 -0500

Dryflo collects mist generated by coolants and machining oils that pollute atmosphere and condense on surfaces. Combined with special outer wrap, and allowing gravity to aid drainage by sitting vertically inside collector, Dryflo prevens collected liquid from re-entering clean air stream. Differential pressure gauge indicates pressure drop correlating with filter exhaustion, while filter retention system enables rapid filter change and minimal human contact with collected oil.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Chemical Processing and Waste Management

Search for suppliers of: Filter Cartridges | Mist Eliminator Filters

Filter Cartridges offer optional -222 O-ring adapter.

info@productnews.com (ThomasNet News) — Fri, 23 Jan 2009 08:33:54 -0500

Available in lengths of 2.5 in. or 5 in., pleated SFE Small Flow Element filter cartridges are designed for point-of-use filtration and small batch processing of liquids and gases, where flow requirements are less than 3 gpm or 60 scfm. Wide range of media is available, with filtration ratings from 0.04 to 99 µm, including prefilters in glass and polypropylene microfiber, and membranes in PES, PVDF, polypropylene and PTFE.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Cartridges

Filter Elements target hydrostatic systems.

info@productnews.com (ThomasNet News) — Tue, 06 Jan 2009 08:35:52 -0500

Available in 6 and 9 in. sizes, Excellement® Z Media Elements are designed for GH HYDRASPIN filters used with hydrostatic systems. Units are tested under cyclic flow conditions to verify flow fatigue characteristics. For strength and rigidity, elements feature epoxy-coated steel wire fabric and support layers. Wide range of Z media elements enable user to achieve desired cleanliness level for system.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Elements

Thin Filter Media meets UL 94 HF-1 rating.

info@productnews.com (ThomasNet News) — Fri, 02 Jan 2009 08:40:51 -0500

Measuring 0.12 in. thick, Quadrafoam is intended for space-constrained applications where flame safety, dust arrestance, and sufficient airflow is critical. Soft and compressible, media is available in 45, 60, and 80 pores/in. In addition to filtration applications, Quadrafoam can also be bonded to interior chassis walls for insulation or circuit card stabilization purposes, and is suited for medical, power-gen, military electronics, and telecom applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Air Filter Media

Resin Bonded Filter Cartridges provide two-stage filtration.

info@productnews.com (ThomasNet News) — Fri, 12 Dec 2008 07:40:43 -0500

Available in sizes up to 40 in., Resflex(TM) Series features outer spiral wrap for removing large particles and agglomerates, while inner layers provide particle removal in ratings from 2-150 microns. Cartridges offer flow rates of 10 gpm/10 in. of cartridge length, and can handle fluid viscosities up to 15,000 SSU. Units can remove contaminants from viscous fluids such as adhesives, chemical coatings, petroleum products, paint, and printing ink at temperatures up to 250°F.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Cartridge Filters | Filter Cartridges

Membrane Filters are custom die-cut.

info@productnews.com (ThomasNet News) — Fri, 12 Dec 2008 07:40:37 -0500

Custom Die Cut Membranes are suited for filtering fluids and gases or venting in medical, pharmaceutical, life sciences, and laboratory equipment. They are manufactured from PTFE, nonwovens, and other materials, and can incorporate intricate shapes, including narrow cross sections and close hole spacing. Membranes are supplied on rolls, with or without adhesive backing, and can be produced from a dxf, pdf, or most any drawing file and material supplied or specified by customer.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Membrane Filters | PTFE Membranes

Liquid Cartridge Housings offer filtration up to 4,100 gpm.

info@productnews.com (ThomasNet News) — Tue, 18 Nov 2008 07:41:35 -0500

Available for flows starting at 120 gpm, Multi-Round Liquid Cartridge Housings offer 11-205 cartridge capacity and accept 20, 30, or 40 in. filter cartridges. They provide 150 psi pressure rating and accept double open-end cartridges or 222 style cartridges with closed top caps. In addition to carbon and stainless steel construction options, features include duplexing housing for continual flow during maintenance as well as other housings with different connection sizes/types.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Housings | Cartridge Filters

Replacement Filter Elements suit mining applications.

info@productnews.com (ThomasNet News) — Tue, 23 Sep 2008 07:25:35 -0500

Delivering last chance protection for existing valves on longwall shields, MSB Replacement Elements are constructed of stainless steel and available in various sizes/styles. All feature plasma welds as well as hex slot in cap that facilitates element removal. Media construction promotes minimal pressure drops across element and extended life cycle.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Elements

PTFE Candle Filter Bags suit wet filtration applications.

info@productnews.com (ThomasNet News) — Tue, 16 Sep 2008 07:45:19 -0500

Utilizing Micro-Inversion Filtration(TM) technology, PTFE Candle Filter Bags are manufactured from woven Mikrotex® filter media and are suited for harsh chemical environments. Bags release filter cake during back pulse wash cycle without membrane fracture due to inherent characteristics of filter media and design of sleeve. Longitudinal seam is reinforced and sewn with 2 types of stitching to form secure joint, while ends of bag are open with PTFE-corded drawstring hem.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Filter Bags

Non-Conductive Filter Frames offer quick-mount assembly.

info@productnews.com (ThomasNet News) — Tue, 16 Sep 2008 07:45:16 -0500

Expanding one-piece assembly unit - filter, mounting bracket, fan guard, and air flow plenum - eliminates need to specify multiple parts to serve same function. Air filter media can be installed without complex kits and procedures, and design can be made to match existing hole pattern or provide captive fasteners and adhesive tapes. While metal finishes provide corrosion protection, filters with Quadrafoam media provide protection against flammability, UV light, and fungus.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC

Search for suppliers of: Custom Air Filters | Filter Components

Snap-In Pleated Bag features integral venturi.

info@productnews.com (ThomasNet News) — Tue, 09 Sep 2008 07:37:53 -0500

Utilizing moisture-resistant, spunbond polyester media for 99.9% efficiency, Mikro-Pleat V-Series incorporates full diameter venturi that is pressed into filter element's flexible head and bonded in place. Shape of venturi helps capture pulses from blow pipe nozzles that are worn or not perfectly aligned. During normal filter operation, venturi smoothes air flow, which minimizes pressure drop arcross orifice.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Pleated Filters | Baghouse Filters | Bag Filters | Filter Bags | Venturis