ThomasNet Industrial Newsroom -

Tube Fittings aids in fluid handling applications.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:38:06 -0500

Featuring precise hose barbs and thread forms to ensure a secure fit, FitQuik(TM) Connectors are available in black and white nylon and animal-free, natural polypropylene. Fitting styles include luers, tube-to-tube, thread-to-tube, blood pressure fittings, and are offered with NPT and 10-32 threads.

This story is related to the following:
Mounting and Attaching Products
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Luer Fittings | Nylon Fittings | Tube To Tube Fittings | Medical Tube Fittings | Tube & Tubing Connectors | Barbed Fittings | Polypropylene Fittings | Quick Connect Fittings | Quick Disconnect Fittings

NPT Threaded Plugs have hex shaped head with slot.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:36:59 -0500

Available in multiple NPT thread sizes from ¼-1 in., NPT threaded plugs seal threaded openings to protect against contamination and moisture, and provide liquid tight seal up to 70 psi. Made of electrically nonconductive nylon 6/6, IP 68 rated units resist oil and heat up to 105°C. Suitable applications include in household appliances, pneumatic and hydraulic devices, industrial equipment, automotive products, motors, and generators.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Threaded Plugs | Corrosion Resistant Plugs | Sealing Plugs

Slip-On Fittings modify existing tubular pipe structures.

info@productnews.com (ThomasNet News) — Tue, 30 Jun 2009 08:35:02 -0500

Available in 2 sizes each to fit 1¼ and 1½ in. nominal pipe, EFA03G Short Tee fitting is designed to join upright and horizontal rail, while EFA40G Crossover fitting provides 90° offset crossover joint within structure. They are constructed of cast iron to BS EN 1562:1997 for strength and durability and are galvanized to BS EN ISO 1461:1999 for corrosion resistance. Fitting simplify installation, requiring only hex key to tighten stainless steel set screws.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Cast Iron Pipe Fittings | Corrosion Resistant Pipe Fittings | Slip-On Structural Pipe Fittings

Nylon Hose Clamps withstand -40° to 302°F temperatures.

info@productnews.com (ThomasNet News) — Mon, 22 Jun 2009 08:25:47 -0500

Suited for moderate non-hydraulic pressure applications, Kwik Clamp(TM) nylon hose clamps feature double row of durable teeth to ensure strong bond that will not vibrate loose. Made from U.L.-listed, black, nylon 6-6, they cannot corrode or rust and are light weight, non-conductive, and may be reused. Over 30 sizes are offered and range from ¼-4¼ in. nominal OD.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Tubing Clamps | Hose Fittings

Pre-Wired Valve Plug is vibration and shock resistant.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:53 -0500

IP65 sealed Junior Timer Valve Plug is designed for applications in mobile hydraulic sector, and features locking mechanism to save time during installation and maintenance. Available in 3 models: without suppression, with LED, and with LED and suppression, unit has operating voltage of 24 V and capacity of 4 A.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Valve Plugs

Dip Molded Round End Caps are made of flexible vinyl.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:32:05 -0500

Black dip molded vinyl caps, typically used to protect threaded or non-threaded tubing, rods, pipes, and fittings, are made from material flexible enough to stretch over larger dimensions without tearing, splitting, or shredding. Glossy finish lends to use as decorative end cap, and sizing starts as small as 0.078-8 in. in ½, 1, and 1½ in. lengths, with and without pull tab.

This story is related to the following:
Packaging Products & Equipment
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Vinyl Caps | Tube End Caps | Pipe Caps

Hole Plugs snap into hole with fingertip pressure.

info@productnews.com (ThomasNet News) — Wed, 29 Apr 2009 08:29:02 -0500

Designed to securely close off unneeded panel holes, PGM series hole plugs are available in 34 different sizes to accommodate wide variety of hole diameters and panel thicknesses. Product is RoHS compliant.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Packaging Products & Equipment

Search for suppliers of: Hole Plugs | Plastic Plugs

Instrumentation-Grade Tube Fittings are interchangeable.

info@productnews.com (ThomasNet News) — Wed, 08 Apr 2009 08:32:50 -0500

Double-ferrule instrumentation-grade fittings feature interchangeable nut and ferrule sets, which enables installer to use one tube fitting manufacturer's nut and ferrule sets within body of another manufacturer. They also have intermixable components that work with those of several other manufacturers. Each fitting is packaged in its own pouch and thread-protector to keep fitting clean from contaminants, and all packaging has traceable codes printed on box for reference.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Instrumentation Fittings | Tube Fittings

Fittings are designed for semirigid tubing.

info@productnews.com (ThomasNet News) — Fri, 27 Mar 2009 08:38:14 -0500

Premium Grade Hard-Line Series Fittings feature barbs molded without parting for optimized seal and suited for use with tubing such as Polyethylene 55 Shore D and Polypropylene 80 Durometer. Barb has sharp sealing point eliminating need for suck-down around trailing edge, with sizes fitting tubing IDs of 1/16, 1/8, 5/32, 3/16, and ¼ in. Designed for semirigid tubing, fittings are available in barbed connector and barbed tee design. They are available in various materials.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Tube Fittings

Seamless Pipe Nipples suit high-pressure applications.

info@productnews.com (ThomasNet News) — Fri, 27 Mar 2009 08:38:09 -0500

Ranging from 1/8-4 in. in diameter and up to 12 in. in length, Extra Heavy Black Seamless Pipe Nipples meet or exceed all ASTM and ANSI standards, including ASTM A-106 Gr. B for material and ANSI B1.20.1 for threading. Units are marked for full traceability and are suited for hydraulic, petrochemical, and refinery operations.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Pipe Nipples | High Pressure Pipe Nipples

Tube Fittings eliminate deformation due to overtightening.

info@productnews.com (ThomasNet News) — Wed, 11 Mar 2009 08:33:51 -0500

Walterscheid(TM) WALPro(TM) Metric Flareless Tube Fittings feature 2-edge cutting ring that combines maximized axial strength and radial flexibility, providing 360° tube seal. During assembly, cutting edges penetrate tube while top area of profile ring seals along 24° surface of fitting body. Units exceed both DIN 2353 and ISO 8431-1 requirements and are available in full range of standard metric tube sizes.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Tube Fittings | Metric Fittings | Flareless Fittings

Rotary Union suits heat transfer fluid applications.

info@productnews.com (ThomasNet News) — Mon, 09 Mar 2009 08:32:11 -0500

Rated up to 500°F, 200 psig, and 3,500 rpm, RX Rotary Union is suited for high-temperature thermal oil applications. Tapered roller bearings support large radial and thrust loads, while bearing isolation barrier in seal chamber prevents moisture and contamination from entering bearing area. Available in sizes from 3/8 to 6 in. and in single- and dual-flow configurations, union also includes stainless steel springs located outside flow area and integral flange.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Rotating Unions | Rotary Joints & Unions

Liquid Tight Fittings and Tubing are flame retardant.

info@productnews.com (ThomasNet News) — Fri, 20 Feb 2009 08:37:12 -0500

Designed for permanent assembly between tubing and fittings, Heyco-Flex(TM) III liquid tight fittings and flexible tubing can be used in both wet and dry applications, and resist corrosion, oil, weak acids, and salt water. Non-toxic, and UV resistant units are rated for Type 3R applications. Tubing doesn't require threading for installation which eliminates possibility of cutting tubing and creating leak paths. Suitable applications include in automotive equipment, fiber optics, and robotics.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Corrosion Resistant Tubing | Fire Resistant Tubing | Fire Protection Fittings | Tube Fittings

Pipe Fittings eliminate leak-prone bolt holes.

info@productnews.com (ThomasNet News) — Mon, 16 Feb 2009 09:09:50 -0500

Enabling single-hole penetrations for piping, flanged thru-the-wall Pipe Fittings are available in PVC, stainless steel, and Hastelloy® in sizes for 2-12 in. piping. Wide, thick, gaskets tightly seal fittings under externally adjustable force against tank walls. Units are equally suitable for new and existing steel, and for concrete tanks with or without epoxy or glass coatings, or with membrane liners. Virtually maintenance-free, fittings are removable for repeated installation in other tanks.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Stainless Steel Pipe Fittings | PVC Pipe Fittings | Hastelloy Pipe Fittings

Grooved Copper System only requires wrench for installation.

info@productnews.com (ThomasNet News) — Wed, 04 Feb 2009 08:33:38 -0500

Gruvlok® CTS Copper System allows large-diameter (2-8 in.) copper tubing to be installed without soldering or brazing for new construction or retrofit jobs. Flame-free system eliminates any fire hazard and also eliminates temperature and weather factors as installation concerns. Mating directly to grooved end pipe for rigid and durable locked-in connection, CTS fittings are constructed with minimum copper content of 99.9% and produced with groove/cup ends in various configurations.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Pipe Fittings

Tube Fittings feature 2-edge cutting ring design.

info@productnews.com (ThomasNet News) — Tue, 03 Feb 2009 08:31:38 -0500

WALRing(TM) 24° profile ring metric flareless tube fittings feature captive 2-edge cutting ring as well as support ring in nut to simplify assembly. Elastomeric seal is placed on tube prior to final assembly and, combined with metal-to-metal seal, maximizes connection strength. Tolerating pressures up to 11,600 psi, fittings exceed DIN 2353 and ISO 8431-1 requirements and fit tube sizes from 6-42 mm. They are suited for use with all common tube materials.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: High Pressure Tube Fittings | Metric Fittings | Flareless Fittings

Tube Ends feature nylon threaded opening.

info@productnews.com (ThomasNet News) — Wed, 28 Jan 2009 08:34:33 -0500

Composed of black polyglass-filled nylon, SN 992 series RoHS-compliant tube ends provide means to attach leveling mounts and glides to tubes and pipes that are commonly used to construct frames, conveyor bases, and industrial machinery. Various inch sizes are offered, and additional inch and metric thread sizes are available upon request. Square threaded tube ends are also offered.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Tube End Fittings | Threaded Components

Plastic Barbed Fittings include single use/reusable versions.

info@productnews.com (ThomasNet News) — Tue, 06 Jan 2009 08:35:32 -0500

Thermobarb® fittings in nylon, polyethylene, PVDF, and polypropylene are compact in design and feature multiple barbes for secure connections. They are offered in sizes from 1/8-1 in. tubing ID, with hose nipples from ½-4 in. tubing ID. Designed for soft-walled tubing, chemically resistant units offer high impact strength and are available in various styles. Single-use version is manufactured from FDA-approved polypropylene and is sterilizable by autoclave or gamma radiation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Plastic Tubing Fittings | Barbed Fittings

Full Flange System targets Code 61 and Code 62 connections.

info@productnews.com (ThomasNet News) — Fri, 02 Jan 2009 08:40:46 -0500

With patent-pending design, Full Flange System enables flange to be attached to hose after fitting has been crimped on and is held in place by stainless steel retaining ring. System lets end users route hoses through tight spaces where assemblies with flange end already attached would not fit. Ranging from ¾-2 in., Code 61 flanges are rated up to 5,000 lb max working pressure, while Code 62 flanges are rated up to 6,000 lb. Both meet SAE J1518 dimensional standards.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Hose Fittings | Flanged Fittings | Hose Connectors

Conduit Fitting features single-piece design.

info@productnews.com (ThomasNet News) — Tue, 09 Dec 2008 07:46:03 -0500

On Adaptalok ATS, conduit seal and face washer are integrated. Required IP ratings are achieved by push and twist-pull installation and unit is removed via Adaptalok removal tool. It is available in sizes from 13-54 mm in straight, 90° elbow, and 45° elbow formats, with fixed or swivel nylon or metal thread options. Manufactured from Nylon and elastomer materials, fitting is suited for power/data protection in railway engineering, marine, and machine tools industries.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Conduit & Cable Fittings