Industrial Newsroom - Fluid & Gas Flow Equipment

Valves are available with single-/multi-station manifolds.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:33 -0500

Electronic Oxygen Clean series is available with single- and multi-station manifolds, which offer single- or double-sided mounting in oxygen-compatible electroless nickel-plated brass material and feature 1/8 in. NPT input ports as well as No. 10-32 outlets. Consuming 0.67 W, pneumatic Oxygen series has response time of 5-10 msec and ratings of 6, 12, or 24 Vdc. Available in 1-12 station versions, manifolds facilitate grouping of valves, fittings, or other pneumatic components.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pneumatic Valves | Electrically Operated Valves | Manifold Valves | Valve Manifolds

Rotating Nozzle meets FDA requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 May 2008 07:40:07 -0500

Suited for washing and rinsing applications, all-Teflon® rotating nozzle provides 360º spray coverage in compact assembly. A total of 5 spray patterns are available in 4 different pipe sizes for use at operating pressures up to 100 psi. Snap-on cap holds nozzle ball securely in place without threads or fasteners. Effective in containers up to 10 ft in dia, unit features self-cleaning and self-lubricating bearing mechanism.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Tank Washing Nozzles | Rotary Nozzles | Spray Nozzles

Flexible Conduit Fittings eliminate need for bending machines.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 May 2008 07:40:05 -0500

Flexel(TM) EMT Flexible Fittings come in 1¼ to 4 in. sizes with stub fittings on both ends to allow for use with set-screw and compression fittings. They bend to one or more angles with just elbow grease, knee, or hammer, to full 90° bend or any position in between, and they can also be re-bent. Internal diameter is maintained per NEC specification, and fittings are suitable for indoors and dry locations and are UL Listed and CSA Certified.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Flexible Conduits | Conduit & Cable Fittings

Fluorocarbon Lined Hose targets heavy-duty truck market.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:30 -0500

Designed for combustion residue resistance, Purosil fluorocarbon lined hoses and elbows can withstand extreme temperatures. Using DuPont Viton elastomer, which can resist diesel fuel combustion byproducts as well as alcohols and fuel additives, FC lined hoses offer chemical bond between fluorocarbon liner and silicone rubber composite structure. Fluorocarbon hoses have continuous operating temperature of 235°C and low temperature capabilities down to -43°C.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: High Temperature Hose | Automotive Hose | Rubber Lined Hose

Convolute Tubing targets high performance applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:19 -0500

Offered in 18-24 in. lengths, Micro ID Tubing features 0.094-0.187 in. ID and 0.156-0.500 in. OD. Phenolic paper grades such as RT629 and RT630 are used in electrical, heavy industrial, and general-purpose applications, while RTB320X, composed of extra-fine weave linen cloth and phenolic resin, is suited for ball bearing retainers in rotary equipment. Glass fabric grade, RT500X, uses extra-fine weave glass reinforcement with epoxy resin for cryogenic insulation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Packaging Products & Equipment

Search for suppliers of: Convoluted Plastic Tubing | Convolute Paper Tubes

Check Valve provides water hammer relief.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:19 -0500

Offering water hammer relief and tight non-return shut-off for existing flanged piping systems, Stop-Silent® AS 54 features retrofit design for direct implementation without structural or housing alterations. Solid-state valve is comprised of stainless steel perforated cone and rubber membrane. Suitable for use in water, oil, acids, and brines, valve has -20 up to +180°C temperature range and 232 psi max operating pressure. It handles fluids up to 10 fps and gases up to 50 fps.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Stainless Steel Check Valves | Air/Gas Check Valves

Dryer System delivers contaminant-free compressed air.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:16 -0500

In conjunction with large air compressors and systems, SKF® SFD dryer system dries compressed air for pneumatic applications directly from tank. Compact device incorporates 3-in-1 system to remove oil, contaminants, and moisture, operating up to 175-200 psi. Installing on wall or directly to compressor top plate, it can be supplied for 12, 24, and 120 Vac, or fully pneumatic requiring no electrical connection. Basic flow rates up to 40 cfm can be achieved.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Industrial Dryers | Compressed Air Dryers

Laboratory Faucet is available for 1-2 in. water loop.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:38 -0500

Designed to dispense clean water at point of use, Type 530 AquaTap(TM) Recirculating Laboratory Faucet features flow through head design that eliminates dead-legs and optimizes flow characteristics. Inline Flow Diverter (IFD) technology provides flow rate of up to 5 gpm with not more than 1.5 psi pressure drop. Faucet is available in SYGEF® PVDF, while accessory products, including IFD, are available in both SYGEF® PVDF and PROGEF® natural polypropylene.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Laboratory Faucets

Industrial Vacuum System utilizes VFD motor speed control.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 May 2008 07:44:28 -0500

Consisting of 2, 3, or 4 simplex oil-sealed liquid ring pumps, VmaxVFD systems are microprocessor-controlled and conserve energy by automatically adjusting pump speed to match varying vacuum demand. This also eliminates frequent stop-starts and promotes stable vacuum levels. Separately located variable frequency drive (VFD) main control panel provides single location for system control and aggregating alarm outputs for remote monitoring.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Liquid Ring Vacuum Pumps

Sink Strainer has built-in magnets to catch stirring bars.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:32 -0500

Spinbar Magnetic Sink Strainer has 4 magnets in each corner that keep Spinbar Magnetic Stirring Bars from going down drain and long slits in sides and skirt that allow fluids to drain rapidly. Available in blue or green, chemical resistant unit has flat edge on one side that allows it to be placed close to sink wall. Four legs anchor strainer in sink drain and prevent it from being dislodged by flowing liquid.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Laboratory Equipment & Supplies | Sink Strainers

Vent Exhaust Arrestor safely neutralizes chlorine.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:28 -0500

To help keep buildings free from chlorine-related acid corrosion, Capital Controls® Type VEGA(TM) treats occasional chlorine gas vent releases that normally accompany chlorine container changeovers. Disposable chlorinator vacuum regular vent gas arrestor is 5 gal HDPE disposable container of chemically impregnated media, which reacts on contact to convert chlorine to harmless landfill-disposable salt. It eliminates combustion concerns and does not need neutralization prior to disposal.

This story is related to the following:
Materials and Material Processing
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Neutralizing Chemicals | Chlorine Gas Control Equipment

Ductless Filter Boxes enable fume hood conversion.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:26 -0500

Portable Filter Boxes provide laboratories with ability to convert total-exhaust hood into energy-efficient ductless fume hood. They utilize gas-phase-bonded carbon filters to protect fume hood operator by capturing chemical fumes and vapors and eliminating carbon dust. Post-filter gas sensor is linked to microprocessor controller, which allows adjustment of airflow velocities. Boxes also include lockable casters and 8 in. exhaust connection.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Fume Filters | Air Filtration Systems

Hydraulic Hose/Couplings handle pressures up to 6,000 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:26 -0500

Featuring tight crimp seal and rugged corrosion resistance, Spiral Hose and Couplings include precision machined internal ferrule that crimps and tightly locks into any type of spiral hose for secure, leak-proof fit. Finished with RoHS compliant trivalent Chromium-6 free process, units are available in 550 standard sizes and end configurations including JIC, O-ring, Pipe, Metric, and are intended for non-skive SAE 100 R12, R13, 4SH, and R15 applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: High Pressure Couplings | Hose Couplings | Hydraulic Couplings

Variable Speed DC Vacuum Pumps offer 45 lpm flow rate.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:20 -0500

Offering 2-stage diaphragm mechanism with ultimate vacuum to 1.5 Torr, Welch® VARIFLOW(TM) Vacuum Pumps can be used for full chemical- and standard-duty operation in OEM and laboratory applications. Chemical Duty Model 8115D-20 uses PTFE heads/diaphragms and FKM valves, while Standard Duty Model 8115D-25 uses aluminum heads and EPDM diaphragms/valves. All models use 24 V brushless dc motors with maximum power consumption of 85 W and can restart under vacuum.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Chemical Pumps | Diaphragm Pumps | Variable Speed Pumps | Vacuum Pumps

Silicone Tubing and Hose are available in medical grades.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:13 -0500

Silcon® Medical unreinforced tubing withstands temperatures from -100 to +400°F and is stocked in 22 sizes ranging from .012-¾ in. ID. Withstanding -80 to +350°F temperatures, braid-reinforced Silbrade® Medical hose is offered in 8 sizes from 1/8-1 in. ID. Both are translucent, peroxide-cured, and inert to UV, radiation, and ozone. Silicone elastomer meets USP Class VI and NSF-51 requirements, as well as FDA standards for use with food contact surfaces.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Silicone Tubing | Medical Tubing | Food Handling Tubing | Silicone Hose | Medical Hose | Food Handling Hose

Roman Tub Faucet Valves offer PEX connection.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:10 -0500

Designed to address connectivity concerns, Roman Tub Faucet Valves adapt to both PEX and copper-to-copper connections. Both work in varied substrates and can accommodate deck thickness of up to 4¼ in. Adjustable shank requires no cutting and is virtually error-proof. With quick-connect installation system, hoses snap together with click so installer can be assured connection is secure.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Plumbing Valves

Slide Valve dispenses repeatable solder paste dots and lines.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Apr 2008 07:44:28 -0500

Achieving 20,000 dots/hr on 1 mm grid, SV-100 Slider Valve delivers dots of less than 300 µm for solder paste types 4, 5, and 6 and dots as small as 125 µm in diameter with type 6 paste. Used for dispensing into small and hard to reach places, it is compatible with lead-free and no-clean solder pastes as well as silver-filled epoxies. Valve is suited for solder paste dots for passive components smaller than 0603 and rework of BGA and QFN electrical connections.

This story is related to the following:
Material Handling and Storage
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Solder Mask Dispensers | Liquid Dispensers | Slide Valves

Process Pump provides early warning of potential failure.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:20 -0500

Using onboard intelligence, ANSI Model 3196 i-Frame(TM) issues early warning of trouble so changes to process or machine can be made before failure. Stainless-steel condition monitor, nested securely atop power end, measures vibration and temperature within preset parameters. Upon detecting excessive conditions, it will activate early warning system by displaying flashing red lights. Other features include severe-duty thrust bearings and dual stainless-steel, bronze-bearing isolators.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Process Pumps

Pneumatic Hand Pump checks pressure/vacuum calibration.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:19 -0500

Rated for applications up to 100 psi or 28.8 in. Hg Vacuum, Series CHP Calibration Hand Pump features Acetel plastic and anodized aluminum construction that prevents body heat transfer and results in drift-free accurate readings. Oversized check valves provide smooth and controlled operation, and dual o-rings on all pistons ensure pump is leak-free. Applications include checking calibration of pressure or vacuum gauges, switches, or transmitters.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Hand Pumps | Calibration Pumps | Pneumatic Pumps

Direct Air Cooling Filters feature ePTFE membrane media.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:15 -0500

GORE® Cooling Filters include microporous membrane that allows cool, clean air to flow into cabinet while filtering out harmful contaminants such as dirt, dust, and sand. Expanded PTFE membrane has 99.0% particle filtration efficiency at 0.3 µm level. Available in either lightweight or anodized aluminium frame, filters are suited for wireless base stations, MCPAs, base band units, power cabinets, switching systems, and other outdoor electronic enclosures.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Cooling System Filters | Air Filters | Filter Media