ThomasNet News� -

RoHS-Compliant Rivet Nuts help resolve alignment issues.

info@productnews.com (ThomasNet News�) — Wed, 16 May 2012 08:30:08 -0400

Facilitating accurate attachment of components in off center applications, RIV-FLOAT®-SHORT rivet nuts allow manufacturers to account for tolerance stack up and resolve alignment issues during product assembly. Knurls increase spin out resistance in soft materials, and design allows installation from front side of work piece. Fastening technology is designed for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Rivet Nuts

Steel Rivets counter deformation and stress fractures.

info@productnews.com (ThomasNet News�) — Thu, 05 Apr 2012 08:34:16 -0400

Offered in 1/8, 5/32, and 3/16 in. diameters, Grip Tite® Rivets come in range of steel bodies and steel mandrels with domed and large flange head configurations. Units have extended secondary side footprint for high-strength applications, with shear strengths from 326-696 lb, depending on rivet diameter, and tensile strengths from 382-764 lb. With anti-rattle properties, rivets are appropriate for fastening thick to thin material stack-ups and composite-to-metal material combinations.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Steel Rivets

Blind Rivet securely fastens soft or brittle materials.

info@productnews.com (ThomasNet News�) — Tue, 31 Jan 2012 08:29:53 -0400

Characterized by wide grip range, POP® LS Rivet is designed to set in tri-fold configuration, which separates into 3 legged sections to ensure secure joint. Mandrel head is contained within rivet body, eliminating rattling joints. Set creates large secondary head formation that will evenly distribute load, which is key in preventing material damage, pull-through, or rivet failure.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Pop Style Rivets | Blind Rivets

Plastic Blind Rivets are non-conductive and non-corrosive.

info@productnews.com (ThomasNet News�) — Tue, 17 Aug 2010 08:33:23 -0400

Available to fit hole sizes ranging from 0.156-0.260 in. and metric hole sizes of 4-6.6 mm, Blind Rivets are used to fasten plastic to plastic, plastic to metal, and plastic to fiberglass. They feature molded black impact modified nylon 6/6 body and black acetal pin, and 3-leg design that securely locks panels in place and prevents pullout. Offering insertion from either side of assembly, all 14 models can handle grip ranges of .028-.413 in. and metric grip ranges from 7-10.5 mm.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Corrosion Resistant Rivets | Blind Rivets | Panel Fasteners | Plastic Rivets

Double Locking Rivets target heavy-duty applications.

info@productnews.com (ThomasNet News�) — Wed, 14 Apr 2010 08:31:12 -0400

Orlock(TM) rivets feature double locking system and high shear and tensile strengths to accommodate heavy-duty structural applications. They provide water/vibration resistance to joints and offer large blind side bearing area that spreads clamp load over large area. Suitable for thin, brittle, and soft sheet materials, units have grip ranges up to 39.5 mm and support various head types, including P, L, X, and K. Optional decorative caps are available.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Structural Rivets

Steel Pull-Thru Rivets can surface flush on both sides.

info@productnews.com (ThomasNet News�) — Mon, 14 Sep 2009 08:32:19 -0400

With no loose mandrel heads present in final assembly, 3 mm steel counter-sunk rivets suit electronics applications. Manufactured to ISO, QS, and TS requirements, they can handle applications with no protrusion as well as those requiring installation from either side of application. RoHS and DFAR compliant units have been color coded for quick visual identification on production floor.

This story is related to the following:
Portable Tools Sponsored by: Channellock, Inc. - Sweepstakes Ad
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Rivet, Rivet Setting & Riveting Tools | Steel Rivets | Blind Rivets | Rivet Machinery | Fastener Machinery | Steel Fasteners | Blind Fasteners

Snap Rivets feature countersunk design.

info@productnews.com (ThomasNet News�) — Mon, 13 Apr 2009 08:30:46 -0400

Designed for flush surfaces, RoHS-compliant SRCS Series substitutes normal countersunk screws and bolts and is installed by hand. Tamper-resistant design allows access from back of panel only, while locking feature holds pin flush in body after installation.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Countersunk Rivets

High Strength Structural Rivets resist rattle and vibration.

info@productnews.com (ThomasNet News�) — Fri, 02 Jan 2009 08:40:58 -0400

POP® brand HS (High Strength) blind rivets provide positive mandrel head retention and maximized rattle and vibration resistance. Offering consistent clamp force, high-strength rivets also accommodate oversized holes and are compliant with ISO, QS, TS, and RoHS. Product line is available in range of ¼ in. dia domed head steel and aluminum materials.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Structural Rivets | Blind Rivets | High Strength Rivets

Plastic Rivet blends into food industry applications.

info@productnews.com (ThomasNet News�) — Tue, 30 Dec 2008 09:01:47 -0400

Colored blue and made of FDA-accepted material, Alligator® Plastic Rivet fasteners are available to match conveyor belts used in food industry applications from -20 to +180°F. Non-magnetic product can be mechanically applied with portable installation tool, is non-scratching, and provides quiet splice as it operates over conveyor components. Removable hinge pin facilitates belt cleaning and installation with minimal dismantling.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Plastic Rivets

Stainless Steel Rivet Nut features cold formed construction.

info@productnews.com (ThomasNet News�) — Mon, 08 Dec 2008 07:46:29 -0400

With design that promotes thread strength, Dejond TUBTARA® 304 Stainless Steel M10 fully cold formed rivet nuts come in 4 different types. Available sizes include SPO (Flat Head, Round Shank, Open End), SPX (Flat Head, Round Shank, Closed End), SFO (Countersunk Head, Round Shank, Open End), and SKO (Low Profile Head, Round Shank, Open End).

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Stainless Steel Nuts | Rivet Nuts

Rivet Nut features internally floating threads.

info@productnews.com (ThomasNet News�) — Fri, 12 Sep 2008 07:36:27 -0400

Facilitating attachment of components in off center applications, RIV-FLOAT(TM) can accommodate for tolerance stack up in manufacturing process. Floating nut with .020 in. radial float aligns to drive angle of screw and eliminates cross threading and spin out. Product is suited for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Threaded Nuts | Blind Rivet Nuts

Blind Rivet Fastener offers extended grip range.

info@productnews.com (ThomasNet News�) — Thu, 26 Oct 2006 07:45:35 -0400

Available in 3/16 and ¼ in. sizes, HuckLok(TM) offers ¼ in. grip range, allowing it to join assemblies from 1/8-7/8 in. thick. After maximum clamp has been achieved from minimum to maximum grip, shear ring breaks free from pin and settles into appropriate catch groove. High-shear, structural steel HuckLok features double-locking design, installs within seconds, and is suited for use with variety of air-actuated tooling.

This story is related to the following:
Fasteners and Hardware
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies

Search for suppliers of: Steel Rivets | Riveting Clamps | High Shear Rivets

RoHS-Compliant Rivet replaces up to 3 different sizes.

info@productnews.com (ThomasNet News�) — Wed, 05 Jul 2006 08:02:45 -0400

Suited for applications where same rivet body size is specified but multiple grip ranges are required, POP® Steel Multi-Grip(TM) Rivets automatically adjust grip range during setting to accommodate range of variation in material thicknesses. Elliptical impressions in rivet body ensure consistent compression of rivet body during setting, and rivet body expands to completely fill irregular or oversized holes. Products come in 1/8-3/16 in. dia in domed head and large flange configurations.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Steel Rivets

Releasable Snap Rivet is installed/removed without tools.

info@productnews.com (ThomasNet News�) — Fri, 14 Apr 2006 07:47:13 -0400

Suited for applications where secured components may need to be removed, RRR Series comes in 2 sizes to accommodate panel thicknesses from .059-.217 in. and works in round holes as well as non-rotating square holes. RoHS-compliant product is manufactured of black nylon material. For installation, users place rivet in hole and press head; legs of rivet expand to firmly lock components into place. Design allows for removal of pin and rivet by pulling on side tabs.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Nylon Rivets | Snap Fasteners

Anchor Rivets feature two-piece design.

info@productnews.com (ThomasNet News�) — Tue, 10 Jan 2006 07:13:19 -0400

Available in beige and grey, all-plastic ¼ in. Truss Head Anchor Rivets are blind fasteners for solid or hollow materials. Nylon body provides thermal, electrical, corrosion, and vibration resistance. Mushroom, Round, and Flat Head Anchor Rivets are also available.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Blind Rivets | Nylon Rivets | Truss Head Rivets

Rivets deliver consistent, stable clamp force.

info@productnews.com (ThomasNet News�) — Fri, 05 Aug 2005 10:04:01 -0400

Suited for automotive, electronic assembly, and transportation industries, High Retention rivets employ rib design that counters deformation and stress fracture pressures. They are available with steel and stainless steel bodies and mandrels as well as domed, large-flange, and 120° countersunk head configurations. Offered in 1/8, 5/32, 3/16, and ¼ in. dia sizes, rattle-resistant rivets exhibit shear strengths from 213â�"1,056 lb and tensile strengths from 269â�"1,174 lb.

This story is related to the following:
Fasteners and Hardware
Transportation Industry Products

Search for suppliers of: Stainless Steel Rivets | Steel Rivets | Automotive Rivets

Barbed Fasteners have low profile head for tight spaces.

info@productnews.com (ThomasNet News�) — Tue, 12 Jul 2005 08:14:53 -0400

Manufactured in black Nylon 6/6 material, RBF Series Barbed Fasteners feature ribs that deflect when pushed into hole, then spring back for a secure, non-removable lock. Fastener push mounts into panel or board and is quickly installed by hand. Barbed fasteners are also available by special order in natural color or flame retardant material and in other combinations of head, barbed end, and body length.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Nylon Rivets

Fan Mounts suppress unwanted fan noise.

info@productnews.com (ThomasNet News�) — Thu, 23 Dec 2004 07:58:19 -0400

Series FM elastomeric rivets connect small cooling fans to fan components and mounting hardware. High elongation rubber allows for assembly by hand and eliminates need for screws and nuts. Two styles are available: one with low profile end for single-direction, short protrusion on mounting panel side, and another for 2-direction mounting of fan components to leading fan flange. Both are black EPDM rubber available in 2 different durometers.

This story is related to the following:
Fasteners and Hardware
HVAC

Search for suppliers of: Fan Component Parts | Fan Connectors | Rivets

Fasteners feature vibration-resistant joints.

info@productnews.com (ThomasNet News�) — Mon, 18 Oct 2004 07:42:14 -0400

Suited for long grip applications, 2-piece Rivet-Mates fasten multiple components up to 2 in. thick without marring of application's surface. They are suitable for steel fences, highway signs, metal furniture, construction signs, aluminum buildings, wood and metal assemblies, transportation vehicles, and steel storage containers. Standard, handheld blind rivet tools are used for fastening.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Blind Rivets | Blind Fasteners

Rivet Strips speed conveyor belt splicing.

info@productnews.com (ThomasNet News�) — Thu, 15 Jul 2004 07:41:11 -0400

Flexco® Rapid Loaderâ"¢ Collated Rivet Strips facilitate installation of Flexco SRâ"¢ Rivet-Hinged and BRâ"¢ Butt-Rivet conveyor belt fasteners. Plastic strips hold 4 sets of 5 rivets in pattern required for SR/BR installation. Each block of 20 rivets, which installs 4 adjacent fasteners, loads in approximately 7 seconds. Strips are color-coded to assure correct rivet size selection for belt thickness and for consistency across splice.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Rivet Sets