ThomasNet Industrial Newsroom -

Ejector Pins are through-hardened to Rc 60-63.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Sep 2008 07:43:02 -0500

Featuring heads that are finished and chamfered for proper seating and annealed to facilitate machining, Regal Thru-Tuff(TM) M-2 HSS Ejector Pins are stocked in 6, 8, and 10 in. lengths in fractional (TT type) diameters, and .0005, .001, .002, and .005 in. standard oversize (TTO type) diameters. Available in straight/shoulder styles, they are suitable for molding nylon and other parts with high glass content resins. Modifications such as heat flats, vents, and spherical radii are optional.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Molding Insert Pins | Ejector Pins

System targets power distribution applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Mar 2008 07:36:50 -0500

Offering full range of weld stud fasteners and equipment including arc weld studs, capacitive discharge weld studs, and cable management studs, POWERfast(TM) System withstands harsh environments and is suited for isolation bushings, grounding lugs, and other access panel applications. System also includes hinge pins, security bolts, door rods, and paint stripping nuts.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Welding Equipment and Supplies

Search for suppliers of: Power Distribution Systems | Hinge Pins | Welding Fasteners | Security Bolts

Adjustable Ball Lock Pins offer 3 handle styles.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Mar 2008 07:46:17 -0500

Available in steel or stainless steel, Adjustable Ball Lock Pins are manufactured with 4 balls instead of 2 for more distributed ball-pullout force in clamping applications. Units are suitable for pulling 2 components together or to provide adjustable grip length. Available with shank diameters ranging from ¼-1 in., pins offer choice of knob, T, or L handle styles.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Lock Pins

Pins and Punches match specific customer requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jul 2007 07:49:43 -0500

Custom Precision Pins and Punches can be manufactured from various grades of tool steels such as M-2, A-2, A-10, H-13, S-7, PM-M4, PM-10V, and PM-15V for toughness and wear resistance, 420SS and 440SS SS for corrosion resistance, and Moldstar(TM) copper alloys for heat transfer values. Available with tip diameters as small as 0.002 in. and lengths up to 14 in., they can be held to within 0.000050 in. tolerances and surface finishes to 2 rms.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Portable Tools

Search for suppliers of: Core Pins | Custom Pins | Ejector Pins | Custom Punches

Alignment Pins suit ATCA-style faceplate mounting.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Feb 2007 07:15:47 -0500

Engineered with 15° tapered point, Type TPXS self-clinching pins facilitate location of mating hole when mounting faceplates in telecom rack system applications. Made from 300 Series stainless steel, pins are 16 mm long and designed to satisfy TCA PICMG 3.0 specification. They install permanently in aluminum or steel sheets as thin as 1 mm with hardness of 70 or less on Rockwell B scale. ATCA-style faceplate mounting can be realized using captive retention screws with M3 threads.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Stainless Steel Pins | Fastening Pins | Self-Locking Pins

Ejector Pins suit molding with high glass content resins.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Dec 2006 07:46:42 -0500

Hardened-through to Rc 60-63 with annealed heads, Regal TT Type Thru-Tuff(TM) M-2 High Speed Steel Ejector Pins are available in inch-fractional sizes and oversize diameters in straight and shoulder styles. Units are hot forged and stress relieved for uniform grain flow. They are precision ground to 4-10 rms surface finish and .0003 in. tolerance. Sizes range from 1/32-3/8 in. in 6, 8, and 10 in. lengths as well as +.0005, .001, .002, and .005 in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Ejector Pins

Quick Release Pins are protected from accidental triggering.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Sep 2006 08:30:54 -0500

Offered in 2- or 4-ball design, LG Series DZUS® Lockwell® pins feature Y-handle design and cupped recess to protect against accidental triggering of pushbutton pin release. Flared handle also provides grip for pin insertion or removal. Vibration-resistance helps maintain positive grip of pin in installed position while single-acting pin design facilitates tool-free insertion or removal with pushbutton actuation. Products are made to order for fit, strength, and performance.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Quick Release Pins

Ejector Blades come in range of standard inch sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Sep 2006 07:42:40 -0500

Machined from H-13 hotwork die steel with 50-54 Rc blade hardness and annealed heads, US Standard Inch Ejector Blades range from .024-.078 in. thick and .100-.484 in. in width with tolerance of +.0000-.0003 in. Units come in 8 standard overall lengths from 5-10 3/8 in. Custom blades in variety of tool steels with corner radii, vents, head flats, and EDM shapes can also be provided.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Ejector Pins | Machine Blades

Precision Rollers and Pins are custom-shaped.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 May 2006 08:08:17 -0500

Suited for applications requiring tight tolerances or custom shapes, precision pins and rollers are available in standard materials of carbon steel, chrome steel, stainless steel, and various plastics to meet strength and corrosion-resistance needs. Rollers and pins, available in diameters from 1-20 mm and lengths from 3-50 mm, are offered in various end configurations.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Material Handling and Storage

Search for suppliers of: Steel Rollers | Plastic Rollers | Custom Pins

Ball Lock Pins offer secure hold and quick release feature.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Apr 2006 07:29:45 -0500

Quick Release Ball Lock Pins are suited for fastening and locating applications that require positive, secure holding and can utilize tool-less removal convenience provided by ball-lock technology. Offered in 600+ configurations, products come with shank diameters that encompass 3/16, ¼, 5/16, 3/8, and ½ in. sizes, with ½-6 in. grip lengths. There are 4 styles of handles and 3 steel shank material options. Double-shear strength ranges from 2,200-36,800 lb for entire series.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Ball Lock Pins

Lifting Pins feature quick-connect design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Mar 2006 07:12:48 -0500

Constructed with 17-4 PH stainless steel forged lifting ring, stainless steel Kwik-Lok(TM) Lifting Pins combine positive-locking pin, push button release design with 5:1 strength factor. Products accommodate range of lifting hooks or hardware, and load spreader bar on each ring helps prevent accidental actuation. Inch sizes offer pin diameters from ¼-5/8 in., grip lengths from 0.5-3.00 in., and max lifting loads from 400-1,400 lb. Metric sizes are also available.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Quick Release Pins | Stainless Steel Pins

Locking Pins incorporate impact-resistant t-handle.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jan 2006 07:04:52 -0500

Suited for commercial use in OEM and consumer products, QUEST(TM) series Kwik-Lok(TM) Positive Locking Pins offer positive locking feature and 303 stainless steel pin body construction. T-Handle style has plastic handle made of polycarbonate resin for resistance to impact, low-temperatures, and chemicals. Available with ½-6 in. or 10-100 mm grip lengths, standard sizes range from 3/16-1 in. or 5-25 mm nominal pin diameters.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Lock Pins | Stainless Steel Pins

Positive Locking Pins offer alternative to detent pins.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Aug 2005 09:38:07 -0500

QUESTâ"¢ Series Kwik-Lokâ"¢ Positive Locking Pins feature 303 stainless steel body and recessed button with polycarbonate resin handle for impact, low temperature, and chemical resistance. Suited for commercial use in OEM and consumer products, units offer nominal pin diameters from 3/16â�"1 in. or 5â�"25 mm with ½â�"6 in. or 10â�"100 mm grip lengths.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Self-Locking Pins | Lock Pins

Tow Bars and Hitch Pins have heavy-duty design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Jul 2005 08:01:11 -0500

Suited for railroad equipment, tow bars feature square-tube design and are offered in 5 sizes from 42 in. to 22 ft long. Zinc-plated pin-lock has ergonomic, folding handle and includes steel hairpin cotter. Painted red for visibility, clevis combination handle/restrainer keeps pin securely in tow bar and features ergonomic, hinged, fail-safe handle. Rigid-mounted pintle hook, made of forged steel, makes positive, secure connections and handles loads from 30,000â�"90,000 lb.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mechanical Components and Assemblies
Transportation Industry Products

Search for suppliers of: Towing Bars | Railroad Equipment | Towing Accessories

Hotwork Ejector Pins are precision ground and laser marked.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Jan 2005 07:34:56 -0500

Constructed from hotwork die steel, RHX Hard-Coreâ"¢ Series H-13 Ejector Pins are hardened throughout to 50â�"55 RC and have surface that is ion nitrided to 65â�"74 Rc. Products, marked for identification, come in 1/32â�"½ in. dia and 6, 10, and 14 in. lengths as well as +.005 in. oversize and ½, 2, 3, and 4 in. shoulder lengths. Diameter tolerances can be held to .0003 in., and pins eliminate flaking, cracking, and dishing. They are thermal resistant to 1,100°F.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Ejector Pins

Threaded Detent Pins are held by spring force.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Dec 2004 08:04:50 -0500

Solid alignment pins have ground shank and threaded end for knob handle, and locking balls hold pin in place by spring force. Knob handles can be permanently secured with thread-locking adhesive. Available in stainless steel, products come in standard shank diameters from 3/16-½ in. and various grip lengths. Products require users to push to insert and pull to remove.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Detent Pins

Locating Pins come in 50,000 size variations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Dec 2004 08:11:16 -0500

Suited for OEM applications, Locating Pins are made with hardened A2 tool steel for common industrial usage or in corrosion-resistant 304 stainless steel for machines found in food processing, medical, and pharmaceutical industries. Design engineers can specify all critical dimensions in metric and inch sizes, including head heights, lengths, shanks, and diameters in very fine increments, as well as OD tolerances.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Locating Pins

Side Thrust Pins are available in metric sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Nov 2004 09:43:10 -0500

By pressing pin body into proper bore size and depth, Side Thrust Pins hold, position, or clamp workpieces. Four versions are available: single sided with stainless steel ball and stainless steel spring, single sided with plastic ball and stainless steel spring, single sided with black oxide finish steel ball and elasticized plastic spring, and double sided with black oxide finish steel ball and elasticized plastic spring.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Clamping Pins

Side Thrust Pins and Bushings come in metric sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Nov 2004 07:46:08 -0500

Suitable for holding, positioning, and clamping of workpieces, Side Thrust Pins feature knurled aluminum body that requires hole tolerance of H8. Available in light, standard, or heavy-duty end pressures, pins are zinc-plated hardened steel or Delrin plastic. Versions with NBR/perbunan rubber seal are gold-passivated and those without seal are silver-passivated. Made of steel with black oxide finish, Eccentric Bushings facilitate adjustment of side thrust pins.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Clamping Pins | Eccentric Bushings

Micro-Serrated Drive Pins enhance workholding capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Nov 2004 07:46:04 -0500

Designed to facilitate hard turning, Neidlein hard-coated drive pins mount around face driver to reduce or eliminate part slippage and scrapped parts. If slippage occurs, pins can be used again. Given proper parameters, products achieve circular run outs of less than 0.002 mm in long production runs. They work with proprietary SB/FSB and FFB face drivers as well as special application face drivers for hard turning. Pins also work with other brands.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Machined Pins | Face Drivers