ThomasNet Industrial Newsroom -

Force Indicating Compression Screws suit BGA/QFN socket use.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Aug 2008 07:56:54 -0500

Facilitating BGA chip installation process, Models TS-SS-11, TS-SS-12, TS-SG-01, and TS-SG-02 Force Indicating Compression Screws allow quick and error free chip insertion in sockets with up to 40 GHz bandwidth. Ergonomically designed devices work in all socket sizes from 10 x 10 to 35 mm and with BGA ball counts over 1,000, and enable easy operation of sockets with elastomer, diamond particle, or spring pin contactors.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Electronic Fasteners | Screws | Socket Head Cap Screws

Cordless Screw Gun is lightweight and ergonomic.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:08 -0500

Weighing 5.1 lb and featuring 2-piece ergonomic design, Model PC-12 Cordless Screw Gun is 14 in. long, and is suited for remodeling punch-out jobs when corded tool is inconvenient or electric power is not available. Suited for professional remodelers and contractors for variety of drywall, assembly, and other applications, gun accommodates 1-2 in. fasteners and up to 600 screws per battery charge.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Portable Tools

Search for suppliers of: Industrial Guns | Screw Anchors | Captive Fasteners | Cordless Tools | Drywall Tools

Floating Panel Fasteners correct off-angle installations.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:03 -0500

Incorporating MAThreadÂ® anti cross-threading captive screw technology, PEMÂ® floating access fasteners compensate for up to .060 in. mating thread misalignment. Type PF11MW with knurled cap meets operator access area requirements similar to UL 508, while PF12MW with smooth cap meets service access area requirements similar to UL 1950. With #4-40 to Â¼-20 and M3 to M6 thread sizes, they suit close centerline-to-edge applications and can be installed on painted surfaces without marring.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Snap Fasteners | Panel Fasteners | Captive Fasteners

Universal Lock secures handwheel-operated valves.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:43:09 -0500

Without requiring any valve details, extra parts, or customized adaptors, SHL Smart Handwheel Lock can be added onto any existing size or type of handwheel-operated valve to mechanically prevent operation until safe. Solution locks wheel into pre-set safe positions, controlled by interlocking key release mechanism, and leaves space to grip handwheel. Coded key used to unlock valve is only released for use once correct sequence of precautions has been completed.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Lockouts

Clevis Hanger suspends mechanical piping systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:47:27 -0500

Available in 6 carbon steel models, Figure 1U Ultra Clevis Hanager features snap-open/snap-close design and accommodates pipe sizes ranging from Â½-4 in. Clevis bottom locks in place to prevent swinging while it supports pipe's weight when hanger is in open position. Flared edges facilitate installation for all pipe types and protect CPVC pipe from abrasion.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Clevises | Pipe Hangers

Door Latch offers up to 12 mm compression.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:50 -0500

Featuring 22 or 28 mm high roller cam that has 180Â° rotation range, 1-081SL Compression Latch offers up to 12 mm compression range which can be modified depending on length of cam. D-SNAP Technology enables fast installation without hardware or tools, while Design Symmetry technology allows same latch to be installed on both right- and left-hand doors. Meeting IP65 requirements for water and dust resistance, latch can be actuated with standard inserts.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Plant Furnishings and Accessories

Search for suppliers of: Door Latches | Door Hardware

Ceramic Fasteners offer continuous use at 1,500Â°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:25 -0500

Providing electrical insulation and resistance against heat and chemicals, Alumina Ceramic Fasteners may be used in hot water and chemical pumps as well as electronic applications such as electrical transformers and computer equipment. Ranging in size from M3-M10, fasteners include slotted flat fillister head machine screws, hexagon headed bolts, and hexagon and Dihedral nuts.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Machine Screws | Ceramic Fasteners | Hexagon Head Bolts | Hexagon Nuts

Hall-Effect Latches suit non-automotive applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Jun 2008 07:22:15 -0500

Offered in reverse battery protected packages, temperature-stable and stress-resistant latches have dynamic offset cancellation that reduces residual offset voltage. On single silicon chip, Models A3290 and A3291 include Hall-voltage transducer, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit protected open-collector output to sink up to 25 mA. Onboard regulator allows operation with 4.2-24 V supply voltages with -40 to 125Â°C operating temperatures.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Magnetic Latches | Hall-Effect Switches | Hall Effect Sensors

Wing Nuts are made of stainless steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:56 -0500

Offered in blank, tapped, and tapped through hole versions, Wing Nuts have hot stamped, matte shot-blasted finish. They feature slight dimple on ends to permit better grip and provide increased finger contact area. For certain minimum quantities, blank version can be tapped or reamed in inch or metric sizes to meet customer requirements.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Hardware | Wing Nuts | Stainless Steel Nuts | Blank Nuts

Conveyor Belt End Loops increase operational safety.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 May 2008 07:34:56 -0500

Designed for use with Flat-FlexÂ® conveyor belts, C-CureEdgeÂ® C-shaped end loops provide maximum safety because they will not snag or tangle during shipment, storage, or installation. This diminishes opportunity for damage to conveyor and minimizes risk of accidents from sharp or burred open ends. No conveyor modifications or reconfigurations are required in drive components, shafting, or other parts on conveyor lines, and individual strand stress is reduced on outside edge of belt.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Conveyor Belting | Wire Loops

Toggle Screw Grommet locks self-threading screw.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:33 -0500

Molded in UL94 V2 Nylon 6/6, RoHS-compliant TFR Series snaps in place to facilitate assembly. Once self-threading screw is installed, grommet expands and securely locks screw and assembled parts in place. Grommet legs are forced outward to help seal mounting hole and protect against dust and moisture. Mounting hole is square to prevent rotation.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Plastic Hardware | Plastic Grommets

In-Situ Rebar Splice meets Ultimate Splice requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:23 -0500

Without requiring bar-end preparation, sawing, or swaging, LENTONÂ® LOCK coupler installs with standard wrench or impact wrench. Gripping technology provides for development of full rebar strength and improved structural integrity in tension, compression, stress reversal, and dynamic applications. With less than 0.004 in. of slip, completed connection performs similar to continuous piece of rebar and meets/exceeds international building codes and DOT requirements.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Rebar Fasteners | Splicing Tools

Captive Fastener secures sheet metal panels.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:14 -0500

Featuring single-component design that combines function of captive screw and captive nut/cage nut, SNAP LINE 1-035SL Captive-Joiner 9.5 eliminates need to install separate handle. Unit offers tool-less snap-in installation, and is completely installed from front of panel, without insert. Device can also function as slam-to-close latch, requiring only push of panel against frame to ensure latching. Since it will not loosen from panel, fastener is suited for extreme vibration applications.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Captive Fasteners

Stainless Steel Latch is designed for smaller enclosures.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:41 -0500

Featuring pull-tab actuation and push-to-close latch engagement, M1-15 latch is constructed of cast stainless steel and suits enclosures that require corrosion-resistance. It has 122 lb max recommended working load rating and also performs in mobile applications where contents of enclosure can shift and create impact load on inside of door. Able to be installed in singe 1.5 in. round hole, latch comes in standard non-locking style and optional locking version.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Door Latches | Specialty Latches

Doorknob incorporates fingerprint recognition technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:18 -0500

BioKnob(TM) allows only users whose fingerprints have been programmed into lock's self-contained memory to turn knob and open door. It stores up to 100 sets of fingerprints, and all programming functions are accomplished directly on device. Fingerprint patterns are transformed by embedded software into template representing fingerprint, which is stored for future verification. Device runs on Li-Ion battery that recharges via AC adapter in 3 hr.

This story is related to the following:
Automatic ID
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Door Knobs | Biometric Devices | Fingerprint Identification Systems

Continuous Hinge Series meets military specifications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:54:53 -0500

Supplied with holes and cut to length as required, MS35000 series stainless steel piano hinges can serve marine, military, and shipboard applications. They are available in stock lengths or can be supplied to end-user requirements. Able to survive harsh environment and outdoor exposure, these RoHS-compliant hinges can be customized for any design engineering project. Also available is US Navy locker hardware manufactured to BuShips drawing number S-3200-860055.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Continuous Hinges | Piano Hinges | Stainless Steel Hinges

Automatic Rope Tensioner suits aero-mechanical conveyors.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Apr 2008 07:45:03 -0500

AMC AutoTensioner automatically measures and adjusts rope tension and indicates when rope is worn and needs to be replaced. It applies constant preload to conveyor's rope and disc assembly, compensating for natural changes in length. Pneumatic actuator is anchored at one end of conveyor and applies linear force to free moving return sprocket housing while manually adjustable precision filter regulator protects pneumatic actuator from over-pressure.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Material Handling and Storage

Search for suppliers of: Aero-Mechanical Conveyors | Rope Slide Tensioners | Conveyor Accessories

Fasteners compensate for mating hole misalignment.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:17 -0500

PEMÂ® floating self-clinching fasteners include non-locking Type A4 and self-locking Type LA4 fasteners that provide load-bearing threads in SS sheets as thin as .038 in. and greater with hardness of HRB 88. Available thread sizes range from #4-40 through #10-32 and M3 through M5. All clinching occurs on fastener side of sheet, which allows sheet to remain flush on one side, and RoHS-compliant fastener is permanently locked in place.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Stainless Steel Fasteners | Sheet Metal Fasteners | Self-Clinching Fasteners

Development Kit integrates wireless USB into mobile devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Mar 2008 07:40:55 -0500

Based on WSR601 single-die CMOS chip, SDIO Wireless USB solution lets vendors embed Wireless USB into portable and handheld electronic devices using Secure Digital Input/Output (SDIO) interface. Design package includes platform for development of embedded Wireless USB device solutions, based on SDIO interface. Using development platform, hardware, and software, developers can implement embedded small form factor module controlled by device side application CPU via SDIO bus.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Test and Measuring Instruments

Search for suppliers of: Evaluation Boards | Hardware Product Development & Prototypes

Hardware Kits let users make their own rolling ladder.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Mar 2008 07:41:26 -0500

Offered in 3 types, Hardware Kits feature quiet rollers and non-marring wheels. Kit contains 2 bottom rollers, 2 rolling top guides, 7 rung support rods for steps, fasteners, and instructions. Track kit includes 1 in. dia x 8 ft powder-coated black aluminum track, 2 end stops, support brackets and screws, and steel support dowels. Available in 8, 9, or 10 ft length, which user cuts to desired height, wood ladder kit offers choice of red oak, maple, or cherry wood ladders.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products
Plant Furnishings and Accessories

Search for suppliers of: Track & Roller Hardware | Wood Ladders | Rolling Ladders