ThomasNet Industrial Newsroom -

Rivet Nut features internally floating threads.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Sep 2008 07:36:27 -0500

Facilitating attachment of components in off center applications, RIV-FLOAT(TM) can accommodate for tolerance stack up in manufacturing process. Floating nut with .020 in. radial float aligns to drive angle of screw and eliminates cross threading and spin out. Product is suited for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Threaded Nuts | Blind Rivet Nuts

Eye Bolts suit light duty use.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:19 -0500

Injection molded in natural Nylon 6/6, Eye Bolts are resistant to aromatic, chlorinated, and ketone solvents as well as gasoline, oils, greases, and animal and vegetable oils. Thread sizes range from 6-32 with varying lengths from 1 ¼ to 5 ½ in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Eye Bolts

Ceramic Fasteners offer continuous use at 1,500°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:25 -0500

Providing electrical insulation and resistance against heat and chemicals, Alumina Ceramic Fasteners may be used in hot water and chemical pumps as well as electronic applications such as electrical transformers and computer equipment. Ranging in size from M3-M10, fasteners include slotted flat fillister head machine screws, hexagon headed bolts, and hexagon and Dihedral nuts.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Machine Screws | Ceramic Fasteners | Hexagon Head Bolts | Hexagon Nuts

Screws, Nuts, Washers withstand high-temperature conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:37 -0500

AURUM(TM) cross recessed pan head, socket head cap screws, hexagon nuts, and washers are made of AURUM thermoplastic polyimide resin. Brown in color, material exhibits heat resistance that enables continuous use at 240ºC and clean characteristics that ensure outgas is reduced to microscopic levels. Amounts of metallic impurities, such as alkali metal, are also reduced to microscopic levels. UL 94V-0 flame resistant material is also resistant to chemicals, plasma, radiation, and abrasion.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Socket Head Cap Screws | Recessed Head Screws | Hexagon Nuts | Screw Washers

Wing Nuts are made of stainless steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:56 -0500

Offered in blank, tapped, and tapped through hole versions, Wing Nuts have hot stamped, matte shot-blasted finish. They feature slight dimple on ends to permit better grip and provide increased finger contact area. For certain minimum quantities, blank version can be tapped or reamed in inch or metric sizes to meet customer requirements.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Hardware | Wing Nuts | Stainless Steel Nuts | Blank Nuts

Tension-Indicating Bolt works without torque wrench.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Apr 2008 07:36:03 -0500

HR (high resolution) SmartBolt has built-in monitoring device that changes from yellow to green and vice-versa to provide at-a-glance visual indication of proper tightening or out of spec performance. Bolt clamp tension changes of 5% or less are discernable by color changing indicator, which has no moving parts and operates entirely by elastic flexure and fluid migration. Bolt is resistant to degradation from severe vibration levels.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Torque Limiting Bolts | Special Bolts | Load Sensing Bolts

Locking Nuts do not have to be seated.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2008 07:53:58 -0500

Available in class 8 zinc-plated steel and AISI-304 stainless steel, Hardlock Nuts are reusable without loss of locking ability and require only spanner for installation. Upper nut is threaded down screw until machined recess comes into contact with tapered cone of lower nut. Lower nut is held stationary, either by being seated or with spanner, and locking torque between two nuts is induced. Held stationary by 3 locking forces, nuts offer resistance to vibration.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Steel Nuts | Stainless Steel Nuts | Spanner Nuts | Locknuts

Flange Locking Bolt features conical design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2008 07:53:11 -0500

Spinner-Grip Flange Locking Bolt has conical flange design that locks bolt to part without need for lock washer. It can be uninstalled and reused without reapplication of locking patches or additional hardware and can be used in zince-plated or corrosion-resistant SS applications. Also resistant to vibration, bolt is suited for industries such as material handling, construction, medical, and packaging.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Locking Bolts | Flanged Head Bolts

System targets power distribution applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Mar 2008 07:36:50 -0500

Offering full range of weld stud fasteners and equipment including arc weld studs, capacitive discharge weld studs, and cable management studs, POWERfast(TM) System withstands harsh environments and is suited for isolation bushings, grounding lugs, and other access panel applications. System also includes hinge pins, security bolts, door rods, and paint stripping nuts.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Welding Equipment and Supplies

Search for suppliers of: Power Distribution Systems | Hinge Pins | Welding Fasteners | Security Bolts

Concrete Anchor delivers IBC-compliant holding power.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Mar 2008 07:49:46 -0500

Featuring one-piece stainless steel clip design, Power-Stud(TM)+SD2 carbon steel bolt is designed for use as mechanical anchor in concrete and other masonry applications. This fully threaded, wedge anchor meets International Building Code (IBC) requirements for strength design (cracked concrete). Bolt is available in 3/8, ½, 5/8, and ¾ in. diameters and various lengths from 3-8½ in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Concrete Anchors | Carbon Steel Bolts

Clamp Assembly offers corrosion resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:48 -0500

Optimizing quality assurance, Advantage Wing Nut and Clamp Assembly incorporates Advantage Wing Nut with Nitronic 60 coating, which resists corrosion and includes anti-galling properties. Tip and seat are precision-machined, providing positive lock, while electro-polished clamp offers corrosion resistance and smoothes screw head. Hex end on nut and available torque wrench allow for exact calibration to meet 35 or 55 lb-in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Material Handling and Storage

Search for suppliers of: Wing Nuts | Precision Clamps

Locknuts use clamping screws with hexalobular socket head.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jan 2008 07:37:42 -0500

Suited for applications where space is limited, Spieth Type MSF Locknuts utilize clamping screws with socket head similar to TORX system screw to optimize handling, mounting, and service life of tools used for tightening. Units feature Spieth locking principle, which provides vise-like locking of locknut.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Lock Nuts

Hexagon Nuts suit installation in confined spaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 18 Dec 2007 07:37:08 -0500

Requiring one operation instead of two, Barb Nuts are cold-formed hexagon nuts with external shakeproof washers, while Carp Nuts have same design but are combined with conical spring washer. Nuts are made from low carbon steel SAE 1010 with Rockwell Hardness of C-30 max, and washers are SAE1050-1065 with hardness of HRC40-46 max. Free to rotate on nuts, washers are available in either yellow or white chromate finish.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Hexagon Nuts

Fastening System eliminates leakage in gasketed joints.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Dec 2007 07:50:20 -0500

Optimizing powertrain torque transmission, Z-Form Zero Clearance Bolt and Sleeve Assembly prevents lateral shift and slippage in high-shear applications. Shoulder expands deformable steel sleeve during installation, blocking out all clearance between bolt shoulder and through-hole in clamped components. Available in M6-M12 sizes, fastening system is suitable for automotive and truck ring gears, floating axle hubs, brake and suspension components, flex plates, and flywheels.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Automotive Bolts

Non-Metallic Clip Nuts will not scratch or corrode.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Nov 2007 07:54:08 -0500

Employing floating metal nut housed in composite clip, Torlon® Composite Clip Nuts withstand torque loads in excess of 100 lb-in. and are used to secure flooring, fairings, and interior trim. Nuts will not scratch structure's primer or plating during installation and/or removal and are not susceptible to corrosion. Able to be injection molded, Torlon® polymer material provides strength competitive with metal, passes FAA flammability tests, and is unaffected by aviation fluids.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Clip Nuts

Spinning Clinch Bolts suit thin metal panels.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Nov 2007 07:46:06 -0500

PEM® spinning clinch bolts for thin metal panels install securely using controlled clinching action to captivate screw while allowing it to spin freely in sheet, which enables quicker attachment of mating hardware by eliminating need for loose fasteners. Bolts include Type SCB(TM) fasteners featuring unthreaded neck for axial float and Type SCBJ(TM) hardware with jacking feature. They come in various lengths and thread sizes from 4-40 through 6-32 and M3 through M4.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Metal Bolts | Panel Fasteners | Sheet Metal Fasteners | Steel Fasteners

Adapter Nut supports quick change hole saw systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Nov 2007 07:46:05 -0500

Adapter nut lets users cut with any Bosch hole saw and with most major brand hole saws. It features hex shank for installation and removal with quick change mandrels. Heavy-duty hex drive design ensures that hole saws lock quickly and securely into place. Users can attach adapters to their cups, drill hole, and pull back on mandrel to change cup sizes in seconds, and can also eject plug upon angled re-insertion of pilot bit.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Heavy Nuts | Quick Release Nuts

Knurled Nuts and Knobs come in inch and metric sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Sep 2007 07:47:00 -0500

Made of black nylon plastic with smooth, glossy finish, Hollow Knurled Nuts and Knobs have tapped through inserts of zinc-plated steel molded in. On clamping applications, partially protruding insert prevents chipping of plastic.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Plastic Nuts | Plastic Knobs | Knurled Nuts

Metric Eye Bolts and Eye Nuts are made of stainless steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 May 2007 08:38:37 -0500

Manufactured to DIN 580 and DIN 582 specifications, Eyes Bolts (sizes from 6-42 mm) and Eye Nuts (sizes from 8-30 mm) come proof load tested and certified. They operate over -20 to +200ºC range without lifting capacity impairment and are passivated for optimal corrosion resistance. CE-compliant, electropolished products suit applications such as chemical equipment, food handling, pressure vessels, enclosures, sanitary equipment, and nuclear components.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Stainless Steel Fasteners

Flange Lock Nuts resist corrosion in harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Apr 2007 08:12:26 -0500

Available in 18/8 SS, Spinner-Grip(TM) Flange Lock Nuts are suited for use in industries such as chemical, fluid process, medical, food service, automotive, and industrial. Free-spinning design eliminates need to tighten by wrenching nut down bolt, and nuts lock base to part, providing tensile strength to hold entire fastener assembly. Units usually do not require use of flat washers, and withstand wide variations in temperature.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Lock Nuts | Flange Nuts