ThomasNet News� -

Turning Grades have CVD coating, diverse cutting speed ranges.

info@productnews.com (ThomasNet News�) — Thu, 02 May 2013 08:28:20 -0400

While wear- and deformation-resistant NL200 is intended for machining cast iron, wear-resistant NL250 is suited for semi-finishing and finishing applications. Medium and rough machining of steels and cast iron materials with light scale but no interruption can be accomplished with NL300, and NL400 handles medium and rough machining on stainless steel and exotic alloys. Fine grain NL920, with edge security on steels and stainless steels, serves rough and heavy machining applications.<br />

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Portable Tools Sponsored by: Channellock, Inc. - Sweepstakes Ad
Services
Fasteners and Hardware

Search for suppliers of: Metal Cutting Tools | Turning Machinery | Turning Tools | Cutting Tools | Metal Turning | Inserts

Steel Turning Inserts promote productivity, process reliability.

info@productnews.com (ThomasNet News�) — Wed, 13 Mar 2013 08:32:23 -0400

Intended for steel turning, Tiger•tec® Silver Turning includes indexable inserts in 3 grades – WPP10S (ISO P10), WPP20S (ISO P20), and WPP30S (ISO P30) – and 4 geometries: FP5, MP3, MP5, and RP5. Products have CVD coating and handle various materials, including unalloyed/alloy steel, cast steel, stainless ferritic/martensitic steel, and ductile cast iron. Substrate for these inserts is micro-structured aluminum oxide, and cutting edge preparation process lends to durability.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Wear Resistant Inserts | Special Inserts | Inserts | Turning Tools

Threaded Tube Inserts offer thread sizes from 3/8-16 to ¾-10.

info@productnews.com (ThomasNet News�) — Thu, 28 Feb 2013 08:31:22 -0400

Available in tube sizes from 1.5–2 in., SQH Square Heavy Duty Series and RDH Round Heavy Duty Series are made from black glass-filled nylon with brass threaded insert, making them suitable for indoor and outdoor use. Corrosion-resistant units feature static load rating up to 2,000 lb. For tilting and swiveling capability, SQH and RDH can be used in conjunction with AFM Series Swivel/Tilting Adjustable Machinery Feet.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Threaded Inserts

Indexable Ceramic Inserts suit super alloy turning operations.

info@productnews.com (ThomasNet News�) — Tue, 19 Feb 2013 08:28:30 -0400

Used for turning applications involving Inconel, Waspaloy, Stellite, and other heat-resistant super alloys, silicon nitride-based WIS10 (Sialon ceramic) and WWS20 with silicon carbide whiskers (Whisker ceramic) are optimized for hardness, heat resistance, and wear resistance. WIS10 suits light roughing to semi-finishing operations, while fracture-resistant WWS20 delivers toughness for turning forged or cast out-of-round workpieces with uneven surfaces or heavy interruptions.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Indexable Inserts | Ceramic Inserts

Face Mill machines iron and steel parts.

info@productnews.com (ThomasNet News�) — Mon, 18 Feb 2013 08:29:32 -0400

Featuring 25° lead angle, DNX 25° FaceMill is available in 3–8 in. cutter diameters and in coarse and fine pitch styles. Negative, square-shaped insert with molded wiper flat achieves up to 8 indexes. With lowered cutting force and V-shaped insert edge, DNX minimizes vibration and provides stable machining experience.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Fasteners and Hardware

Search for suppliers of: Face Mills | Milling Cutters | Machine Tool Inserts

Square Shoulder Milling Cutters handle tough materials.

info@productnews.com (ThomasNet News�) — Wed, 13 Feb 2013 08:34:04 -0400

Featuring precision milled pocket seats and integrated through-coolant channels, Turbo 10 Series includes both direct pressed and ground insert alternatives with corner radii ranging from 0.016–1.122 in. Geometries for ground inserts provide optimized performance in challenging materials, such as aluminum, stainless steels, and titanium alloys. Available in diameters from 0.75–2 in., helical cutters include Weldon, Seco Weldon, Combimaster heads, Seco-Capto, and Arbor mounting options.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Machine Tool Inserts | Inserts | Milling Cutters

Cutters and Inserts feature fine pitch for smooth cutting.

info@productnews.com (ThomasNet News�) — Mon, 11 Feb 2013 08:32:45 -0400

Machined from double-hardened tool steel, 12 mm Cutter Bodies and Inserts are designed with fine pitch for accelerated feed rates and smooth cutting action that minimizes noise and pressure. End Mills come in cutting diameters from 0.625–1.500 in., while Shell mills, with varying pitch options, cut from 1.5–4 in. Helical roughing end mills are available in 1.0 and 1.25 in. diameters, and Utility cutters come in .75, 2, and 3 in. diameters. Maximum depth of cut for 12 mm inserts is 0.430 in.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Fasteners and Hardware

Search for suppliers of: Milling Cutters | Roughing End Mills | End Mills | Machine Tool Inserts

Multipurpose Milling Cutters offer up to 8 indexable positions.

info@productnews.com (ThomasNet News�) — Tue, 29 Jan 2013 08:29:31 -0400

Specifically engineered for titanium and stainless steel applications, KSRM™ Series supports pocketing, profiling, ramping, and plunging with up to 1 mm fz. Inserts are available in 12 and 16 mm dia for KSRM face mills and screw-on, Weldon®, and cylindrical KSRM end mills. SGE styles are designed for medium and heavy milling tasks, while ELE inserts should be used at low cutting forces and to avoid edge build-up. In addition, 20 mm dia insert is available for KSRM face mill models.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Machine Tool Inserts | Metric Milling Cutters | Milling Cutters | Indexable Inserts

Counterboring Insert Geometry delivers optimal precision.

info@productnews.com (ThomasNet News�) — Thu, 17 Jan 2013 08:30:08 -0400

Designed for use with Walter BoringMEDIUM system for 20–153 mm drilled holes and Walter BoringMAXI system for 150–640 mm drilled holes, E47 Counterboring Insert Geometry provides optimized chip breaking and removal properties that result from universal chip groove, positive rake angle, and strong cutting edge with 0° chamfer. Depending on shape of insert and size, depths of cut from 2.5–6.3 mm are possible. Inserts are aimed at material groups ISO P and K as well as ISO M and ISO S.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Indexable Inserts | Counterboring Cutters

25-Pole Inserts work with heavy-duty rectangular connectors.

info@productnews.com (ThomasNet News�) — Thu, 17 Jan 2013 08:30:08 -0400

Used in applications where high volumes of data or signals are transmitted in small space, module CX-25 features 25 Pole MIXO Inserts by ILME. Modular inserts work with MIXO series frame, which lets end-user create custom connector, and can be used individually in single frame or combined with up to 5 other modules in 6-slot frame.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products
Fasteners and Hardware

Search for suppliers of: Rectangular Connectors | Electric Wire & Cable Connectors | Connectors | Wire Connector Electric Inserts

Cutting Tool Inserts cover range of steel turning applications.

info@productnews.com (ThomasNet News�) — Fri, 21 Dec 2012 08:28:33 -0400

Part of Tiger•tec® Silver for Turning Series, RP5 has positive 3° chamfer and wide chip breaker groove that maintains low cutting temperature during roughing. MP5 geometry, with 3-center curve cutting edge, is suited for medium machining of steel. MP3 geometry excels at medium machining on long chip forming steels such as low carbon and forging steels, while FP5, used for finishing operations, features double V chip breaker for chip control during turning operations from 0.008 in. depth of cut.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Portable Tools Sponsored by: Channellock, Inc. - Sweepstakes Ad

Search for suppliers of: Carbide Inserts | Tungsten Carbide Tools | Cutting Tools

Ceramic Inserts optimize high-temperature alloy machining.

info@productnews.com (ThomasNet News�) — Mon, 10 Dec 2012 08:30:54 -0400

Featuring self-reinforced structure of silicon nitride ceramics and optimized chemical stability, WIS10 Grade offers notch wear resistance and excels at machining all types of heat-resistant high temperature alloys such as Inconel, Waspalloy, and Stellite. WWS20 Grade, featuring Whisker fibers, offers fracture and crack resistance and is suitable for nickel-based alloys and difficult conditions, such as machining forged out-of-round workpieces with uneven surfaces.

This story is related to the following:
Fasteners and Hardware

Search for suppliers of: Carbide Inserts | Ceramic Inserts | Silicon Nitride Inserts

Uncoated Grades are suited for die steels manufacturing.

info@productnews.com (ThomasNet News�) — Wed, 05 Dec 2012 08:29:37 -0400

With fracture and wear resistance for high-speed finishing of die steels and bearings, BN1000 exhibits extended life in continuous to light-interrupted cutting. General-purpose BN2000, when machining bearings or die steels, provides stable tool life for continuous to medium-interrupted cutting. Derived from high-purity ceramic binding that optimizes heat resistance while strengthening tolerated cutting force, uncoated grades come in single- and multi-corner type inserts.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Fasteners and Hardware

Search for suppliers of: Carbide Insert Tools | Carbide Inserts

Indexable Milling Inserts include anti-rotation feature.

info@productnews.com (ThomasNet News�) — Tue, 04 Dec 2012 08:30:31 -0400

Available in 3 variable topography styles, Rodeka™ Series provides 12 cutting edges, while Rodeka™ 8 Series features 8 cutting edges and is engineered for turbine blade machining. LD style has honed edge for light to medium machining, while GD style has 10° positive T-land and hone for medium to heavy machining. Designed with 0° T-land and hone, HD styles take on heavy machining tasks. All double-sided inserts are suitable for pocketing, profiling, and face milling.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Fasteners and Hardware

Search for suppliers of: Milling Tools | Face Milling Tools | Indexable Inserts | Index Milling Machinery

Uncoated Inserts target high-speed general purpose milling.

info@productnews.com (ThomasNet News�) — Wed, 28 Nov 2012 08:31:07 -0400

Offering optimal tool life in continuous to light-interrupted cutting, BN1000 Grade provides fracture and wear resistance for high-speed finishing of die steels and bearings. General purpose BN2000 Grade, suitable for machining of hardened steel, provides stable tool life for continuous cutting to medium-interrupted cutting. Available in single- and multi-corner types, both feature high-purity ceramic binding, which maximizes heat resistance while strengthening tolerated cutting force.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Machine Tool Inserts | Milling Cutters | Turning Tools

Milling Inserts have 12 cutting edges, anti-rotation feature.

info@productnews.com (ThomasNet News�) — Tue, 23 Oct 2012 08:39:54 -0400

Optimizing performance for roughing to semi-finishing applications, M200™ series includes 3 geometries designed for multiple milling tasks: ML for stainless steel and high-temp alloys; MM for general purpose milling, including steel; and MH for heavy applications, such as cast iron and high-strength steels. Available milling grades include WK15PM, WP25PM, WU35PM, and WP35CM, while internally cooled tool bodies come in screw-on, Weldon®, cylindrical, and shell mill styles.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Inserts | Mills | Finishing Mills

Indexable Inserts are optimized for grooving, cutoff jobs.

info@productnews.com (ThomasNet News�) — Tue, 21 Aug 2012 08:30:14 -0400

Indexable grooving and cutoff inserts are available with Tigerotec® Silver PVD aluminum oxide coating, which offers high-temperature wear resistance to promote tool life. Optimized surface structure lowers friction on cutting surface; sharp, defined cutting edges can be achieved due to coating's thinness; and smooth surface helps prevent build-up on cutting edge while promoting process reliability. Four grades - WSM13S, WSM23S, WSM33S, and WSM43S - accommodate range of applications.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Fasteners and Hardware

Search for suppliers of: Grooving Tools | Indexable Inserts | Cut-Off Bits

Ball Nose Inserts feature PCD tips for wear resistance.

info@productnews.com (ThomasNet News�) — Mon, 16 Jul 2012 08:26:52 -0400

Designed for use with Dapra standard steel, carbide-core, and carbide-shank cutter bodies, Ball Nose inserts with PCD tips are precision-ground to provide sharp, accurate cutting radius. Diamond-tipped inserts exhibit wear resistance that lends to extended tool life in milling soft, non-ferrous materials, such as aluminum and graphite. Available diameters include 3/8, ½, and ¾ in.

This story is related to the following:
Portable Tools Sponsored by: Channellock, Inc. - Sweepstakes Ad
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Cutting Tools | Carbide Inserts | Milling Cutters | Diamond Inserts

Light Cutting Insert enhances gear milling operations.

info@productnews.com (ThomasNet News�) — Mon, 11 Jun 2012 08:29:49 -0400

Suited for smaller gear milling machines, including CoroMill® 170 precision gear milling cutter, -PL geometry flank insert utilizes grade GC1030 and features positive chip breaker that minimizes unwanted cutting forces and vibration. This lends to reduced power consumption or ability to run accelerated and extended cycles. Working in steel application area, typ operations include rough milling of internal/external gears as well as machining of gear wheels in 12-22 module range.

This story is related to the following:
Fasteners and Hardware
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Machine Tool Inserts | Milling Cutters | Gear Cutters | Cutters

Quick Connect Adapters, Sanitary Inserts target biopharmaceutical manufacturering.

info@productnews.com (ThomasNet News�) — Fri, 06 Apr 2012 08:39:39 -0400

Offered in polycarbonate and polysulfone, MPC and MPX back-to-back body adapters enable end-users to connect off-the-shelf, single-use systems that feature male coupling inserts. Being able to combine differing inserts also provides reducing option for users who need to transition between tubing with diameters from 1/8-½ in. Available in polysulfone material, MPC and MPX ¾ and 1½ in. sanitary inserts allow connections to equipment or single-use systems that feature sanitary fittings.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: PARKER / AUTOCLAVE ENGINEERS FCD - mobile banner
Fasteners and Hardware

Search for suppliers of: Quick Connect/Disconnect Couplings | Adapters | Inserts