ThomasNet Industrial Newsroom -

Linear Guide Ball Bushings are optimized for smooth motion.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:44:53 -0500

LG bushings employ rotation prevention function, where 4 rows of circular arc grooves are arranged on shaft, to ensure precision movement. Product is dimensionally interchangeable with linear bushing, as outer tube has same OD. Since outer tube and shaft are interchangeable, combination of outer tube and shaft may be selected. Tube OD ranges from 8-15 mm, with tolerances from 0 to -0.011, while tube lengths range from 12-30 mm, with tolerances from 0 to -0.2 and shaft ODs from 4-8 mm.

This story is related to the following:
Mounting and Attaching Products
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Bushings

Taper Bushings will not mar shafts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:35:59 -0500

Designed to fasten rotating components without marring shafts, QTM-BSS Series are available in 18 sizes to fit shafts ranging in diameter from .157-.787 in. Their outer diameters range from .315-1.102 in. and they are constructed of stainless steel.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Stainless Steel Bushings | Shaft Bushings

Open Bushings provide smooth holes for cables.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:33 -0500

PGSB-A Series open bushings convert raw or sharp edged holes into smooth, insulated holes. Snapped into hole by hand, they insulate and protect wires and cables, and split design allows assembly into holes already containing cables. RoHS-compliant bushings are available in 14 sizes to accommodate various hole diameters and panel thicknesses.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Insulating Bushings | Snap Bushings

Hydraulic Shaft Locking Bushings suit automated systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Mar 2008 07:40:56 -0500

Model ETP-Octopus(TM) bushings can be set up for frequent locking/unlocking of linear slides or similar motion devices at one or series of positions from remote switching location. Providing uniform and repeatable locking pressure, they are designed for use with sliding shafts and components in automated systems. Devices are available in 3 models with pressure ranges to 6,500 psi and with aluma-bronze or steel sleeve bores, ranging from 10-100 mm.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Shaft Bushings | Hydraulic Positioners | Shaft Locking Devices

Linear Bushings are self-lubricating.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Mar 2008 07:38:50 -0500

Offered in single or double bushing lengths with either flangeless, round, square, or compact mini-flanged styles, Self-Lubricating Linear Bushings are made of 52100 bearing steel with Duracone M90 or equivalent resin pad cases and retainers and Nitrile rubber seals. Integral fiber pad delivers lubricant to shaft surface through capillary action, maintaining constant lubricating film between ball bearing and shaft. RoHS-compliant products are rated for operation in -20 to +80ºC temperatures.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Flanged Bushings | Steel Bushings | Self-Lubricating Bushings

Strain Relief Bushings can be preassembled.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Feb 2008 07:43:21 -0500

Model RDD-601 Lockit(TM) Strain Relief Bushing fits round cables up to .700 in. and panel mounting holes up to 1.109 in. w/1.000 in. flats. Unit can be preassembled onto round or flat cables for final panel assembly or at any remote location, and can also be installed into standard Double D panel hole with simple fingertip pressure. Multiple panel locking steps secure unit into range of panel thicknesses, and available matching plugs can be used to fill blank/unused mounting holes.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Strain Relief Bushings

Shaft Locking Bushings minimize runout and vibration.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Feb 2008 07:41:53 -0500

Offered in sizes from 5/8-2 in. and 15-80 mm with torque ranges from 39-12,538 lb-ft, ETP Express® Bushings provide precise connection between keyless shafts and mounted components. RoHS-compliant units have less than .0008 in. runout, minimizing vibration and noise. Bushings feature double-walled hardened steel sleeve and flange filled with actuating pressure medium. When tightened, radial screw actuates piston to compress medium, creating solid connection between shaft and hub.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Shaft Bushings | Keyless Bushings

Bushings eliminate strain on round or flat cables.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jan 2008 07:33:21 -0500

Available in right angle configuration, RDD Lockit(TM) Strain Relief Bushings are suited for 90° strain relief applications through panels. Units can be pre-assembled onto round or flat cables offline for final panel assembly at later time, or at remote location. Bushings are also designed to install into standard normal or Double D panel hole with fingertip pressure. Multiple panel locking steps secure stain relief into range of panel thicknesses.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Strain Relief Bushings

Cylindrical Bushings offer application flexibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Dec 2007 07:50:21 -0500

Designed for use mainly under high-duty, oil-lubricated conditions, DP4 series offers static and dynamic friction coefficient that lends to optimized wear resistance. Design also resists cavitation and flow erosion damage of polymer bearing surface by lubricant. While able to be used in sliding, oscillating, reciprocating, and rotating applications, products also work with non-lubricating fluids and in light-duty, unlubricated applications.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Corrosion Resistant Bushings | Abrasion Resistant Bushings

Bushings suit linear motion applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Oct 2007 08:14:55 -0500

Load carrying capacity of Super Smart(TM) Ball Bushing(TM) results from combination of 4 hardened bearing-quality steel components. Steel outer ring lets bearing maintain its diametrical fit-up, even when installed in housing slightly out-of-round, and finished double track bearing plate features universal self-alignment. Along with precision-ground balls, products feature 60 Case LinearRace(TM) shaft (inner race), with under 4 mm roundness, 0.05 mm straightness, and 60-65 HRC hardness.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Steel Bushings

Clamps, Plugs, and Bushings suit commercial construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jul 2007 07:50:42 -0500

Made of fire-rated plastic, AMP Connector Clamps secure and install nonmetallic sheathed cable to steel boxes or panels. Units accommodate 1 or 2 wires, are rated for 60 lb pull-out, and are available for ½ or ¾ in. knockout holes. Designed for plugging unused knockouts in boxes or panels, AMP Plugs fasten securely to any round open hole from ½-2 in. Offered in round or square, AMP Stud Bushings provide relief for wire pulling and prevent chaffing of wire insulation.

This story is related to the following:
Packaging Products & Equipment
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Material Handling and Storage

Search for suppliers of: Knockout Plugs | Hole Plugs | Strain Relief Bushings | Cable Clamps

Rubber Rings and Bushings provide noise suppression.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Oct 2006 07:58:16 -0500

Providing protection for loads ranging from 4-350 lb, A10R 4- Finger-Flex Series exhibits various natural frequencies depending on size and durometer hardness of isolator, which ranges from 30-60. Sizes include 13/16, 1 11/64, 1 3/8, 1 29/32 and 3 in. diameters with ¼, 3/8, 3/8, 9/16, and 5/8 in. bores, respectively. Units provide noise suppression in typewriters, printers, copiers, and other precision office or lab equipment.

This story is related to the following:
Material Handling and Storage
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Noise Suppressors | Rubber Bushings | Rubber Rings

Custom Bushings suit thin-panel applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 14 Jun 2006 07:51:07 -0500

Featuring one-finger locking mechanism, Single-Panel-Thickness RDD Lockit(TM) fills electrical cord openings and provides strain relief against wire twisting and pulling for thin-walled furniture-mounted task-lighting units and other electrical products. Bushings, molded of high-impact polyamide nylon, conform to ASTM standard D-4066-PA111, have flammability classification of 94V-2, and withstand temperatures to 105°C.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Strain Relief Bushings | Thin Wall Nylon Bushings

Ball Bushings suit commercial/industrial applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Apr 2006 08:07:30 -0500

SMK Series inch and metric linear ball bushings have self-alignment feature that allows up to 0.5° variation. Interchangeable with standard dimensional ball bushings, options include pillow blocks, end supports, rail supports, and RC 60/440 SS shafting. Ball bushings are also available with corrosion resistant, washdown, FDA-approved coating for applications in food, beverage, pharmaceutical, and semiconductor industries.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Self-Aligning Bushings | Metric Bushings

Linear Bushing offers self-adjusting capabilities.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Apr 2006 15:43:15 -0500

Interchangeable with conventional linear bushings, Power Linear Bush is engineered with cages made of synthetic resin that continually lubricates rolling elements. It exhibits smooth, quiet motion due to construction of ball retainer and outer sleeve. Convex shape of ball plate provides pivot point at center, allowing self-adjustment capability up to 0.5° that eliminates possibility of edge pressure caused by inaccurate machining, mounting errors, or shaft deflection.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Self-Lubricating Bushings | Self-Aligning Bushings

Self-Locking Bushings offer wire and cable strain relief.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Mar 2006 12:58:02 -0500

Designed for flat wires and cables ranging from 0.12 x 0.32 in. to 0.24 x 0.42 in., RDD Lockits(TM) fit into Double D holes, protecting current-carrying wires from twisting and other stresses that can cause electrical failure. Units and cord sub-assembly snap into place without any tools other than electrical pliers. Five-step locking mechanism allows range of panel thicknesses up to .157 in. and exceeds strain relief requirements of UL 35 lb pull test.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Strain Relief Bushings

Keyless Bushings handle torque from 40-6,400 lb-ft.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jan 2006 07:05:22 -0500

Providing frequent mounting/dismounting capabilities with one radial screw, ETP Express Bushings position and lock all types of gears, pulleys, sprockets, and other components in power transmission system. Units provide accurate mounting without axial movement of bushing along shaft and help provide runout control to minimize vibration and noise. Offered in full range of metric sizes, bushings offer concentricity to .001 in. TIR and are suited for tight areas.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Shaft Bushings | Metric Bushings | Keyless Bushings

Sleeves and Bushings offer concentricity without adjustment.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Dec 2005 07:05:17 -0500

Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from .128-1.260 in., accommodate 12 tool bit sizes from 1/8-1¼ in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mechanical Components and Assemblies

Search for suppliers of: Split Bushings | Square Hole Sleeves

Splines and Splined Bushings fit shafts from 11/32-3/4 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Dec 2005 07:07:23 -0500

Splines, offered as carbon steel C-12L14 Series A 1C25 or stainless 416 annealed A 1Y25 Series, permit sliding between mating members in axial direction. Shafts contain 16 external spline teeth, and stock lengths of splined shafts range from 1-6 ft. Splined bushings contain 16 internal teeth and are offered as carbon steel A 1C26 Series or stainless 416 annealed A1Y26 Series. Bushing ODs range from .625 in. to 1.500 in., and bushing lengths range from .40-1.5 in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Stainless Steel Bushings | Steel Splines

Snub Bushings protects cable from rough panel edges.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Aug 2005 08:59:06 -0500

SC Snub Bushing series protects cable bundles from rough panel edges and provides light strain relief. With flexible inside diameter, users can slide cable into grommet and press part into mounting hole. Interior diameter material closes firmly against cable. Parts accommodate 1/32, 1/16, 3/32, and 1/8 in. panel thicknesses. Available in 3 sizes of cable holding diameters from 1/8-¼ in., parts come in black, RoHS-compliant, nylon 6/6 material.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Strain Relief Bushings | Nylon Bushings