ThomasNet Industrial Newsroom -

Screw Anchors have thread design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 18 Sep 2008 07:40:17 -0500

Requiring minimal installation torque, Tapper+ screw anchors are tested to meet 2006 International Building Code (IBC) requirements for strength design of anchors in uncracked concrete. Hex Head and Flat Head styles are available in sizes from 3/16-¼ in. and 1¼-6 in. long for use in light- to medium-duty fastening applications involving concrete, block, and brick base material. Use results in neat finished appearance.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Screw Anchors | Anchor Fasteners

Cordless Screw Gun is lightweight and ergonomic.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:08 -0500

Weighing 5.1 lb and featuring 2-piece ergonomic design, Model PC-12 Cordless Screw Gun is 14 in. long, and is suited for remodeling punch-out jobs when corded tool is inconvenient or electric power is not available. Suited for professional remodelers and contractors for variety of drywall, assembly, and other applications, gun accommodates 1-2 in. fasteners and up to 600 screws per battery charge.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Portable Tools

Search for suppliers of: Industrial Guns | Screw Anchors | Captive Fasteners | Cordless Tools | Drywall Tools

Anchoring System aids terra cotta repair and attachments.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:04 -0500

CINTEC Design Anchor System stabilizes and strengthens terra cotta structure. Main steel body of anchor is surrounded by fabric sock. Anchor is placed in oversized drill hole joining materials to be anchored together, fluid grout is injected under pressure through middle of anchor. When it reaches remote end, it passes through flood holes into fabric sock, inflating assembly. System has 2-hr plus fire rating and can be installed to be invisible.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Wall Anchors | Masonry Anchors | Building Anchors

Overhead Anchor meets IBC requirements for strength design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Mar 2008 07:41:08 -0500

SNAKE(TM)+ overhead anchor sets into drilled hole and is tightened with ½ in. impact wrench until flush with ceiling and ready for insertion of threaded rod. Mechanical anchor combines internally threaded body, Powers Wedge-Bolt anchor, and deep-cutting thread design.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Concrete Anchors

Concrete Anchor delivers IBC-compliant holding power.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Mar 2008 07:49:46 -0500

Featuring one-piece stainless steel clip design, Power-Stud(TM)+SD2 carbon steel bolt is designed for use as mechanical anchor in concrete and other masonry applications. This fully threaded, wedge anchor meets International Building Code (IBC) requirements for strength design (cracked concrete). Bolt is available in 3/8, ½, 5/8, and ¾ in. diameters and various lengths from 3-8½ in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Concrete Anchors | Carbon Steel Bolts

Masonry Anchor provides permanent structural reinforcement.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jan 2008 07:52:29 -0500

Able to be tailored to requirements of individual projects, Anchor System stabilizes and strengthens non-reinforced masonry structures without requiring external or internal steel bracing. Solution is comprised of steel section in mesh fabric sleeve, into which cementitious grout is injected. Flexible woven polyester sleeve restrains flow and molds anchor into shapes and spaces within wall, providing strong mechanical bond. Solution delivers permanent repairs, even in weak substrates.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Masonry Anchors

Mechanical Tubing Anchor Catcher is fully retrievable.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Nov 2007 07:43:18 -0500

Furnished with standard 50,000 lb secondary release shears (value-changeable in field), RODEC(TM) Model A anchors tubing string in tension or compression in wells of any depth. Double-grip anchor prevents vertical movement of tubing string during pumping operations, simultaneously promoting pump efficiency while minimizing rod wear. Released by left hand rotation, solution features emergency shear release and drag blocks for setting and releasing control.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Tubing Anchors | Anchors

Anchor Point is designed for fall arrest system.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Oct 2007 07:52:20 -0500

Using elements such as doors or windows, Door/Window Jamb Anchor is compressed against door or window frame jamming itself between 2 vertical sides. Weighing just over 6 kg, anchor can be moved between jobs. Combined with harness, shock absorbing lanyard, or self-retracting lifeline, it provides efficient fall protection and height safety system. Non-penetrating anchor point is suited for use during initial residential or commercial construction, as well as for post-construction needs.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Safety and Security Equipment

Search for suppliers of: Anchor Points | Fall Arresters | Fall Arrest Systems | Fall Protection Devices

Rotator Cuff Suture Anchor offers adjustable tension.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Oct 2007 07:35:36 -0500

KINSA RC 5.5 Suture Anchor encases sliding, self-locking knot that permits surgeon to perform secure repair procedure without tying knots on top of tissue. Minimally invasive solution enables low-profile torn tissue reattachment without interfering with joint motion. Suited for double-row fixation, anchor is tapped into bone surface and seated with final twist. Product measures ½ in. long, is made from implantable PEEK-OPTIMA® polymer, and will not show up on X-rays or distort MRIs.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Health, Medical and Dental Supplies and Equipment

Search for suppliers of: Anchors | Surgical Implants

Drywall Anchors hold up to 75 lb.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Aug 2007 07:40:12 -0500

Made with fiber-reinforced resin, E-Z Anchor® Twist-N-Lock(TM) Anchors install flush against drywall to ensure that item hung lies flat and does not wobble. Split-and-grip technology let user know with audible click that anchor is locked into wall. Click indicates that anchor legs have split and are compressing drywall, reinforcing installation. Eliminating need for pre-drilling, anchors are suited for hanging mirrors, clocks, shelving, blinds, and curtains.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Wall Anchors

Roof Top Anchor helps prevent falls and structural damage.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 May 2007 07:39:31 -0500

DBI-SALA Permanent Roof Top Anchor features load distributing system that forces stanchion to tip over when fall-arrest level forces are exerted on it. This directs arresting forces to base and fasteners, ensuring safety of worker and preserving integrity of roof structure. Same design also allows anchor to be attached to approved roof structures without needing to fasten it to structural member. Solution works with any kind of corrugated metal or wood sheathing rooftops.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Safety and Security Equipment

Search for suppliers of: Fall Arresters | Fall Arrest Systems | Fall Protection Devices | Building Anchors

Panel Anchors/Reinforcing Strips are made of rigid plastic.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Feb 2006 07:04:20 -0500

Measuring 16 x 1¾ in., Kreuz panel anchor is pre-molded into L-shaped configuration to facilitate installation. Guideway lets Kreuz reinforcing strips or traditional wire reinforcing slide into it, joining 2 components together. Offered in 1 ft lengths, each reinforcing strip features male and female ends, and any number of strips can be connected together. Anchors and reinforcing strips are made from impact- and fatigue-resistant plastic that retains stiffness and flex.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Masonry Anchors

Adhesive Anchor suits wide range of base materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Nov 2005 07:04:31 -0500

Suited for oversized holes up to ¼ in. larger than rod diameter, HIT HY 150 MAX Chemical Anchor is packed in dual-fill containers, and features mixer helix and connector, which minimize dispensing forces and optimize mixing quality. Virtually odorless, product is suited for solid base materials such as concrete, grout-filled block and stone, as well as hollow block and brick. Temperature range is 14-104°F.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Adhesive Anchors

Embedment Anchor provides alternative to hooked rebar.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 Sep 2005 07:12:30 -0500

Based on Shear Cone Theory, LENTON® TERMINATOR oversized half coupler secures to end of reinforcing steel and permits rebar to be added without increasing size of component embedded in concrete. Mechanical system minimizes embedment length and facilitates installations. Able to simplify bar placement and reduce rebar congestion by 60%, product utilizes LENTON taper-threaded end and is designed for use on any type of rebar, size No. 4-18 (12-57 mm).

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Concrete Anchors

Anchor Drive Installation Kit enables one-handed operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Sep 2005 09:27:51 -0500

Anchor Drive Installation Kit provides users with all SDS-plus? kit that facilitates installation of medium- to light-duty anchors in concrete. It eliminates need to change back and forth between drill and driving bits with 5-13/16 in. sleeve that locks into place over 5/32 or 3/16 x 7 in. SDS-plus Tapcon Hex Bits and accepts driving bit on opposite end. Kit also includes Phillips Bit Holder, 5/16 in. socket, No. 2 and 3 Philips? Iso-Temp? Bits, and allen wrench.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Portable Tools

Search for suppliers of: Tool Kits | Concrete Anchor Installers | Concrete Anchors

Arch Framing Tool suits doorway and window applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Aug 2005 08:40:35 -0500

Designed to facilitate process of framing arches for builders, Flex-C Arch utilizes technology of Flex-C Trac® and Flex-C Plateâ"¢ systems, which provide flexible metal track or plate for use with wood or metal studs. Product can be shaped by hand and can be formed ahead of time or at jobsite. Standard sizes are 2 x 4, 2 x 6, 3.625, and 6 in. Additional sizes include 2.5, 4, 2 x 8, 2 x 10, and 2 x 12 in. Standard lengths are 5 and 8 ft.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Framing Anchors

Locking System keeps outdoor light poles upright.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Apr 2005 08:30:30 -0500

Beacon Sure-LOKâ"¢ System affixes high-mast aluminum and other outdoor area and street lighting poles to their bases without breakable welds. Multi-piece concealed locking system keeps poles and bases together even during high-winds, street vibrations, or pole/vehicle collisions. If pole has to be changed or removed, product can be unbolted and reused there or elsewhere. System is comprised of faceplates, tenons, base plate, and washer plate.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Lighting Fixtures | Anchors

Mechanical Anchor features wedge design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Feb 2005 07:41:04 -0500

Ranging from ¼â�"1 in. diameter, Kwik Bolt 3 comes in electrogalvanized carbon, hot-dipped galvanized, SS 304 and SS 316. Standard thread length bolt is suited for high shear applications, and long thread length bolt provides application flexibility in all environmental conditions. Dog point impact section helps prevent thread damage during installation, while rounded end facilitates anchor insertion, and wedge design enables shallow embedment depths.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Wedge Anchors | Screw Anchors

Self-Piercing Fasteners target automotive applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Jan 2005 07:54:50 -0500

Available in strip or coil-form, Piercetekâ"¢ Pierce Nuts and Self-Piercing Anchor Platesâ"¢ range from 4â�"10 mm. Suited for automotive applications, units self-pierce sheet metal panels and mechanically stake fasteners into position in one continuous operation. Optional thread masking and various finishes are available.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Transportation Industry Products

Search for suppliers of: Automotive Fasteners | Anchor Plates

Anchor System helps repair existing buildings.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 May 2004 07:43:49 -0500

Reinforcing Anchor System process starts with inspection of structure by CINTEC engineer. Structure is then modeled in 3D to assess behavioral probability and risk inherent to structure to determine best reinforcement pattern. Fashioned out of steel bar enclosed in mesh fabric sleeve, anchor system is inserted into structure in need of reinforcement. Non-polymer, cement-like grout is injected into sleeve and shapes itself around steel to fit space.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Masonry Anchors