ThomasNet Industrial Newsroom - Fasteners & Hardware

Battery Straps connect 9 V batteries in series or parallel.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:53 -0500

Available in T or I configurations, Insulated Battery Straps are made of molded Polyethylene or rigid fiber which incorporates insulators and sturdy Phosphor Bronze or Spring Steel, Nickel-plated, snap-on connectors. They feature soldered-in #26 AWG red and black wire leads in lengths of 4.00, 6.00, and 8.00 in. each vinyl covered, and 4.00, 6.50, and 8.00 in. each fiber covered. Shielded types, which reduce short circuit and contact tampering potential, are also offered.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Battery Straps | Battery Connectors

Door Latch offers up to 12 mm compression.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:50 -0500

Featuring 22 or 28 mm high roller cam that has 180° rotation range, 1-081SL Compression Latch offers up to 12 mm compression range which can be modified depending on length of cam. D-SNAP Technology enables fast installation without hardware or tools, while Design Symmetry technology allows same latch to be installed on both right- and left-hand doors. Meeting IP65 requirements for water and dust resistance, latch can be actuated with standard inserts.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Plant Furnishings and Accessories

Search for suppliers of: Door Latches | Door Hardware

Self-Drilling Screws can cut through sheet metal.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:57 -0500

Incorporating technology used to form threads and points of screws resulting in sharp cutting edges, Grip-Kwick(TM) self drilling screws bite into sheet metal quickly and cut clean hole in base material. They also utilize technology used for placement of metal forming serrations on underside of screw head, which creates locking capability for screws. Available in diameters from #8 to #¼, units are suited for HVAC, white goods, sheet metal assemblies, and stitching screw applications.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Self-Drilling Screws | Tapping Screws

Insert Grade mills hardened steels.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:49 -0500

For wear resistance necessary to mill hardened steel, GC1010 features thin PVD coating combined with fine-grained hard substrate, providing sustained surface finish and tight tolerances during long cutting cycles. Insert excels in processes ranging from roughing to finishing of tool steels, ISO-H hardened steels, and ISO-P steels. It can also be used to optimize productivity in finishing of ISO-K cast irons.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Wear Resistant Inserts | Machine Tool Inserts

Captive Screws are offered in lengths from 8-40 mm.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:27 -0500

Available from sizes M3 to M8 as standard in varying lengths 8-40 mm, stainless steel captive screws are suited for applications requiring frequent screw attachment and removal. Screws do not fall when tightened into panel or when removed from frame.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Captive Screws | Stainless Steel Screws

Ceramic Fasteners offer continuous use at 1,500°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:25 -0500

Providing electrical insulation and resistance against heat and chemicals, Alumina Ceramic Fasteners may be used in hot water and chemical pumps as well as electronic applications such as electrical transformers and computer equipment. Ranging in size from M3-M10, fasteners include slotted flat fillister head machine screws, hexagon headed bolts, and hexagon and Dihedral nuts.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Machine Screws | Ceramic Fasteners | Hexagon Head Bolts | Hexagon Nuts

Tamper-Evident Seals, Closures enforce ballot box security.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:30 -0500

Used for tamper-evident and security applications, Model PSW-97 plunger seal locks come pre-numbered with 7 sequential digits and 12 in., 3-Ply galvanized wire (pre-inserted or loose). High security tamper evident self-locking plastic seal, designed for use with wire, is made with styrene or acetate plastic with stainless steel locking plunger and supplied with lettering and numbering. All colors available, including clear.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Safety and Security Equipment

Search for suppliers of: Wire Seals | Tote Box Seals | Tamper-Evident Seals | Security Seals | Plastic Seals | Metal Seals | Custom Seals | Container Seals | Security Locks | Keyless Locks | High Security Locks

Biometric Door Locks deliver keyless security.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:25 -0500

Available in lever (ADA approved) and knob styles, Biometric locking system delivers functionality based solely on thermal imaging of user's fingerprint to eliminate concerns over forgotten, lost, or stolen keys. Product can also be set to unlocked mode during times when open access is desired. Suited for commercial buildings, system offers administration and audit control capabilities as well as built-in LCD that facilitates enrollment/deletion of up to 1,000 users.

This story is related to the following:
Safety and Security Equipment
Automatic ID
Controls and Controllers
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Biometric Security Systems | Biometric Devices | Biometric Access Control Systems | Door Locks

Barcoded Security Labels have tamper-evident seal.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:26 -0500

Supplied on rolls and sequentially numbered, LabelZon security labels have writable surface, are tamper-evident and self-voiding, and cannot be resealed. Hidden Message is revealed, typically VOID or OPEN, if opened and re-seal is attempted. Tell-tale adhesive residue is also left on application surface for further evidence. Applications include warranty seals for computers, envelope seals for sensitive correspondence, election machines, ballot boxes, and containers.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Labels, Tags, Signage and Equipment

Search for suppliers of: Homeland Security Equipment & Supplies | Tamper-Evident Label Seals | High Security Seals | Barcode Seals | Tamper-Evident Labels | Security Labels

Screws, Nuts, Washers withstand high-temperature conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:37 -0500

AURUM(TM) cross recessed pan head, socket head cap screws, hexagon nuts, and washers are made of AURUM thermoplastic polyimide resin. Brown in color, material exhibits heat resistance that enables continuous use at 240ºC and clean characteristics that ensure outgas is reduced to microscopic levels. Amounts of metallic impurities, such as alkali metal, are also reduced to microscopic levels. UL 94V-0 flame resistant material is also resistant to chemicals, plasma, radiation, and abrasion.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Socket Head Cap Screws | Recessed Head Screws | Hexagon Nuts | Screw Washers

Hall-Effect Latches suit non-automotive applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Jun 2008 07:22:15 -0500

Offered in reverse battery protected packages, temperature-stable and stress-resistant latches have dynamic offset cancellation that reduces residual offset voltage. On single silicon chip, Models A3290 and A3291 include Hall-voltage transducer, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit protected open-collector output to sink up to 25 mA. Onboard regulator allows operation with 4.2-24 V supply voltages with -40 to 125°C operating temperatures.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Magnetic Latches | Hall-Effect Switches | Hall Effect Sensors

Pushbutton Locks can be installed on most aluminum doors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:36:05 -0500

Including DL1200, DL1300, and PDL1300 versions, Narrow Stile Exit Device Trim Pushbutton Locks are designed with all-metal, vandal-resistant 12-button keypads that support 3-6 digit PIN codes, and multilevel user hierarchy. Compatible with Jackson, Dor-O-Matic, Von Duprin, Dorma, Arrow, and DCI & Corbin panic devices, they offer keyless access, audit trail capability, and help protect storefronts and managed properties. DL1300 and PDL1300 feature scheduling and time zone capabilities.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Keyless Locks | Door Locks | Pushbutton Combination Locks | Security Locks | Store Door Locks | Vandal Resistant Locks

Double-Sided Lock features LED and audible entry indicators.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:36:04 -0500

DL5200 standalone pushbutton cylindrical lock is 100% keypad programmable with multi-level security supporting up to 100 users, 10 managers, and 3 one-time service codes. Unit retrofits cylindrical lever-sets using slightly modified ANSI A115 Series Prep. With override feature that includes key in knob cylinder, lock runs average of 80,000 cycles with 5 AA batteries. For outdoor use, it comes in weatherproof model outfitted to withstand temperatures of -35 to 66°C.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Security Locks | Cylinder Locks | Pushbutton Combination Locks

Cabinet Locks feature corrosion-resistant design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:35:59 -0500

Surface mounted or mortised, ABLOY® Cabinet Locks are adjustable from key-removable in locked position only to key-removable in both locked and unlocked positions. ABLOY® EXEC key series restricts key duplication to authorized personnel. Resistant to wear, dirt, moisture, corrosion, and freezing, locks are suitable for all types of weather. Virtually pickproof, spring-free construction prevents locks from theft as well as jamming and ensures smooth operation.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Cabinet Locks

Taper Bushings will not mar shafts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:35:59 -0500

Designed to fasten rotating components without marring shafts, QTM-BSS Series are available in 18 sizes to fit shafts ranging in diameter from .157-.787 in. Their outer diameters range from .315-1.102 in. and they are constructed of stainless steel.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Stainless Steel Bushings | Shaft Bushings

Internal Bolt secures and helps insulate doors.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Jun 2008 07:40:45 -0500

Engineered to accommodate exterior and non-stationary doors, Tri-Bolt® can be used in tandem with deadbolt lock to help withstand burglary attempts and severe storms. Design creates tight bond with door's current weather-stripping, insulating interior spaces to conserve heating/cooling effort. Placed at top of door, product cannot be seen from outside.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Deadbolt Locks | Door Locks

Insert features Han-Quick Lock® termination technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jun 2008 07:43:41 -0500

Providing safety for extreme applications in industry and transportation, Han® 4 A insert includes Han-Quick Lock® connection technique that facilitates termination without need for any special tool. Insert offers vibration secure connection.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Interconnect Devices | Wire Connector Electric Inserts

Electronic Lock System suits retail display cases/cabinets.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jun 2008 07:43:40 -0500

Providing accountability and key control, CyberLock® system reduces incidences of internal theft and provides users with complete control over who can access their display cases. It consists of electronic lock that cannot be compromised by any conventional lock-picking methods, and electronic key that cannot be duplicated. Each time electronic key opens lock, record of opening is stored in both lock and key providing detailed audit report of openings and denied entries.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Controls and Controllers

Search for suppliers of: Cabinet Locks | Access Control Systems | Electronic Locks

Wing Nuts are made of stainless steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:56 -0500

Offered in blank, tapped, and tapped through hole versions, Wing Nuts have hot stamped, matte shot-blasted finish. They feature slight dimple on ends to permit better grip and provide increased finger contact area. For certain minimum quantities, blank version can be tapped or reamed in inch or metric sizes to meet customer requirements.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Hardware | Wing Nuts | Stainless Steel Nuts | Blank Nuts

Turning Inserts target stainless steel applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 May 2008 07:43:50 -0500

Developed for KENNA PERFECT turning system, UP Turning Inserts provide soft cutting action and large rake angle, which minimizes cutting resistance, optimizing surface finish on parts and extending tool life. Geometry optimizes resistance to depth-of-cut notching. Available in KC9225(TM), KC9240(TM), and KC5010(TM) grades, inserts are recommended for medical and food industries as well as flange manufacturing, chemical industry, and oil and petrochemical businesses.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Machine Tool Inserts