ThomasNet Industrial Newsroom -

SMD Crystal Clock Oscillators offer supply voltage of 1.2 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Dec 2008 07:50:01 -0600

Utilizing LVCMOS logic, EB17E2 Series of miniature surface mount oscillators provide frequency stability to 25 ppm over operating temperature range of -40°C to +85°C. Measuring 2.5 x 3.2 mm, RoHS compliant units can operate with 0.9 V input voltage in frequency range of 1.8432-50 MHz. They are suited for applications in handhelds, portable devices, and memory products.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Clock Oscillators | Surface Mount Oscillators | Crystal Oscillators

VCO suits digital radio equipment and base stations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Nov 2008 07:45:49 -0600

Operating from 2,269-2,580 MHz with control voltage range of 0.5-16 V, CVCO55CC-2269-2580 VCO (Voltage Controlled Oscillator) features typical phase noise of -107 dBc/Hz @ 10 KHz offset and typical output power of +5.0 dBm. It comes in 0.5 x 0.5 in. SMD package, accepts 8 V input, and has max current consumption rating of 35 mA. Respectively, pulling and pushing are minimized to 3.00 MHz and 0.50 MHz/V, and typical second harmonic suppression is -20 dBc.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

TCXO suits low jitter clocking for mobile RF applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Nov 2008 07:45:43 -0600

Ultra-low frequency oscillator, Model T124 series TCXO provides low frequency squarewave output between 650 Hz to 1.25 MHz, with temperature stabilities down to ±0.3 ppm over -40 to +85°C. Power saver unit is available at 3.3 V input voltage with or without Electrical Frequency Control.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Low Frequency Module Oscillators | Temperature Compensated Crystal Oscillators (TCXO) | Square Wave Module Oscillators | RF Oscillators

Crystal Oscillator offers holdover stability.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Nov 2008 07:45:37 -0600

Available in 28 x 36 x 19 mm package with supply voltage of 12 V, Model DX-170 features temperature stability of 0.2 ppb over 0-70°C or 0.4 ppb over -20 to 70°C, and long term aging of 25 ppb/year. Double oven controlled crystal oscillator is available with either HCMOS or sinewave output and is suitable for telecom, measurement, and military applications.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Crystal Oscillators

Feature-Rich VCSO suits wireline and wireless networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Nov 2008 07:45:26 -0600

Supplied in 5.0 x 7.5 x 2.5 mm LCC package, VS-705 single rate voltage-controlled SAW oscillator (VCSO) meets needs for high-frequency precision clocking. Flexibility lets engineers select +2.5 or +3.3 V power supplies, output logic types, and Absolute Pull Ranges up to ±100 ppm. Along with 125 MHz to 1 GHz operating range, VCSO offers output enable logic that can be configured for Enable High/Low as well as 2 oscillator gain options available for optimization of PLL.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

Low-Power SSXO simplifies EMI compliance in electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Nov 2008 07:45:25 -0600

With power supply requirement of less than 10 mA and EMI emission reduction, M-Series Spread Spectrum Crystal Oscillator (SSXO) is suited for use as timing solution for applications that need to control EMI resulting from memory access. It operates in 16-66.667 MHz range and can be powered from 2.5 or 3.3 V supply. Options include modulation control, allowing either center spread with spread ratio up to +/-1.15% or down spread with options for spread ratio up to -2.3%.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Crystal Oscillators

VCO operates from 4,267 to 4,442 MHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Nov 2008 07:14:43 -0600

Available with control voltage range of 0.1-16 V, CVCO55CC-4267-4442 VCO suits aplications in digital radio equipment, fixed wireless access, and base stations. Features include phase noise of -104 dBc/Hz at 10 KHz offset, pulling and pushing minimized of 3.00 MHz and 0.50 MHz/V, respectively, and second harmonic suppression of -20 dBc typ. Output power of oscillator is typically +5.0 dBm with input voltage of 8 V, and max current consumption of 40 mA.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

OCXO suits base station and SDH/SONET applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Nov 2008 07:14:33 -0600

Designed for wireless and telecom industries, C4500A1-0115 5 MHz low aging SC-Cut OCXO has low profile of 10 mm. It features 20 x 20 mm THT enclosures, stability of better than ±8 ppb, less than 50 ppb aging over 6 yrs, and LVCMOS and sine wave output. At 5 MHz, unit offers typical phase noise of -100 dBc/Hz at 1 Hz; 120 dBc/Hz at 10 Hz; -140 dBc/Hz at 100 Hz; -145 dBc/Hz at 1 kHz; and 150 dBc/Hz at 10 kHz. OCXO needs no manual adjustment.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Oven Controlled Crystal Oscillators (OCXO)

LVDS VCXO has 0.75 MHz to 1.0 GHz frequency range.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Nov 2008 07:43:43 -0600

Supplied in 7 x 5 mm package, FVXO-LC72 operates from 2.5 V and utilizes ASICs designed with focus on noise reduction technologies as well as lower levels of jitter. Configurable frequency control solution employs third order Delta Sigma Modular to reduce noise, while additional technologies enable selection of output type, input voltages, and temperature performance features. RoHS-compliant oscillator offers frequency resolution to 6 decimal places and absolute pull range of +50 ppm.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Crystal Oscillators (VCXO)

VCO operates from 3,901-4,101 MHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 31 Oct 2008 07:43:19 -0600

Available with control voltage range of 0.1-16 V, CVCO55CC-3901-4101 VCO is suited for use in applications such as digital radio equipment and base stations. Packaged in 0.5 x 0.5 in. SMD package, unit features typical phase noise of -104 dBc/Hz @ 10 KHz offset, output power of +5.0 dBm, and second harmonic suppression of -20 dBc typical. Input voltage is 8 V, with max current consumption of 40 mA, and pulling and pushing are minimized to 3.00 MHz and 0.50 MHz/V, respectively.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

PLL Integrated Circuit supports synchronous Ethernet.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 28 Oct 2008 07:33:32 -0600

Offering 5 x 7 mm quartz-based PLL solution, Model CD-700 can be phase lock looped to 25 MHz reference that varies as much as ±100 ppm and can provide clock-smoothed output with less than 1 ps rms over 12 kHz to 20 MHz jitter. Unit includes digital phase detector, op-amp, and additional integrated functions for use in digital synchronization applications. Product delivers low jitter timing distribution in support of ITU G.8262 standard for synchronous Ethernet.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Integrated Circuits (IC) | Voltage Controlled Crystal Oscillators (VCXO)

Voltage Controlled Oscillator operates from 3,619-3,711 MHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Oct 2008 07:44:44 -0600

Supplied in 0.5 x 0.5 in. SMD package, CVCO55CC-3619-3711 operates from 3,619-3,711 MHz with control voltage range of 0.1-16 V. Typical phase noise is -106 dBc/Hz @ 10 KHz offset, and output power is +5.0 dBm typ. Input voltage is 8 V, with max current consumption of 40 mA; pulling and pushing are minimized to 3.00 MHz and 0.50 MHz/V, respectively; and second harmonic suppression is -20 dBc typ. Areas of use include digital radio equipment, fixed wireless access, and base stations.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

VCO operates from 3,366-3,597 MHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Oct 2008 07:44:01 -0600

With control voltage range of 0.1-16 V, Model CVCO55CC-3366-3597 has typical phase noise of -106 dBc/Hz @ 10 kHz offset. It features 8 V input voltage, max current consumption of 40 mA, 5.0 dBm output power, and second harmonic suppression of -20 dBc typical. Pulling and pushing are minimized to 3.00 MHz and 0.50 MHz/V, respectively. Applications include digital radio equipment, fixed wireless access, satellite communications systems, and base stations.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

Wideband VCO exhibits optimal phase noise performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Oct 2008 07:41:13 -0600

Operating in L-band from 1,250-2,350 MHz with tuning voltage range of 0-20 Vdc, RoHS-compliant V600ME02-LF features typical phase noise of -96 dBc/Hz @ 10 KHz offset and typical tuning sensitivity of 75 MHz/V. It delivers typical output power of 8 dBm at 5 Vdc supply while drawing 20 mA (typ) over -5 to +85ºC range and comes in 0.5 x 0.5 x 0.22 in. MINI package. Uses include test equipment applications requiring optimized wideband and phase noise performance.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO) | Low Noise Oscillators

Low-Phase Noise VCO has optimal 2nd harmonics suppression.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 09 Oct 2008 07:37:14 -0600

Operating in S-band from 1,700-2,496 MHz with tuning voltage range of 2-20 Vdc, RoHS-compliant V674ME06-LF features typical phase noise of -91 dBc/Hz @ 10 KHz offset and typical tuning sensitivity of 72 MHz/V. It delivers typical output power of 7 dBm at 10 Vdc supply while drawing 23 mA (typ) over -10 to +85ºC range and comes in 0.5 x 0.5 x 0.13 in. MINI package with low shield. Uses include satellite communications applications.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO) | Low Noise Oscillators

S-Band VCO features ultra low phase noise.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 09 Oct 2008 07:37:02 -0600

Operating at 2,900 MHz with tuning voltage of 0.5-4.5 Vdc, coaxial resonator-based Model CRO2900A-LF features typical phase noise of -115 dBc/Hz at 10 KHz offset and typical tuning sensitivity of 9 MHz/V. Device delivers typical output power of 3.5 dBm at 5 Vdc supply while drawing 19 mA over temperature range of -10° to 75ºC. Housed in MINI package with shield measuring 0.50 x 0.50 x 0.22 in., RoHS-compliant VCO features typical 2nd harmonic suppression of -16 dBc.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

Miniature Oscillators are offered in 0.75-250 MHz range.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 09 Oct 2008 07:36:12 -0600

Supplied in 3.2 x 2.5 mm package, XpressO 3.3 V HCMOS oscillators are available in ±50 and ±100 ppm stabilities with -4 to +158°F operating temperature range. RoHS-compliant products feature gold over nickel termination finish and incorporate ASICs that promote performance and flexibility. In addition to low-noise architecture, oscillators employ third order DSM noise reducing technology. Areas of use include applications requiring low jitter in compact package.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: RF Oscillators | Oscillators

UHF-Band VCO features low phase noise.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Oct 2008 07:41:25 -0600

Operating from 820-1170 MHz with tuning voltage range of 0.5-15 Vdc, RoHS-compliant CLV0975B-LF features typical phase noise of -109 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 31 MHz/V. It is designed to deliver typical output power of 0.25 dBm at 5 Vdc supply while drawing 20 mA (typ) over -40 to +85ºC range. VCO offers typical 2nd harmonic suppression of -12 dBc and comes in 0.50 x 0.50 x 0.22 in. MINI package with shield.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO) | Low Noise Oscillators

RoHS-Compliant VCO is optimized for low phase noise.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Oct 2008 08:06:09 -0600

Operating in VHF-band from 205-350 MHz with tuning voltage range of 0.5-11.5 Vdc, RoHS-compliant V350ME18-LF features typical phase noise of -109 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 14 MHz/V. It delivers typical output power of 0 dBm at 3.3 Vdc supply while drawing 10 mA (typ) over -40 to +85ºC range. VCO features typical 2nd harmonic suppression is -13 dBc and comes in 0.50 x 0.50 x 0.22 in. MINI package with shield.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)

VHF-Band VCO comes in 0.3 x 0.3 x 0.08 in. package.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Oct 2008 07:38:57 -0600

Operating from 284-294 MHz with tuning voltage of 0.3-3 Vdc, Model SMV0290A-LF features typical phase noise of -118 dBc/Hz at 10 kHz offset and typical tuning sensitivity of 9 MHz/V. Device delivers typical output power of -1 dBm at 3.3 Vdc supply while drawing 17 mA over temperature range of -40 to 85°C. Suited for automated surface mount assembly and reflow, RoHS-compliant oscillator targets handheld radio applications.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Controlled Oscillators (VCO)