ThomasNet Industrial Newsroom -

Voltage Controlled Oscillator features low phase noise.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:46 -0500

Operating at 1,915-1,925 MHz with tuning voltage of 0-5 Vdc, Model CRO1920C-LF features typical phase noise of -119 dBc/Hz at 10 KHz offset and tuning sensitivity of 6 MHz/V. Unit delivers 3 dBm output power at 8 Vdc supply while drawing 18 mA over temperature range of -10 to 75°C. Housed in 0.5 x 0.5 x 0.22 in. MINI-16-SM package, RoHS-compliant VCO offers -15 dBc typical harmonic suppression and is suited for satellite communication and fixed wireless applications.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO) | Low Noise Oscillators

VCO offers typical output power of +7 dBm.

info@productnews.com (ThomasNet News) — Tue, 03 Nov 2009 08:38:39 -0500

Operating from 500-1,000 MHz with control voltage range of 0.5-18.0 V, CRBV55CW-0500-1000 RedBox VCO features typical phase noise of -104 dBc/Hz at 10 KHz offset. It is packed in 1.25 x 1.25 x 0.58 in. aluminum enclosure with SMA connectors that enables plug-and-play integration. Product features input voltage of 12 V, with max current consumption of 20 mA. Pulling and pushing are minimized to 4.0 MHz and 2.0 MHz/V, respectively. Second harmonic suppression is -5 dBc typical.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO)

Crystal Oscillator has high-frequency differential outputs.

info@productnews.com (ThomasNet News) — Tue, 03 Nov 2009 08:38:25 -0500

Model DS4625 LVPECL crystal oscillator produces dual-output-frequency combinations ranging from 100-625 MHz. It ensures jitter performance of less than 1.0 psec RMS at 12 kHz to 20 MHz for high current, high frequency, and differential output applications. Packaged in 5 x 3.2 mm LCC, it is based on LC-PLL IC that uses fundamental AT-cut crystals, so operation isn't affected by frequency deviation. Product operates in temperatures from -40 to +70°C.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Crystal Oscillators | Low Noise Oscillators

Sine Oscillator has radiation-tolerant design.

info@productnews.com (ThomasNet News) — Mon, 02 Nov 2009 08:40:52 -0500

Offering designers hybrid solution to meet 100 krad applications, high-reliability OSC-15803 suits space applications that use synchro and resolver position circuits that require reference sine wave to drive synchro or resolver inputs. Features include programmable output frequency from 400 Hz to 20 kHz, scalable voltage output to 8.8 V, and temperature range of -55 to +125°C, with class H or K process available.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Oscillators | Sinusoidal Module Oscillators

Voltage Controlled Oscillator minimizes push/pull effects.

info@productnews.com (ThomasNet News) — Thu, 29 Oct 2009 08:31:57 -0500

Operating from 500-1,000 MHz with control voltage range of 0.5-18.0 V, CRBV55CW-0500-1000 RedBox VCO features typical phase noise of -104 dBc/Hz @ 10 kHz offset and typical output power of +7 dBm. Product is supplied in 1.25 x 1.25 x 0.58 in. aluminum enclosure with SMA connectors, enhancing durability and providing plug-and-play integration. Other features include 12 V input, max current consumption of 20 mA, and typical second harmonic suppression of -5 dBc.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO)

UHF Band VCO features low phase noise.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:12 -0500

Operating from 200-400 MHz with tuning voltage range of 1-16 Vdc, V350ME24-LF has typical phase noise of -95 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 16 MHz/V. RoHS-compliant VCO (Voltage-Controlled Oscillator) delivers typical output power of 3 dBm at 10 Vdc supply while drawing 16 mA (typ) over -20 to +55°C range. Typical second harmonic suppression is -20 dBc, and MINI-14S package measures 0.5 x 0.5 x 0.22 in.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO)

VCO offers typical output power of +5.5 dBm.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:38:06 -0500

Operating at 1,000-2,000 MHz with control voltage range of 1.0-20.0 V, CRBV55CW-1000-2000 features typical phase noise of -100 dBc/Hz at 10 kHz offset. VCO is enclosed in 1.25 x 1.25 x 0.58 in. aluminum enclosure with SMA connectors that enables plug-and-play integration. It has input voltage of 10 V, with max current consumption of 25 mA. Pulling and Pushing are minimized to 15.0 MHz and 5.0 MHz/V, respectively, and second harmonic suppression is -10 dBc typical.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Low Noise Oscillators | Voltage Controlled Oscillators (VCO)

SMD TCXOs are available in AEC-Q200 approved versions.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:10 -0500

Respectively supplied in packages up to 3.2 x 2.5 x 1.0 mm and 2.5 x 2.0 x 0.8 mm, KT3225 and KT2520 series offer frequency stability of ±0.5 ppm over -40 to +85°C range and frequency stability of ±3.0 ppm from -40 to +105°C. Applications for these temperature compensated crystal oscillators (TCXOs) include automotive GPS systems, GPS modules, marine navigation equipment, and high-end industrial electronics.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Temperature Compensated Crystal Oscillators (TCXO) | Crystal Oscillators

Microwave Signal Generators suit EW signal simulation.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:22 -0500

Covering 100 kHz to 50 GHz, 2400C and 2500B microwave signal generator models are available with Automation Xpress (AX) software that facilitates and accelerates creation of various test signals, including antenna scan modulation. AX, working in PC environment, aids setup of signal simulation scenarios. List mode, command-line interpreter with script and loop capability, and auto-programming capability also aid in developing and debugging test program sets.

This story is related to the following:
Electronic Components and Devices
Software

Search for suppliers of: Signal Generators | Simulation Software

Compact Oscillators are suited for GPS Applications.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:36 -0500

With footprint of only 3.2 x 2.5 mm and height of 1.2 mm, FOX923-GP Series comes with stability of up to ±0.5 ppm across operating temperature range of -30 to 85°C. RoHS-compliant ceramic SMD devices offer frequency range from 16-27 MHz, and have input current of 1.5 mA in frequencies from 16-23 MHz and 1.7 mA from 24-27 MHz. Available as TCXOs or VCTCXOs, products come in supply voltages from 1.8-3.3 V. Stability over supply voltage change is ±0.3 ppm and ±0.2 ppm over load change.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Surface Mount Oscillators | Voltage Controlled, Temperature Compensated Crystal Oscillators (VCTCXO) | Temperature Compensated Crystal Oscillators (TCXO)

UHF-Band VCO features ultra low phase noise.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:35 -0500

Operating from 540-710 MHz with tuning voltage range of 0.5-11.5 Vdc, Model CLV0625B-LF features typical phase noise of -114 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 20 MHz/V. RoHS-compliant VCO delivers typical output power of 1 dBm at 3.3 Vdc supply while drawing 27 mA (typ) over -40 to +85°C range. It has typical second harmonic suppression of -15 dBc and comes in 0.5 x 0.5 x 0.16 in. MINI-14S-LOW package.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO)

Clock Oscillators contain swept quartz crystals.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:32 -0500

Housed in 5 x 7 mm enclosure, Models 1118E, 1118R, and 1118B include Swept Quartz crystals, which eliminate potential for significant frequency shifts. Units are governed by OS-68338 document, which ensures they perform to highest expectations for space-qualified, hybrid clocks. Designed for standard 5.0 Vdc operation, oscillators also exceed stringent MIL-STD-202 shock and vibration levels normally imposed for tactical and space flight environments.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Sweep Oscillators | Military Specification Oscillators | Crystal Oscillators | Clock Oscillators

Surface Mount TCXOs suit clipped sinewave applications.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:47 -0500

Capable of holding sub 1 ppm stabilities over -30° to 85°C temperature range, D53G Series sub-miniature precision TCXOs suit Stratum 3, GPS receivers, instrumentation, Femtocell, FTTH, and FTTC applications. Available in 5 x 3.2 mm surface mount package, units feature 3.3 Vdc operational voltage, frequency stability at ±0.50 ppm, and less than 1 pS RMS jitter. TCXOs are RoHS compliant, and come in tape and reel packaging.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Surface Mount Oscillators | Temperature Compensated Crystal Oscillators (TCXO)

Programmable Pulse Generator delivers 5 ppb stability.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:41 -0500

Model PB-5 NIM Pulser offers 5 ppb stability over temperature changes, allowing end users to test the linearity and stability of demanding circuits. Included front end software utility, PB-5 WinControl, expands functionality and test options for laboratory users, allowing them to concurrently control up to 8 pulse generators to synchronize outputs or test multiple systems. Also, numerous settings may be stored and recalled in computer to accelerate test process.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Pulse Generators

S-Band VCO operates from 2,000-4,000 MHz.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:38 -0500

Along with tuning voltage range of 0-24 Vdc, V600ME14-LF features typical phase noise of -89 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 110 MHz/V. RoHS-compliant VCO delivers typical output power of 10 dBm @ 5 Vdc supply while drawing 35 mA (typ) over -40 to +85°C range. Featuring typical second harmonic suppression of -15 dBc, product comes in 0.5 x 0.5 x 0.16 in. MINI-16-LOW package. Areas of use include satellite communication and test and measurement applications.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO)

RF Vector Signal Generator optimizes throughput, phase noise.

info@productnews.com (ThomasNet News) — Mon, 05 Oct 2009 08:27:01 -0500

Used for design verification or production testing, Model 2920A provides signal generation bandwidth options up to 80 MHz with frequency range of 10 MHz to 4 or 6 GHz. MIMO testing system solution, which can tune to new frequency on DUT's operating band in 300 µsec or less, offers electronic attenuation and fast-tracking, automatic level control loop. Ultra Low Phase Noise option can provide phase noise levels of less than or equal to -135 dBc/Hz at 300 kHz offset on 2 GHz carrier.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Signal Generators

VCO offers output power of +9 dBm.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:32 -0500

Operating from 200-239 MHz with control voltage range of 0.5-4.5 V, CRBV55FL-0200-0239 features typical phase noise of -123 dBc/Hz at 10 kHz offset. Housed in 1.25 x 1.25 x 0.58 in. robust aluminum enclosure with SMA connectors, VCO enables plug-and-play integration into any application. It features input voltage of 5 V, with max current consumption of 25 mA. Pulling and pushing are minimized to 1.0 MHz and 1.0 MHz/V, respectively, and second harmonic suppression is -20 dBc, typical.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO)

PLL/Synthesizer operates from 3,900-4,300 MHz.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:25 -0500

With typical step size of 2,500 KHz, model CPLL58-3900-4300 wraps VCO around PLL in 0.582 x 0.8 x 0.15 in. SMD package and requires only external frequency reference and supply voltages. It is programmed using standard 3-line interface - data, clock, and load enable - and exhibits typ phase noise of -95 dBc/Hz @ 10 kHz offset with min output power of 3 dBm. VCO voltage is 5 Vdc, PLL voltage is 3 Vdc, and second harmonic suppression is -15 dBc typ.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Frequency Synthesizers | Integrated Circuits (IC) | Phase Locked Oscillators

VCO features ultra low phase noise.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:54 -0500

Operating at 3,400 MHz with tuning voltage of 0.5-4.5 Vdc, S-band Model CRO3400C-LF features typical phase noise of -112 dBc/Hz at 10 kHz offset and typical tuning sensitivity of 5 MHz/V. Unit delivers output power of 3 dBm at 5 Vdc supply while drawing 24 mA over temperature range of -40 to 85°C. Housed in MINI-16-SM package measuring 0.5 x 0.5 x 0.22 in., RoHS-compliant voltage controlled oscillator features typical harmonic suppression of -20 dBc.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Voltage Controlled Oscillators (VCO) | Low Noise Oscillators

GPS Receiver Testing Platform offers turnkey operation.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:50 -0500

URT(TM) v5.0 lets RF manufacturers generate, record, and play back common radio, video, and navigation signals. While GUI facilitates operation, feature set eliminates manual entry of waypoints to accommodate need for reduced scenario creation time and efficient TMC testing. NAVASIM Toolkit lets users create routes and scenarios using Tele Atlas maps, while G-SIM Toolkit offers GPS Simulator software designed for real-time GPS L1 C/A constellation simulation for up to 12 satellites.

This story is related to the following:
Test and Measuring Instruments
Electronic Components and Devices

Search for suppliers of: Signal Simulators | Signal Generators | Signal Analyzers