ThomasNet Industrial Newsroom -

Instrumentation Amplifier targets DAQ applications.

info@productnews.com (ThomasNet News) — Thu, 25 Jun 2009 08:28:44 -0500

Compatible with all 12, 16, or 24-bit A/D devices, USB-controlled, single-channel Model USBPGF-S1(TM) consists of programmable signal conditioning instrumentation amplifier and low pass filter. Users can mix and match filter characteristics and independently select and program AC or DC coupling, corner frequency, and gain steps up to x1000 in single-ended or differential measurements. Each can be configured as 8-pole Butterworth, Bessel, elliptic, or linear phase filter.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Low-Pass Filters | Instrumentation Amplifiers | Signal Conditioners

Switch Filter Modules suit multiband, multimode 3G handsets.

info@productnews.com (ThomasNet News) — Wed, 04 Mar 2009 08:32:07 -0500

Along with single-pole nine throw pHEMT switch, RF1194 integrates quad-band GSM/GPRS/EDGE transmit low-pass filtering and 4 GSM/GPRS/EDGE receive surface acoustic wave filters. Model RF1195 integrates single-pole ten throw pHEMT switch and builds on RF1194 architecture by providing additional high-linearity port for 4 total symmetrical WCDMA/HSPA+ Tx/Rx ports. Both cellular switch filter modules come in pin-to-pin compatible, 4.5 x 4.5 x 1.2 mm packages.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Chemical Processing and Waste Management
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: RF Components | RF Integrated Circuits | Surface Acoustic Wave (SAW) Filters | Low-Pass Filters | RF Switches | Circuit Control Switches

Filters/ADC Drivers suit I/Q demodulator channel filtering.

info@productnews.com (ThomasNet News) — Thu, 08 Jan 2009 08:38:42 -0500

Broadband active filters/ADC driver amplifiers include LTC6603, LTC6601-1, LTC6605-7, LTC6605-10, and LTC6605-14. Model LTC6603 features dual matched programmable ninth-order switched capacitor linear-phase filter and ADC driver, where as LTC6601-1, is low noise 0.5% tolerance lowpass active filter and ADC driver with configurable bandwidth from 5-28 MHz. LTC6605-7/-10/-14, are second-order linear phase dual matched lowpass active filters having bandwidths of 7, 10, and 14 MHz, respectively.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Frequency Amplifiers | Broadband Amplifiers | Active Filters | Low-Pass Filters | Signal Process Filters

Lowpass Filter has differential amp, guaranteed matching.

info@productnews.com (ThomasNet News) — Mon, 15 Sep 2008 07:40:52 -0500

Supplied in 4 x 7 mm QFN SMT package, LT6604-xx series is comprised of dual fixed frequency lowpass active filters/amplifiers with 2.5, 5, 10, and 15 MHz cutoff frequencies. Products consist of 2 matched, fully differential amplifiers combined with fourth order filters approximating Chebyshev lowpass response. Differential output stage drives directly into ADCs with minimum distortion/noise, and each amplifier has output swing of 2 Vp-p min as well as adjustable common-mode voltage.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Low-Pass Filters

Filter Wheels come pre-loaded with 1 in. dia filters.

info@productnews.com (ThomasNet News) — Thu, 13 Dec 2007 07:48:59 -0500

Six-position TECHSPEC® Filter Wheels are suited for DNA sequencing, fluorescence microscopy, and laser beam attenuation applications. UV/VIS ND and NIR ND packages include filters with ODs from 0.5-3.0. VIS shortpass and longpass packages include filters with cut-off or cut-on wavelengths from 500-750 nm, while NIR shortpass and longpass packages include cut-off and cut-on wavelengths from 800-1,050 nm. Bandpass filters have glass reference numbers of BG38, BG12, U340, RT830, U330, and U360.

This story is related to the following:
Electronic Components and Devices
Optics and Photonics

Search for suppliers of: Neutral Density Filters | Low-Pass Filters | Long Wave Pass Filters | Dichroic Filters | Bandpass Filters | Short Wave Pass Filters

Optical Low Pass Filter helps combat moire patterns.

info@productnews.com (ThomasNet News) — Thu, 15 Nov 2007 07:49:11 -0500

Suited for use in digital cameras, optical low pass filter (OLPF) employs structure wherein wide-band phase retardation film is sandwiched between pair of quartz plates. This design provides uniform light separation at all wavelengths of visible light, eliminating moire patterns across visible spectrum. Requiring only 2 quartz plates, this OLPF enhances quality of digital cameras and enables them to be made thinner.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Optics and Photonics

Search for suppliers of: Optical Filters | Low-Pass Filters

Planar Lowpass Filter operates in 4-6 GHz C-band.

info@productnews.com (ThomasNet News) — Thu, 25 Jan 2007 06:32:49 -0500

Measuring 0.55 x 0.12 x 0.025 in., Model IMF-2345 features input power rating of 15 W with 100°C baseplate temperature. With low insertion loss and consistency from part to part, 7-section device is suited for harmonic suppression in RF/Microwave and communications systems where multi-layer construction or otherwise commodity level device performance will not suffice.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Low-Pass Filters

Low Pass Filter Modules suit ADSL and VDSL2 applications.

info@productnews.com (ThomasNet News) — Fri, 05 Jan 2007 07:47:28 -0500

Combining xDSL filter chokes and capacitors in one size-optimized casing, LCR Modules are designed according to standards of ANSI, ETSI, ITU, and various country requirements. Modules have uniform pinning and are fully RoHS compliant. All provide optimal filter characteristics in insertion loss, return loss, and stop band attenuation.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Low-Pass Filters

Low Pass SMT Filter suits RF and microwave applications.

info@productnews.com (ThomasNet News) — Tue, 29 Mar 2005 07:20:49 -0500

Measuring .442 x .184 x .030 in., S Band 2.4 GHZ planar surface mountable thick film filter features passband up to 2,500 MHz with passband ripple of .01 dB. Second and third harmonic rejection is 25 dB min, and VSWR is 1.1:1. Compact unit, which incorporates 5 sections with 50 ohm input and output, is suited for applications such as wireless local area networks, microwave communication links, radar systems, and wireless sensors and controls.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Low-Pass Filters | Surface Mount Filters

Filters condition ICP® and charge output sensor signals.

info@productnews.com (ThomasNet News) — Thu, 14 Oct 2004 07:43:50 -0500

Series 474 In-Line Low Pass Filters, used in any low impedance system, attach directly to input of readout instruments to eliminate potentially troublesome high-amplitude resonance peaks. Series 477 In-Line Low Pass Filters for ICP® sensors provide 12 dB/octave or 40 dB/decade roll-off for attenuating high frequency, high-amplitude signals associated with structural resonances. Custom filter options and in-line signal attenuators are available.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Low-Pass Filters | Signal Conditioner Filters | Signal Conditioners

Low Pass Filter works as drop-in component.

info@productnews.com (ThomasNet News) — Fri, 30 Apr 2004 07:44:43 -0500

Measuring .550 x .440 x .025 in., thick film drop-in low pass filter is integral, planar, and surface-mountable. Bilaterally symmetric design incorporates lumped/distributed parameters and contains 7 sections with 50 Ohm input and output. Passband is 1,200 MHz ±250 MHz, VSWR is 1.1 VSWR over 20% bandwidth, and insertion loss is .5 dB over entire passband. Rejection at 2.5 GHz is â�"25 dB min and is maintained to 4.6 GHz.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Low-Pass Filters

Dual Channel Filter Module is suited for OEMs.

info@productnews.com (ThomasNet News) — Wed, 23 Jul 2003 07:36:08 -0500

Low-pass filter module AAF-2Fe provides 2 channels of noise reduction and anti-alias filtering that is tunable to bandwidths from 0.1â�"200 kHz. Compatible with 8, 12, and 16-bit A/D modules and boards, product incorporates features such as differential instrumentation gain, factory set to specification from 1xâ�"10000x; true minimal 1.5 Vm or better DC offset; and +10 V input and output range. Output impedance is less than 0.001 ohms, and common mode rejection is 90â�"110 dB.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Low-Pass Filters | Anti-Aliasing Filters

Highpass/Lowpass Filter is controlled by microprocessor.

info@productnews.com (ThomasNet News) — Wed, 02 Oct 2002 07:49:31 -0500

Model 601 contains tunable 8-pole Butterworth highpass filter followed by tunable 8-pole Butterworth lowpass filter. Both filter responses are flat in pass band (unity gain) and roll off at 96 dB per octave beyond corner frequency. Corner frequencies can be set from 100 Hz to 40 kHz at front panel or over serial link from PC. Unit includes input analog anti-aliasing lowpass filter, variable gain output amplifier, and analog lowpass output filter.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: High-Pass Filters | Low-Pass Filters | Tunable Filters

Filter Card provides DC offset compensation.

info@productnews.com (ThomasNet News) — Tue, 08 Jan 2002 13:28:27 -0500

AAF-2, 2 to 8 channel, tunable low-pass filter features selectable frequency ranges in Butterworth, Bessel, Cauer, or Linear Phase characteristics that eliminate noise and alias errors while providing DC and Gain accuracy for 16-bit data acquisition systems. Filter channels are fully isolated from PCI bus, and are continuously tunable from 0.1Hz to 200kHz. Input and output range is up to ±l0V while gain accuracy is ±0.00ldB@lkHz.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Low-Pass Filters | Anti-Aliasing Filters