ThomasNet Industrial Newsroom -

Spring Pin Connectors offer optimum contact.

info@productnews.com (ThomasNet News) — Mon, 23 Nov 2009 08:30:04 -0500

Suitable for portable electronics, Spring Pin Connectors features multiple contact points with narrow pin-pitched effect, stable contact pressure, and 40 µ in. gold plating. All materials meet lead-free requirements. Mating terminal can be flat, enabling one-touch connect and disconnect. Slightly inaccurate distance between PCB and body does not affect performance.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Connectors | Lead Free Connectors

Micro Push-Pull Connectors have IP67 rating.

info@productnews.com (ThomasNet News) — Fri, 13 Nov 2009 08:31:51 -0500

Series 420 subminiature push-pull cable connectors, commonly used for small applications in medical and commercial industries, have max diameter of 9.5 mm and accept cables with diameters from 3-4 mm. Available in male and female versions, field-attachable and panel-mount solutions have 3, 4, or 5 gold-plated contacts. When properly mated, connection is sealed to IP67 standards to protect against ingress of liquids and debris.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Subminiature Connectors | Push-Pull Connectors | Cable Connectors

SMB Connectors withstand high vibration environments.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:31 -0500

With push-lock feature, SMB Connectors require disengagement force of 5 lb minimum. Locking shell pushes over mated interfaces, locking interface while allowing full rotation of mated pair. Pulling back shell allows interfaces to be disengaged. Hermetically sealed and IP68 rated, connectors feature 0-4 GHz reflection frequency range and are usable up to 10 GHz. Mating pairs include right angle plug with crimp attachment for RG-174U cable.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Printed Circuit Board (PCB) Connectors | Locking Connectors | Hermetically Sealed Connectors | Electrical Bulkhead Connectors | Subminiature Connectors | RF Connectors

Board-to-Board RF Coaxial Interconnects allow larger gaps.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:11 -0500

With impedance matching insulator optimized for larger operating gap between connectors, SMP-MAX large misalignment solution lets engineers handle max board-to-board distance tolerance of up to .078 in. gap without spring. It also offers 3° tilt (radial travel) and 1.2 max VSWR up to 3 GHz. IMP-Spring, SMP-Spring, and MMBX-Spring are spring-loaded solutions for board-to-board distance misalignment tolerances of up to .078 in. and tilt up to 4.5°. They offer VSWR down to 1.15 at 3 GHz.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Surface Mount & Through-Hole Interconnects | RF Connectors | Coaxial Connectors | Board To Board Connectors

Card Edge Connectors support 1.58 mm add-on graphics cards.

info@productnews.com (ThomasNet News) — Mon, 26 Oct 2009 08:53:53 -0500

Featuring 1.00 pitch, Card Edge Connectors support PCI Express® standards for signal and power as well as auxiliary signals at interface between motherboard and add-in card. Units are rated at 1 A/contact and offer x1, x4, x8, x16, x24, and x32 contact positions to accommodate range of bandwidth requirements. Serial lanes are comprised of 2 differential wire pairs that support data transfer rate of 500 MB/s in each direction, per lane. They feature 2.5 GHz clock rate and 5 GT/s bit rate.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: High Density Connectors | Card Edge Connectors

Controlled Impedance Interconnects maximize PCB real-estate.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:19 -0500

Featuring 5 mm body and .8 mm pitch, Q Rate® System (QRM8/QRF8 Series) controlled impedance interconnects employ Edge Rate(TM) contact system. Contacts, combined with integral metal power/ground plane rated to 8.9 A, promote optimal electrical performance, while 1.2 mm contact wipe distance improves allowable angle during mating/unmating. Performance rating is 9.5 GHz SE and 8.5 GHz DP at 7 mm stack height and -3 dB insertion loss.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Surface Mount & Through-Hole Interconnects

Distribution Amplifier works as VGA video splitter.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:31 -0500

Providing 1 VGA input and 16 VGA outputs, Model AT-VGA116 is capable of splitting any signal from 1 VGA source to 16 separate displays with compatible VGA inputs simultaneously. Device allows cascading of up to 24 units to meet any AV application. With max bandwidth of 1 GHz, splitter will support highly defined video in multiple resolutions up to 2,048 x 2,048. Applications include store video displays, education and worship facilities, and digital signage.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Distribution Amplifiers | Video Splitters

BGA Adapters connect 0.50 mm devices to 1.00 mm boards.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:24 -0500

Designed to adapt smaller pitch devices to larger footprints, Switch-A-Pitch Adapters eliminate need for laser-drilled microvias on motherboards while enabling use of standard line and trace spacing down to 0.003 in. Adapters have tops with BGA landing pads on 0.50 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch. Operating up to 221°F for FR4 or up to 266°F for lead-free, adapters feature non-solder mask defined pads finished with electroless nickel immersion gold.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices

Search for suppliers of: Socket Adapters | Ball Grid Array (BGA) Sockets | Printed Circuit Board (PCB) Connectors | Adapters

Multipin Connectors offer tool-less installation.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:33 -0500

Intended for commercial aircraft wiring systems, QM Rectangular Connectors feature quick-lock technology, which withstands shock, vibration, noise, and high temperatures. Track and mate is performed through rail mount installation without tools. Rails are manufactured with high-conductive metal plating on composite shells. Utilizing shell polarization positions and EPXB standard inserts, connectors offer integral strain relief with optional EMI backshell to meet severe airborne requirements.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Rectangular Connectors | Multipin & Coaxial Connectors | Aircraft Connectors

N Connectors are designed for RF transmission applications.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:06 -0500

Designed to meet high-speed, low loss applications, 50 W N Connectors are tested and verified from 30 MHz to 6 GHz, with maximum VSWR of 1.25:1. Series consists of 8 male N connectors (plugs) and 8 female N connectors (jacks). Insulators are made of teflon, center contacts are gold-plated, and outer contacts are either silver or nickel-plated. Suitable applications include cell site transmissions, broadcast STLs and RPUs, and wireless microphone diversity antennas.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Broadcast Connectors | Coaxial Connectors | RF Connectors | Cable Connectors

Multipin, Rubber-Molded Plugs are IP68-rated.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:18 -0500

Round 3-wire, 30 A 3MNFP30 Male and 3FP30 Female multipin rubber-molded plugs and connectors are resistant to water and dust and are submersible in 6 ft of water when caped or mated. They are molded to heavy-duty, 3-conductor type, 600 V SOOWA cable with solid hypalon rubber. Industrial-/commercial-grade quick disconnect connectors are available in cable sizes of 14, 12, and 10 AWG.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Mounting and Attaching Products

Search for suppliers of: Electric Plugs & Receptacles | Waterproof Connectors | Quick Connect/Disconnect Connectors | Polarized Connectors | Molded Connectors | Electric Power Connectors | Connectors | Locking Electric Plugs | Corrosion Resistant Electric Plugs | Electric Circuit Connectors

Hermetic Receptacle features aluminum compatible design.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:51 -0500

Designed for 25-pin configuration, microComp Hermetic Receptacle provides insulation resistance of greater than 5,000 MW at 500 Vdc when tested in IAW MIL-STD 1344, Method 3003. Kryoflex® polycrystalline ceramic sealed unit has leak rate of less than 1 x 10-9 cc/sec helium at one atmospheric differential pressure. Operating from -55 to +170°C, receptacle is built with beryllium copper alloy contacts that are finished in nickel/gold.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Rectangular Connectors | Hermetically Sealed Connectors

Flip Type ZIF Connector accepts standard flexible flat cable.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:03 -0500

With 0.5 mm pitch and height of 2 mm, series HF601 has cover that can be opened widely and accepts insertion of standard flexible flat cable (FFC). This zero insertion force (ZIF) connector can contact FFC with or without positioning part, but positioning part ensures increased safety against extraction. Design promotes plug security, and cover locks with audible click when closed. Pin counts - 10, 20, 26, 30, 40, 45, 50, and 60 - provide application flexibility.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: Cable Connectors | Board To Cable Connectors

Card Connector/Reader suits high mating cycle applications.

info@productnews.com (ThomasNet News) — Mon, 05 Oct 2009 08:27:03 -0500

Designed for top and reversed mount applications, FMS008-4000-xx is available with variable reading system for SIM and Smart cards. With low assembly height of 0.95 mm, 8-pin SIM block card reader can be used with separate card recognition switch, which can be mounted on PCB in different positions independently from card reader. Both switch and reader offer contact durability of 10,000 mating cycles.

This story is related to the following:
Electronic Components and Devices
Automatic ID
Computer Hardware and Peripherals

Search for suppliers of: Printed Circuit Board (PCB) Connectors | Card Edge Connectors | Smart Card Readers | Card Readers

Circular Connectors deliver 4-way, 500 Vdc, 20 A solution.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:31 -0500

Suited for medium- and high-volume automotive applications, APD Series direct, in-line and bulkhead sensor connector is resistant to engine, transmission, and brake fluids and operates at temperatures from -40 to +125°C. Recessed contacts ensure operator safety, and 3-point bayonet mating offers vibration resistance and moisture protection up to IP69. Meeting all DIN 72585 specifications, connector can be specified with custom color.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: Automotive Connectors | Circular Connectors | DIN Connectors | Plastic Connectors

RF Edgeboard Connectors optimize audio/video quality.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:51 -0500

Engineered of nickel-plated machined brass, 75 W V-Bite(TM) Female RCA Connectors have gold contacts for optimum signal integrity in audio and video applications. Straight-through contact design provides low reflection factor with VSWR of 1.30. Featuring anti-rotation abilities, connectors snap and lock in place for secure PCB retention during soldering. Units are supported from above and below board to disperse rotational torque relief, minimizing stress on solder area.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Connectors | Printed Circuit Board (PCB) Connectors

Connectors withstand dust, water, and chemical ingress.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:15 -0500

Made of plastic, Hot Shoe Connectors employ spring-loaded or compliant contacts, which maintain positive contact force against mating half of connector. Units tolerate mating misalignment and are often polarized, ensuring they are always correctly mated. Applications include portable equipment where separate battery modules are used, data transfer docking stations, battery charging and data communications equipment, thermal imaging cameras, and handheld scanners.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electronic Connectors | Polarized Connectors | Waterproof Connectors

DIN Rail Connectors come in both single/double volt versions.

info@productnews.com (ThomasNet News) — Wed, 23 Sep 2009 08:35:07 -0500

HV series feature integrated spring lock washer to prevent hexagonal nuts from loosening, and use ring lug/bolt connection technology for safe and secure termination. Products are available with bolts ranging in size from 13-16 mm, and are certified to U.S. standards under CSA International for 1,000 V with range of electrical current ratings from 50-240 A. Series supports switchgear and control applications across variety of industries, including railroad, power and utilities.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: High Current Electric Connectors | DIN Rail Mount Connectors

Miniature Sealed Connectors meet military standards.

info@productnews.com (ThomasNet News) — Mon, 14 Sep 2009 08:32:16 -0500

Designed to meet all MIL-DTL-38999 specifications, Nemesis WT Connectors are fully sealed in unmated state and weigh less than 25 g, which is critical for on-soldier applications. Super Clean version features pull back barrel that allows user to clean connector and return to full operation in seconds. Equipped with micro twist pin gold plated contacts, connectors operate from -40 to +100°C with max current rating of 3 A and voltage rating of 200 Vac rms at sea level.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: Sealed Connectors | Miniature Connectors | Military Specification Connectors

Pre-Wired Panel Connectors have 200 mm long 24 AWG wires.

info@productnews.com (ThomasNet News) — Tue, 08 Sep 2009 08:32:44 -0500

Featuring potted rear termination, pre-wired M12 male panel connectors are sealed to IP68, which can withstand depths of water up to 18 m for 24 hr. Metal housing is made of nickel plated brass and offered with 3, 4, and 8 gold-plated contacts. Available with M20 x 1.5 and PG 13.5 mounting threads, devices are mating compatible with M12 series 713 field-attachable connectors and series 763 cordsets.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: Sealed Connectors | Waterproof Connectors | Wire Connectors | Rack & Panel Connectors